[U-Boot] PATCH: Fix examples for OMAP3 boards...

[Jean-Christophe PLAGNIOL-VILLARD]

On 10:34 Thu 18 Jun     , Michael Evans wrote:
> 
> Description:
> The attached patch corrects an error in the examples/Makefile which causes the applications in the examples directory to hang on OMAP3 based boards.  The current Makefile sets -Ttext during linking to 0x0c100000 which is outside of addressable SDRAM memory.  The script corrects the existing ifeq...else...endif logic to look at the VENDOR tag rather than the CPU tag.
> 
> The patch affects the following configs: omap3_beagle_config, omap3_overo_config, omap3_evm_config, omap3_pandora_config, omap3_zoom1_config and omap3_zoom2_config.
> 
> Signed-off-by: Michael Evans <horse_dung at hotmail.com>
> 
> Patch:
> --- examples/Makefile.orig    2009-06-18 10:14:44.000000000 +0100
> +++ examples/Makefile    2009-06-18 10:14:52.000000000 +0100
> @@ -33,7 +33,7 @@ ifeq ($(ARCH),arm) 
>  ifeq ($(BOARD),omap2420h4)
>  LOAD_ADDR = 0x80300000
>  else
> -ifeq ($(CPU),omap3)
> +ifeq ($(VENDOR),omap3)
omap3 is not a vendor but a SOC

Best Regards,
J.