[U-Boot] PULL into "next": u-boot-mpc5xxx.git#next
Wolfgang Denk
wd at denx.de
Fri Jun 5 14:33:56 CEST 2009
In message <20090605122633.10FC28246B12 at gemini.denx.de> you wrote:
>
> The following changes since commit 4867b82efe3e6c04b44a13daef0abb7891533d2a:
> Wolfgang Denk (1):
> General help message cleanup
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mpc5xxx.git next
>
> Stefan Roese (2):
> mpc512x: Fix PSC divisor calculation for baudrate setting
> mpc512x: Use serial_setbrg() in serial_init() to not duplicate the code
>
> Wolfgang Denk (10):
> mpc512x: change cpu/mpc512x/Makefile to use Kconfig style
> mpc512x: Move common files to share them by several boards
> cpu/mpc512x/pci.c: minor coding style cleanup
> cpu/mpc512x/diu.c: fix warning: assignment from incompatible pointer type
> Rename ads5121 board into mpc5121ads
> MPC512x: add more hardware description to immap_512x.h
> MPC512x: use I/O accessors instead of pointer accesses
> MPC512x FEC: get rid of duplicated struct ethernet_regs
> MPC512x: remove include/mpc512x.h
> MPC512x: add support for ARIA board
>
> MAINTAINERS | 2 +
> MAKEALL | 3 +-
> Makefile | 10 +-
> board/ads5121/ads5121.c | 432 -------------
> board/{ads5121 =3D> davedenx/aria}/Makefile | 9 +-
> board/davedenx/aria/aria.c | 316 +++++++++
> board/{ads5121 =3D> davedenx/aria}/config.mk | 2 +-
> board/{ads5121 =3D> freescale/mpc5121ads}/Makefile | 4 -
> board/{ads5121 =3D> freescale/mpc5121ads}/README | 0
> board/{ads5121 =3D> freescale/mpc5121ads}/config.mk | 0
> board/freescale/mpc5121ads/mpc5121ads.c | 339 ++++++++++
> common/cmd_ide.c | 4 -
> cpu/mpc512x/Makefile | 18 +-
> cpu/mpc512x/asm-offsets.h | 15 +
> cpu/mpc512x/config.mk | 6 +-
> cpu/mpc512x/cpu.c | 1 -
> cpu/mpc512x/cpu_init.c | 27 +-
> board/ads5121/ads5121_diu.c =3D> cpu/mpc512x/diu.c | 22 +-
> cpu/mpc512x/i2c.c | 57 +-
> cpu/mpc512x/ide.c | 128 ++++
> cpu/mpc512x/iopin.c | 10 +-
> {board/ads5121 =3D> cpu/mpc512x}/pci.c | 80 ++-
> cpu/mpc512x/serial.c | 92 ++--
> cpu/mpc512x/speed.c | 24 +-
> cpu/mpc512x/start.S | 6 +-
> {board/ads5121 =3D> cpu/mpc512x}/u-boot.lds | 0
> drivers/net/mpc512x_fec.c | 170 +++---
> drivers/net/mpc512x_fec.h | 155 +-----
> include/asm-ppc/immap_512x.h | 577 +++++++++++++++++-
> include/common.h | 3 +-
> include/configs/{ads5121.h =3D> aria.h} | 292 +++++-----
> include/configs/{ads5121.h =3D> mpc5121ads.h} | 30 +-
> include/mpc512x.h | 702 -----------------=
> ----
> 33 files changed, 1840 insertions(+), 1696 deletions(-)
> delete mode 100644 board/ads5121/ads5121.c
> copy board/{ads5121 =3D> davedenx/aria}/Makefile (80%)
> create mode 100644 board/davedenx/aria/aria.c
> copy board/{ads5121 =3D> davedenx/aria}/config.mk (94%)
> rename board/{ads5121 =3D> freescale/mpc5121ads}/Makefile (88%)
> rename board/{ads5121 =3D> freescale/mpc5121ads}/README (100%)
> rename board/{ads5121 =3D> freescale/mpc5121ads}/config.mk (100%)
> create mode 100644 board/freescale/mpc5121ads/mpc5121ads.c
> create mode 100644 cpu/mpc512x/asm-offsets.h
> rename board/ads5121/ads5121_diu.c =3D> cpu/mpc512x/diu.c (91%)
> create mode 100644 cpu/mpc512x/ide.c
> rename {board/ads5121 =3D> cpu/mpc512x}/pci.c (72%)
> rename {board/ads5121 =3D> cpu/mpc512x}/u-boot.lds (100%)
> copy include/configs/{ads5121.h =3D> aria.h} (63%)
> rename include/configs/{ads5121.h =3D> mpc5121ads.h} (96%)
> delete mode 100644 include/mpc512x.h
>
> This is based on and intended for the "next" branch.
Pulled into next.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"A fractal is by definition a set for which the Hausdorff Besicovitch
dimension strictly exceeds the topological dimension."
- Mandelbrot, _The Fractal Geometry of Nature_
More information about the U-Boot
mailing list