[U-Boot] JFFS2 with NAND flash is very SLOW ...

[Stefan Roese]

On Tuesday 02 June 2009 15:02:17 Cote, Sylvain wrote:
> > In my side:
> > MTD0 (720kB): U-boot
> > MTD1 (80kB) : env. Variables
> > MTD2 (12MB) : kernel + initramfs
> > MTD3 (50MB) : rootfs
>
> Maybe it will not help you but I have
>
> MTD0 (all the nand 256M)
> MTD1 uboot+ embedded config 2M RAW
> MTD2 1M JFFS2
> MTD5 config 5M JFFS2
> MTD3 Kernel + initramfs 12M JFFS2
> MTD4 KernelBKp 12M JFFS2
> MTD5 content 224M
>
> Scanning and fsload of the MTD3 partition take 3 seconds with 2009.03
> With 1.3.4 it was something like 6-10 seconds.  But never 1 minute.  I have
> seen that when scanning the content partition of 224M.

Parameters like I-cache and D-cache handling greatly effect this scan time. 
Some platforms have caches enabled others don't. This might explain some 
differences here.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================