[U-Boot] [PATCH v4 6/6] MX31: Add NAND SPL boot support to i.MX31 PDK board.
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Mon Jun 29 23:03:56 CEST 2009
On 20:50 Sat 13 Jun , Magnus Lilja wrote:
> Signed-off-by: Magnus Lilja <lilja.magnus at gmail.com>
> ---
> MAKEALL | 1 +
> Makefile | 14 +++-
> board/freescale/mx31pdk/config.mk | 4 +
> board/freescale/mx31pdk/lowlevel_init.S | 114 +++++++++++++++++++++++++++
> include/asm-arm/arch-mx31/mx31-regs.h | 54 +++++++++++++
> include/configs/mx31pdk.h | 21 ++++-
> nand_spl/board/freescale/mx31pdk/Makefile | 54 +++++++++++++
> nand_spl/board/freescale/mx31pdk/config.mk | 5 +
> nand_spl/board/freescale/mx31pdk/u-boot.lds | 36 +++++++++
> 9 files changed, 297 insertions(+), 6 deletions(-)
> create mode 100644 board/freescale/mx31pdk/lowlevel_init.S
> create mode 100644 nand_spl/board/freescale/mx31pdk/Makefile
> create mode 100644 nand_spl/board/freescale/mx31pdk/config.mk
> create mode 100644 nand_spl/board/freescale/mx31pdk/u-boot.lds
>
> diff --git a/MAKEALL b/MAKEALL
> index 0757064..1f7cab4 100755
> --- a/MAKEALL
> +++ b/MAKEALL
> @@ -553,6 +553,7 @@ LIST_ARM11=" \
> imx31_phycore_eet \
> mx31ads \
> mx31pdk \
> + mx31pdk_nand \
> qong \
> smdk6400 \
> "
> diff --git a/Makefile b/Makefile
> index e445e51..29d1f22 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -376,7 +376,7 @@ $(LDSCRIPT): depend
> $(NAND_SPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
> $(MAKE) -C nand_spl/board/$(BOARDDIR) all
>
> -$(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin
> +$(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
I still does not understand this as NAND_SPL already depend on $(obj)include/autoconf.mk
> cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
>
> $(ONENAND_IPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
> @@ -3115,8 +3115,16 @@ imx31_phycore_config : unconfig
> mx31ads_config : unconfig
> @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31
>
> +
> +.globl lowlevel_init
why twice??
> +
> +#include <asm/arch/mx31-regs.h>
> +#include <asm/macro.h>
> +
> +#define CCM_CCMR_SETUP 0x074B0BF5
> +#define CCM_PDR0_SETUP_532MHZ (PDR0_CSI_PODF(0x1ff) | PDR0_PER_PODF(7) | \
> + PDR0_HSP_PODF(3) | PDR0_NFC_PODF(5) | \
> + PDR0_IPG_PODF(1) | PDR0_MAX_PODF(3) | \
> + PDR0_MCU_PODF(0))
> +#define CCM_MPCTL_SETUP_532MHZ (PLL_PD(0) | PLL_MFD(51) | PLL_MFI(10) | \
> + PLL_MFN(12))
> +
> +#define ESDMISC_MDDR_SETUP 0x00000004
> +#define ESDMISC_MDDR_RESET_DL 0x0000000c
> +#define ESDCFG0_MDDR_SETUP 0x006ac73a
> +
> +#define ESDCTL_ROW_COL (ESDCTL_SDE | ESDCTL_ROW(2) | ESDCTL_COL(2))
> +#define ESDCTL_SETTINGS (ESDCTL_ROW_COL | ESDCTL_SREFR(3) | \
> + ESDCTL_DSIZ(2) | ESDCTL_BL(1))
> +#define ESDCTL_PRECHARGE (ESDCTL_ROW_COL | ESDCTL_CMD_PRECHARGE)
> +#define ESDCTL_AUTOREFRESH (ESDCTL_ROW_COL | ESDCTL_CMD_AUTOREFRESH)
> +#define ESDCTL_LOADMODEREG (ESDCTL_ROW_COL | ESDCTL_CMD_LOADMODEREG)
> +#define ESDCTL_RW ESDCTL_SETTINGS
those macro need to move too config.h
> +
> +.globl lowlevel_init
> +lowlevel_init:
> + /* Also setup the Peripheral Port Remap register inside the core */
> + ldr r0, =ARM_PPMRR /* start from AIPS 2GB region */
> + mcr p15, 0, r0, c15, c2, 4
> +
<snip>
> +
> +# defines $(obj).depend target
> +include $(SRCTREE)/rules.mk
> +
> +sinclude $(obj).depend
> +
> +#########################################################################
> diff --git a/nand_spl/board/freescale/mx31pdk/config.mk b/nand_spl/board/freescale/mx31pdk/config.mk
> new file mode 100644
> index 0000000..198cafc
> --- /dev/null
> +++ b/nand_spl/board/freescale/mx31pdk/config.mk
> @@ -0,0 +1,5 @@
> +PAD_TO := 2048
> +
> +ifeq ($(debug),1)
> +PLATFORM_CPPFLAGS += -DDEBUG
> +endif
I do not think it's board specific
Best Regards,
J.
More information about the U-Boot
mailing list