[U-Boot] [PATCH 1/3] OMAP3 I2C Fix the sampling clock.

[Tom]

Menon, Nishanth wrote:
>> -----Original Message-----
>> From: Jean-Christophe PLAGNIOL-VILLARD [mailto:plagnioj at jcrosoft.com]
>> Sent: Saturday, June 20, 2009 8:19 PM
>> To: Tom Rix
>> Cc: u-boot at lists.denx.de; Menon, Nishanth; dirk.behme at googlemail.com
>> Subject: Re: [U-Boot] [PATCH 1/3] OMAP3 I2C Fix the sampling clock.
>> 	I'll add a mandatory condition
>> 	this code MUST be test on omap2 too
>>
>> 	I think the TI's dev could help on this
>>     
> Would have been great if we had functional omap2 support in mainline - 2420/2430.. I don't even have one of those boards around :(
>
>   
There is the omap2420h4.
 From the git log, it looks like it was active in 2004-2005.
I do not have one.
If someone wants to send one to me, I will be happy to test the i2c patch.

The i2c init came from the kernel, it looked like that same init code 
was used for 24xx and 34xx. I do not believe there will be any problems 
but if there were, they should be able to dealt with in the board config 
file by overriding the #defines the init code uses.

Tom

> Regards,
> Nishanth Menon
>
>