[U-Boot] [PATCH v4 3/3] Marvell Sheevaplug Board support

[Prafulla Wadaskar]

Hi Jean,

I observed that your arm/master is newly rebased, most of my patches are available here, where as Basic Kirkwood support is available on arm/next branch.

I have applied Basic Kirkwood patches from next to master branch and tried to build it there. At the end I get build error saying EABI version mismatch.
In this regard, may you please suggest me what additional patches I should pick from next branch to resolve this problem? (I saw certain work in this direction by you)

Or shall I continue working on arm/next?

Regards..
Prafulla . .
  

> -----Original Message-----
> From: u-boot-bounces at lists.denx.de 
> [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Prafulla Wadaskar
> Sent: Friday, June 19, 2009 3:03 PM
> To: Jean-Christophe PLAGNIOL-VILLARD; u-boot at lists.denx.de
> Cc: Manas Saksena; Ronen Shitrit; Nicolas Pitre; Ashish 
> Karkare; Prabhanjan Sarnaik; Lennert Buijtenhek
> Subject: Re: [U-Boot] [PATCH v4 3/3] Marvell Sheevaplug Board support
> 
> 
> > -----Original Message-----
> > From: Prafulla Wadaskar [mailto:prafulla at marvell.com]
> > Sent: Monday, June 08, 2009 5:35 PM
> > To: u-boot at lists.denx.de
> > Cc: Nicolas Pitre; Manas Saksena; Lennert Buijtenhek; Prabhanjan 
> > Sarnaik; Ronen Shitrit; Ashish Karkare; Prafulla Wadaskar
> > Subject: [PATCH v4 3/3] Marvell Sheevaplug Board support
> > 
> > Reference:
> > http://plugcomputer.org/
> > http://openplug.org/plugwiki/index.php/Das_U-boot_plug_support
> > 
> > This patch is tested for-
> > 1. Boot from DRAM/NAND flash
> > 2. File transfer using tftp
> > 3. NAND flash read/write/erase
> > 4. Linux kernel and RFS Boot from NAND
> > 
> > Signed-off-by: Prafulla Wadaskar <prafulla at marvell.com>
> > ---
> > Change log:
> > v2: updated as per feedback for v1
> > 
> > v3: updated as per feedback for v2
> > 
> > v4: removed PHY driver dependency, coded in sheevaplug.c
> 
> Hi Jean,
> 
> Network driver dependency (2/3) in this patch series is 
> accepted by Ben Anther dependency (1/3), the nand driver is 
> all done, waiting for reply from scott.
> Since this is arm board- who will be custodian to accept this 
> patch? are you? :-)
> 
> Regards..
> Prafulla . . 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>