[U-Boot] [PATCH v3 3/6] ARM: Add macros.h to be used in assembler file.

[Wolfgang Denk]

Dear Magnus Lilja,

In message <bc809a4b4bb1a5d47ff874ac44f8777845366196.1244572159.git.lilja.magnus at gmail.com> you wrote:
> From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
> 
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
> ---
>  include/asm-arm/macro.h |   57 +++++++++++++++++++++++++++++++++++++++++++++++
>  1 files changed, 57 insertions(+), 0 deletions(-)
>  create mode 100644 include/asm-arm/macro.h

I'm missing documentation what these macros are supposed to be used
for?

Are they restricted to addresses in system RAM? Or intended to access
device registers? are they universal across all existing ARM systems,
i. e. are there not any configurations that might require any kind of
memory barriers or sync or considerations about caching?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"No proper program contains  an  indication  which  as  an  operator-
applied  occurrence  identifies an operator-defining occurrence which
as an indication-applied occurrence identifies an indication-defining
occurrence different from the one identified by the given  indication
as an indication-applied occurrence."               - ALGOL 68 Report