[U-Boot] [PATCH] 8xxx: Fix PCI bus address setup for 36-bit configs

Kumar Gala galak at kernel.crashing.org
Tue Jun 30 15:25:20 CEST 2009


We want the outbound PCI memory map to end at the 4G boundary so we
can maximize the amount of space available for inbound mappings if
we have large amounts of memory.

This matches the device tree setup in the kernel for the 36-bit physical
configs for the platforms that have one (MPC8641 HPCN & MPC8572 DS).

Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
---
 include/configs/MPC8572DS.h   |    6 +++---
 include/configs/MPC8641HPCN.h |    2 +-
 include/configs/P2020DS.h     |    6 +++---
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 2aba689..6f1b1a4 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -404,7 +404,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /* controller 3, direct to uli, tgtid 3, Base address 8000 */
 #define CONFIG_SYS_PCIE3_MEM_VIRT	0x80000000
 #ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE3_MEM_BUS	0xc0000000
+#define CONFIG_SYS_PCIE3_MEM_BUS	0xe0000000
 #define CONFIG_SYS_PCIE3_MEM_PHYS	0xc00000000ull
 #else
 #define CONFIG_SYS_PCIE3_MEM_BUS	0x80000000
@@ -423,7 +423,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
 #define CONFIG_SYS_PCIE2_MEM_VIRT	0xa0000000
 #ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE2_MEM_BUS	0xc0000000
+#define CONFIG_SYS_PCIE2_MEM_BUS	0xe0000000
 #define CONFIG_SYS_PCIE2_MEM_PHYS	0xc20000000ull
 #else
 #define CONFIG_SYS_PCIE2_MEM_BUS	0xa0000000
@@ -442,7 +442,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /* controller 1, Slot 1, tgtid 1, Base address a000 */
 #define CONFIG_SYS_PCIE1_MEM_VIRT	0xc0000000
 #ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE1_MEM_BUS	0xc0000000
+#define CONFIG_SYS_PCIE1_MEM_BUS	0xe0000000
 #define CONFIG_SYS_PCIE1_MEM_PHYS	0xc40000000ull
 #else
 #define CONFIG_SYS_PCIE1_MEM_BUS	0xc0000000
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index d8042fb..035874b 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -335,7 +335,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_SYS_PCI1_MEM_VIRT	0x80000000
 #ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCI1_MEM_BUS		0xc0000000
+#define CONFIG_SYS_PCI1_MEM_BUS		0xe0000000
 #define CONFIG_SYS_PCI1_MEM_PHYS	0x0000000c00000000ULL
 #else
 #define CONFIG_SYS_PCI1_MEM_BUS		CONFIG_SYS_PCI1_MEM_VIRT
diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index a39ff26..84b5686 100644
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -437,7 +437,7 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy);
 /* controller 3, Slot 1, tgtid 3, Base address b000 */
 #define CONFIG_SYS_PCIE3_MEM_VIRT	0x80000000
 #ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE3_MEM_BUS	0xc0000000
+#define CONFIG_SYS_PCIE3_MEM_BUS	0xe0000000
 #define CONFIG_SYS_PCIE3_MEM_PHYS	0xc00000000ull
 #else
 #define CONFIG_SYS_PCIE3_MEM_BUS	0x80000000
@@ -456,7 +456,7 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy);
 /* controller 2, direct to uli, tgtid 2, Base address 9000 */
 #define CONFIG_SYS_PCIE2_MEM_VIRT	0xa0000000
 #ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE2_MEM_BUS	0xc0000000
+#define CONFIG_SYS_PCIE2_MEM_BUS	0xe0000000
 #define CONFIG_SYS_PCIE2_MEM_PHYS	0xc20000000ull
 #else
 #define CONFIG_SYS_PCIE2_MEM_BUS	0xa0000000
@@ -475,7 +475,7 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy);
 /* controller 1, Slot 2, tgtid 1, Base address a000 */
 #define CONFIG_SYS_PCIE1_MEM_VIRT	0xc0000000
 #ifdef CONFIG_PHYS_64BIT
-#define CONFIG_SYS_PCIE1_MEM_BUS	0xc0000000
+#define CONFIG_SYS_PCIE1_MEM_BUS	0xe0000000
 #define CONFIG_SYS_PCIE1_MEM_PHYS	0xc40000000ull
 #else
 #define CONFIG_SYS_PCIE1_MEM_BUS	0xc0000000
-- 
1.6.0.6



More information about the U-Boot mailing list