[U-Boot] [PATCH 1/2] pxa: add clock for system bus 2 arbiter

Daniel Mack daniel at caiaq.de
Tue Jun 23 17:30:04 CEST 2009


This clock is needed for systems using the USB2 device unit or the 2d
graphics accelerator.

Signed-off-by: Daniel Mack <daniel at caiaq.de>
---
 include/asm-arm/arch-pxa/pxa-regs.h |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 5a0885a..1f81e11 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -1952,6 +1952,7 @@ typedef void		(*ExcpHndlr) (void) ;
 #define CKENA_2_USBHOST	(1 << 2)	/* USB Host Unit Clock Enable */
 #define CKENA_1_LCD	(1 << 1)	/* LCD Unit Clock Enable */
 
+#define CKENB_9_SYSBUS2	(1 << 9)	/* System bus 2 */
 #define CKENB_8_1WIRE	((1 << 8) + 32) /* One Wire Interface Unit Clock Enable */
 #define CKENB_7_GPIO	((1 << 7) + 32)	/* GPIO Clock Enable */
 #define CKENB_6_IRQ	((1 << 6) + 32)	/* Interrupt Controller Clock Enable */
-- 
1.6.3.1



More information about the U-Boot mailing list