[U-Boot] BDIxxxx and others...

[Leon Woestenberg]

Hello,

On Wed, Jun 17, 2009 at 1:24 AM, David Hawkins<dwh at ovro.caltech.edu> wrote:
>
> I've wired up the COP connection on my board via an FPGA,
> so that I could conceivably use the PowerPC JTAG via
> PCI. However, its the lack of open documentation on the
> JTAG commands that has limited my interest in pursuing
> this. However, it would be simple to use that interface
> to log all JTAG transactions, to figure out all the
> JTAG TAP instructions.
>
There has been shown interest on the OpenOCD mailing list (last week
or so) to reverse engineer the PowerPC COP JTAG commands, so that
OpenOCD could support PowerPC architectures as well.

Regards,
-- 
Leon