[U-Boot] MPC8313ERDB board reset problem

[Deepak Gopalakrishnan]

yes i think i have found wat was the change that was causing the problem.
I had changed the value of CFG_ENV_SECT_SIZE(which is present in 
include/config/MPC8313ERDB.h) from 0x10000 to 0x20000.
i had to do this because while i issue the command save, i would get an 
error

"Saving Environment to Flash...
Error: end address not on sector boundary"

Can you help me fix this problem....

Regards,
Deepak Gopalakrishnan