[U-Boot] [PATCH 3/4] ZOOM2 Add power reset button

[Menon, Nishanth]

> -----Original Message-----
> From: Peter Tyser [mailto:ptyser at xes-inc.com]
> Sent: Wednesday, June 10, 2009 11:26 AM
> > > >>> --- a/drivers/i2c/twl4030_i2c.c
> > > >> All other drivers in drivers/i2c are host adapter drivers.  Ie they
> > > >> implement i2c_read(), i2c_write(), i2c_probe(), and i2c_init().
> The
> > > >> twl4030_i2c.c driver doesn't seem to fit this mold.  Perhaps it
> would
> > > be
> > > >> better placed in drivers/misc or a new drivers/power directory
> similar
> > > >> to Linux?
> > > >
> > > > This function probably belongs to board/omap3/common/power.c -> or
> even
> > > better to the board file itself?
> > >
> > > I was about to mention the opposite ;)
> > >
> > > Jean-Christophe asked to move the code from power.c to driver
> directory
> > >
> > > http://lists.denx.de/pipermail/u-boot/2009-May/052400.html
> > >
> > > If you follow above discussion, I was fine with power.c. If we get now
> > > a twl4030_i2c.c, we should merge the code from power.c into it, too
> > > (where ever it will be located and named, then).
> > >
> > This IMHO is the right approach -> but the real question is where in
> drivers/ directory? How about drivers/i2c/chips and moving the current
> drivers/i2c/* to drivers/i2c/busses - following the kernel organization?
> 
> I'd vote against creating a drivers/i2c/chips directory.  I believe this
> directory is deprecated in the Linux kernel and they'd prefer drivers be
> put in the proper driver/<subsystem> directory.  I'd vote to follow this
> convention in U-Boot too.
> 
> I'm not familiar with the device or what features you plan on supporting
> so I can't speak to whether it'd fit better in drivers/power,
> drivers/misc, somewhere omap3/board specific, etc.
> 
How about this:

Regarding Dirk's and Heiko's comment:
A) How about board/omap3/common/power.c to drivers/power/twl4030.c
On patch [PATCH 2/4] I2C Add initial support for TWL4030:
B) introduce a new header in include/twl4030.h from Tom's patch
Remove drivers/i2c/twl4030_i2c.c from the patch instead add:
#define TWLL4030_READ_U8(MODULE, VAL,REG)\
	i2c_read((MODULE), (REG), 1, (VAL), 1)
#define TWLL4030_WRITE_U8(MODULE, VAL,REG)\
	i2c_read((MODULE), (REG), 1, (VAL), 1)
to include/twl4030.h in the patch.

C) on  [PATCH 3/4] ZOOM2 Add power reset button
The change should go to corresponding board file -> for zoom1 or zoom2.

Regards,
Nishanth Menon