[U-Boot] MPC8313ERDB u-boot upgrade usb problem
Deepak Gopalakrishnan
Deepak.Gopalakrishnan at Lntemsys.com
Tue Jun 9 12:06:49 CEST 2009
hi
I ran into this problem while trying to include files necessary to include
ehci feature for usb.
It would be of great help if some one cud point in a direction where i can
get help...
Im using MPC8313 board and u-boot.1.3.0 on it.
Regards,
Deepak Gopalakrishnan
Kim Phillips <kim.phillips at freescale.com>
06/09/2009 05:06 AM
To
Deepak Gopalakrishnan <Deepak.Gopalakrishnan at Lntemsys.com>
cc
u-boot at lists.denx.de
Subject
Re: [U-Boot] MPC8313ERDB u-boot upgrade usb problem
On Mon, 8 Jun 2009 15:32:54 +0530
Deepak Gopalakrishnan <Deepak.Gopalakrishnan at Lntemsys.com> wrote:
> Hi
> i am in the process of upgrading the u-boot version from u-boot 1.1.6 to
> 1.3.0 and im stuck up with the usb.
> this is the error im getting
>
> => usb start
> (Re)start USB...
> USB: ACTUAL Board
> Setting Clock...
> PHY Invalid
> Clock setting failed
> Error, couldn't init Lowlevel part
>
> i have no idea wat has gone wrong....
I have no idea what code you're running: there is no occurrence of the
string "PHY Invalid" in the current nor the v1.3.0 versions of mainline
U-Boot. Does this u-boot have support for the USB PHY on your board?
Please try top-of-tree u-boot from git.denx.de and let us know if the
problem persists. That u-boot is what's supported here. fyi, board
support contributions are welcome here too.
Kim
More information about the U-Boot
mailing list