[U-Boot] PCI-E problems on Kilauea board

[Stefan Roese]

On Monday 02 March 2009, Felix Radensky wrote:
> > Also, I've compared the values of SDR0_SDSTP0-SDR0_SDSTP3 registers in
> > bootstrap options C and H
> > and didn't find anything suspicious. There are differences in various
> > divisor values, but that is expected.
> > Tested with u-boot 2009.03-rc1 and linux-2.6.29-rc5
>
> It is even more simple. It's enough to power up the board and run
> "reset" in u-boot,
> to make u-boot recognize the card when it comes up.

Did you already try setting the "pciscandelay" env variable? Set it to 5 for 5 
seconds delay before PnP scanning.

Does this help?

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================