[U-Boot] [PATCH v4 5/6] MX31: Add basic support for Freescale i.MX31 PDK board.

[Jean-Christophe PLAGNIOL-VILLARD]

On 14:53 Sat 20 Jun     , Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 20:50 Sat 13 Jun     , Magnus Lilja wrote:
> > Add support for Freescale's i.MX31 PDK board (a.k.a. 3 stack board).
> > 
> > This patch assumes that some other program performs the actual
> > NAND boot.
> > 
> > Signed-off-by: Magnus Lilja <lilja.magnus at gmail.com>
> > ---
> >  MAINTAINERS                           |    4 +
> >  MAKEALL                               |    1 +
> >  Makefile                              |    3 +
> >  board/freescale/mx31pdk/Makefile      |   52 +++++++++++
> >  board/freescale/mx31pdk/config.mk     |    1 +
> >  board/freescale/mx31pdk/mx31pdk.c     |   63 +++++++++++++
> >  include/asm-arm/arch-mx31/mx31-regs.h |    2 +
> >  include/configs/mx31pdk.h             |  162 +++++++++++++++++++++++++++++++++
> >  8 files changed, 288 insertions(+), 0 deletions(-)
> >  create mode 100644 board/freescale/mx31pdk/Makefile
> >  create mode 100644 board/freescale/mx31pdk/config.mk
> >  create mode 100644 board/freescale/mx31pdk/mx31pdk.c
> >  create mode 100644 include/configs/mx31pdk.h
> > 
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 1f6008f..8eb54e1 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -528,6 +528,10 @@ Thomas Elste <info at elste.org>
> >  
> >  	modnet50	ARM720T (NET+50)
> >  
> > +Fabio Estevam <Fabio.Estevam at freescale.com>
> > +
> > +	mx31pdk		i.MX31
> > +
> Fabio could you ack it please
ping

Best Regards,
J.