[U-Boot] [PATCH 3/7] fec_imx27: driver for FEC ethernet controller on i.MX27

[Wolfgang Denk]

Dear Johan,

In message <de9b121e0906160012q5975b23cnd320908aee6cd4ab at mail.gmail.com> you wrote:
> Seems like that was the trick. After removing the breakout board it
> works much better.
> 
> I still got some problems which I don't know if its software related.
> Sometimes when I power on the board the ethernet LEDs does not turn
> green and the network does not work. If I power cycle the board a
> number of times the LEDs turn green I can can use the network. Do you
> know if that might be hw related or may it be something with the
> initialization?

This is most likely a hardware problem. Please contach Logic for
information about the required changes on the board.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"May the forces of evil become confused on the way to your house."
- George Carlin