[U-Boot] [PATCH ... resent] Atmel LCD driver GUARDTIME fix

[Mark Jackson]

Mark Jackson wrote:
> This patch correctly sets up the guard time parameter in
> the Atmel LCDC driver.
> 
> This works on the AVR32 platform, but needs to be tested
> under the AT91 platform which shares the same code base.
> 
> Signed-off-by: Mark Jackson <mpfj at mimc.co.uk>
> ---
>   drivers/video/atmel_lcdfb.c |    5 +++--
>   1 files changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
> index 3a51cc7..14f578e 100644
> --- a/drivers/video/atmel_lcdfb.c
> +++ b/drivers/video/atmel_lcdfb.c
> @@ -42,6 +42,7 @@ short console_row;
>   /* configurable parameters */
>   #define ATMEL_LCDC_CVAL_DEFAULT		0xc8
>   #define ATMEL_LCDC_DMA_BURST_LEN	8
> +#define ATMEL_LCDC_GUARD_TIME		2

This should be ...

 >  #define ATMEL_LCDC_CVAL_DEFAULT		0xc8
 >  #define ATMEL_LCDC_DMA_BURST_LEN	8
 > +#define ATMEL_LCDC_GUARD_TIME		2

... without the extra space at the start.

> 
>   #if defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91CAP9)
>   #define ATMEL_LCDC_FIFO_SIZE		2048
> @@ -69,7 +70,7 @@ void lcd_ctrl_init(void *lcdbase)
> 
>   	/* Turn off the LCD controller and the DMA controller */
>   	lcdc_writel(panel_info.mmio, ATMEL_LCDC_PWRCON,
> -		    1 << ATMEL_LCDC_GUARDT_OFFSET);
> +		    ATMEL_LCDC_GUARD_TIME << ATMEL_LCDC_GUARDT_OFFSET);
> 
>   	/* Wait for the LCDC core to become idle */
>   	while (lcdc_readl(panel_info.mmio, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
> @@ -150,7 +151,7 @@ void lcd_ctrl_init(void *lcdbase)
> 
>   	lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMAEN);
>   	lcdc_writel(panel_info.mmio, ATMEL_LCDC_PWRCON,
> -		    (1 << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
> +		    (ATMEL_LCDC_GUARD_TIME << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
>   }
> 
>   ulong calc_fbsize(void)

My patch has been mangled ... there's an extra space at the start of each 
"unchanged" patch line.

Any ideas ?