[U-Boot] [PATCH 3/7] fec_imx27: driver for FEC ethernet controller on i.MX27
Ilya Yanok
yanok at emcraft.com
Thu Jun 18 00:19:40 CEST 2009
Hi Johan,
> Seems like that was the trick. After removing the breakout board it
> works much better.
>
> I still got some problems which I don't know if its software related.
> Sometimes when I power on the board the ethernet LEDs does not turn
> green and the network does not work. If I power cycle the board a
> number of times the LEDs turn green I can can use the network. Do you
> know if that might be hw related or may it be something with the
> initialization?
>
> I'll try to test U-boot v2 as you are using and see if it works better.
>
Our customer reported the same problem but we can't reproduce it on our
hardware... Could you please tell me if U-Boot v2 works for you well?
Regards, Ilya.
More information about the U-Boot
mailing list