[U-Boot] Comfortable U-boot debug in CodeWarrior

Kysilka Radek Radek.Kysilka at sitronicsts.com
Wed Jun 17 15:41:53 CEST 2009


Does anyone have experience with uboot debugging in CodeWarrior through
USB TAP Controller (Freescale)?

Best Regards
R.K.

-----Original Message-----
From: Wolfgang Denk [mailto:wd at denx.de] 
Sent: Tuesday, June 16, 2009 8:14 PM
To: Kysilka Radek
Cc: u-boot at lists.denx.de
Subject: Re: [U-Boot] Comfortable U-boot debug in CodeWarrior

Dear "Kysilka Radek",

In message
<EE64523F3890964EBCF17918BA421C8C836988 at exalfa.stromtelecom.cz> you
wrote:
>
> 	I would like to ask you for information about uboot debug in 
> CodeWarrior IDE. Do you have any experience with uboot debug for 
> MPC83xx? I did not found project file (mcp) or workspace file (cww) 
> for uboot project. Has anyone already set up a project to do this? Can

> anyone tell me how to make CodeWarrior uboot project file (based on 
> makefile)?

I have yet to hear of successful reports of using CW for U-Boot
debugging, especially when it comes to handling the before / after
reloation to RAM phases.

My best recommendation is: get yourself a BDI3000.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Doubt is a pain too lonely to know that faith is his twin brother.
- Kahlil Gibran


More information about the U-Boot mailing list