[U-Boot] [PATCH] OMAP3 pandora: update pin mux for rev3 boards

[Grazvydas Ignotas]

> when you will be in possession of the old version of a board and just because
> few people have the board is remove from the mainline you will not be happy.
> So no we will support the both

Well old boards *do* actually work after these changes, except one
game button and one analog controller (because of changed GPIOs). But
all old boards don't have the analog controllers soldered to them,
except one that I have (there were more but they were disassembled).
Game buttons can't be used with old boards anyway because they don't
fit into the case. So after considering these points I can say my "old
boards are no longer supported" statement is not really valid.

>> What I read is
>>
>> "no users ... ever got these boards"
>>
>> I would bet that you have some early (broken?) alpha boards not
>> being supported by U-Boot and never used because replaced by fixed
>> revisions, too.
> They will not have to be mainline until the hardware will be stablized

It's true, I sent initial patches before hardware was stabilized, but
I thought it would be no problem sending patches like this later,
after all hardware updates. Sorry if I was wrong.

So now I'm going to split this patch and resend, is that ok with you?