[U-Boot] [PATCH 1/4] MPC512x: enabling NAND support requires CONFIG_SYS_64BIT_VSPRINTF

[Wolfgang Denk]

When enabling NAND support for a board, one must also define
CONFIG_SYS_64BIT_VSPRINTF because this is needed in nand_util.c
for correct output.

Signed-off-by: Wolfgang Denk <wd at denx.de>
Cc: Stefan Roese <sr at denx.de>
Cc: Reinhard Arlt <reinhard.arlt at esd-electronics.com>
---
Hello Mr. Arlt - with Stefan on vacation could you please be so kind
and test this on your mecp5123 board?  Thanks.  -- wd

 include/configs/mecp5123.h   |    2 ++
 include/configs/mpc5121ads.h |    2 ++
 2 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h
index 0831843..ed3e70f 100644
--- a/include/configs/mecp5123.h
+++ b/include/configs/mecp5123.h
@@ -187,6 +187,8 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 #define NAND_MAX_CHIPS                  CONFIG_SYS_MAX_NAND_DEVICE
 
+#define	CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
+
 /*
  * Configuration parameters for MPC5121 NAND driver
  */
diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index 45a004e..852d7b1 100644
--- a/include/configs/mpc5121ads.h
+++ b/include/configs/mpc5121ads.h
@@ -211,6 +211,8 @@
 #define NAND_MAX_CHIPS                  CONFIG_SYS_MAX_NAND_DEVICE
 #define CONFIG_SYS_NAND_SELECT_DEVICE	/* driver supports mutipl. chips */
 
+#define	CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
+
 /*
  * Configuration parameters for MPC5121 NAND driver
  */
-- 
1.6.0.6