[U-Boot] [PATCH 3/4] ZOOM2 Add power reset button

[Menon, Nishanth]

> -----Original Message-----
> From: Heiko Schocher [mailto:hs at denx.de]
> Sent: Wednesday, June 10, 2009 1:22 PM
> >
> > Regarding Dirk's and Heiko's comment:
> > A) How about board/omap3/common/power.c to drivers/power/twl4030.c
> 
> I don;t know, if this "board/omap3/common/power.c" is identical
> with twl4030 ... ?
The objective of power.c was to have only to have power related code for all omap3 platforms -> but currently there is only power_init_r function which is twl4030 compatible chips -> hence makes sense to break it out.

> 
> > On patch C:
> > B) introduce a new header in include/twl4030.h from Tom's patch
> > Remove drivers/i2c/twl4030_i2c.c from the patch instead add:
> > #define TWLL4030_READ_U8(MODULE, VAL,REG)\
> > 	i2c_read((MODULE), (REG), 1, (VAL), 1)
> > #define TWLL4030_WRITE_U8(MODULE, VAL,REG)\
> > 	i2c_read((MODULE), (REG), 1, (VAL), 1)
> > to include/twl4030.h in the patch.
> 
> Maybe an option ... thats why I think it is no i2c driver ...
> 
> > C) on  [PATCH 3/4] ZOOM2 Add power reset button
> > The change should go to corresponding board file -> for zoom1 or zoom2.
> 
> or in "drivers/power/twl4030.c", if it is for all zoom* boards identical.
> 
Yes - it can belong there I agree.

Regards,
Nishanth Menon