[U-Boot] Boot from USB support for Kirkwood SOC

xiangfu xiangfu.z at gmail.com
Thu Jun 11 10:10:27 CEST 2009


Hi
Wolfgang Denk wrote:
> Dear xiangfu,
> 
> In message <4A30B020.7080109 at gmail.com> you wrote:
>> here is part of JZ4740 cpu data sheet [1]
>> --
>> 3.7.3   BOOT
>> Jz4740 support 3 different boot sources depending on BOOT_SEL0 and BOOT_SEL1 pin values.
>> Table 3-29 lists them.
>>                              Table 3-29 Boot from 3 boot sources
>>
>> BOOT_SEL1 BOOT_SEL0                Boot Source
>>     0         0     Boot from NOR flash at CS4
>>     0         1     Boot from USB device
>>     1         0     Boot from 512 page NAND flash at CS1
>>     1         1     Boot from 2k page NAND flash at CS1
> 
> cool. "3 different boot sources" - one, two, three, four ;-)

:-) I don't notice that.
I think the guy who write this document think that 
"512 page NAND" and "2k page NAND" are "NAND"   ;-)


-- 
Best Regards
Xiangfu Liu

jabber : xiangfu.z at gmail.com
skype  : xiangfu.z


More information about the U-Boot mailing list