[U-Boot] TSEC ethernet controller problems (crc errors/corruption)

Liu Dave-R63238 DaveLiu at freescale.com
Wed Jun 3 00:22:49 CEST 2009


> > => md e0000118 1
> > e0000118: 00000002    ....
> > 
> > This looks wrong. The MPC8349EMDS board has the exact same 
> setting in
> > that register. Writing 0x0 to the SICRH register did not cause the
> > problem to go away.
> > 
> 
> The MPC8349EMDS config has had that setting since it was imported into
> U-Boot. I've copied the relevant part of include/configs/MPC8349EMDS.h
> below.
> 
> #define CONFIG_SYS_SICRH SICRH_TSOBI1
> 
> This seems wrong for the MPC8349EMDS board. I tried setting 
> the register
> value to 0x0 by hand on my MPC8349EMDS eval board, and the 
> network still
> works as expected.
> 
> Is this a bug in the MPC8349EMDS config?

I will roll back the history to have a check it.


More information about the U-Boot mailing list