March 2009 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sun Mar 1 15:20:44 CET 2009
Ending: Tue Mar 31 23:55:34 CEST 2009
Messages: 1430

• [U-Boot] RAM Probing for ads5121rev4   Michele De Candia (VT)
• [U-Boot] RAM Probing for ads5121rev4   Michele De Candia (VT)
• [U-Boot] Dear Winner   Legal Agent
• [U-Boot] AT91: NAND OOB and ECC in U-Boot vs Linux   Jesus Alvarez
• [U-Boot] AT91: NAND OOB and ECC in U-Boot vs Linux   Jesus Alvarez
• [U-Boot] [PATCH] Small fix to m5282evb   Alan Carvalho de Assis
• [U-Boot] YOU ARE A WINNER   LOTTERY BOARD
• [U-Boot] Toradex Colibri PXA-320   Alon Bar-Lev
• [U-Boot] FSL DDR @ 83xx   Jerry Van Baren
• [U-Boot] Uboot and DMA   Jerry Van Baren
• [U-Boot] How to Remove the padding bits from u-boot.bin   Jerry Van Baren
• [U-Boot] Multiple device support - none at all?   Jerry Van Baren
• [U-Boot] [PATCH] Add bank configuration to FSL spd_sdram.c   Jerry Van Baren
• [U-Boot] [PATCH] Add bank configuration to FSL spd_sdram.c   Jerry Van Baren
• [U-Boot] [PATCH v2] Add bank configuration to FSL spd_sdram.c   Jerry Van Baren
• [U-Boot] LXT972 issue on MPC8247: tx error   Jerry Van Baren
• [U-Boot] Mirror to github   Jerry Van Baren
• [U-Boot] Building u-boot on a PowerPC host   Jerry Van Baren
• [U-Boot] Cleaning up new port   Jerry Van Baren
• [U-Boot] [PATCH] 8313erdb: Set guarded bit on BAT that covers the end of the address space.   Jerry Van Baren
• [U-Boot] CONFIG_SERVERIP   Jerry Van Baren
• [U-Boot] minicom garbled   Jerry Van Baren
• [U-Boot] Size of external u-boot commands   Jerry Van Baren
• [U-Boot] Size of external u-boot commands   Jerry Van Baren
• [U-Boot] [PATCH v2 4/7] rtc: add support for 4543 RTC (manufactured by e.g. EPSON)   Jerry Van Baren
• [U-Boot] [PATCH 5/7 v2] OMAP3: Add serial number based on die ID   Dirk Behme
• [U-Boot] [PATCH 6/7 v2] OMAP3: Add OMAP3 core changes for MUSB   Dirk Behme
• [U-Boot] [PATCH 1/1] Fix for running examples on OMAP3 EVM board   Dirk Behme
• [U-Boot] [PATCH v3] OMAP3: Add serial number based on die ID   Dirk Behme
• [U-Boot] Timer on OMAP3430SDP.   Dirk Behme
• [U-Boot] [PATCH 1/1] Changes for fixing the timer to 1 msec and   Dirk Behme
• [U-Boot] [PATCH v3] OMAP3: Add serial number based on die ID   Dirk Behme
• [U-Boot] [PATCH 6/7 v2] OMAP3: Add OMAP3 core changes for MUSB   Dirk Behme
• [U-Boot] [PATCH 1/1] Changes for fixing the timer to 1 msec and   Dirk Behme
• [U-Boot] [PATCH v4] OMAP3: Add support for OMAP3 die ID   Dirk Behme
• [U-Boot] [PATCH 1/1] The GP timer is fixed for 1msec and CONFIG_SYS_HZ to 1000.   Dirk Behme
• [U-Boot] [PATCH] OMAP3: Update Overo pin mux for new expansion board   Dirk Behme
• [U-Boot] [PATCH] OMAP3: Fix timer handling to 1ms and CONFIG_SYS_HZ to 1000.   Dirk Behme
• [U-Boot] [PATCH] omap3: mmc: mmc2 support   Dirk Behme
• [U-Boot] omap3: write to mmc   Dirk Behme
• [U-Boot] ARM Pull Request   Dirk Behme
• [U-Boot] [PATCH 13/13] ompa3: remove duplicate interrupts code   Dirk Behme
• [U-Boot] core ticks/timer code   Dirk Behme
• [U-Boot] [PATCH] cmd_mmc: add support device command for selecting mmc device   Dirk Behme
• [U-Boot] [PATCH 13/13] ompa3: remove duplicate interrupts code   Dirk Behme
• [U-Boot] [PATCH] OMAP3: Update Overo pin mux for new expansion board   Dirk Behme
• [U-Boot] ARM Pull Request   Dirk Behme
• [U-Boot] [PATCH 13/19] omap3: remove duplicate interrupts code   Dirk Behme
• [U-Boot] [PATCH v2] OMAP3: Update Overo pin mux for new expansion board   Dirk Behme
• [U-Boot] ARM Pull Request   Dirk Behme
• [U-Boot] ARM Pull Request   Dirk Behme
• [U-Boot] core ticks/timer code   Dirk Behme
• [U-Boot] [PATCH v6] Add support for the digsy MTC board.   Grzegorz Bernacki
• [U-Boot] [PATCH v7 0/2] Add support for the digsy MTC board.   Grzegorz Bernacki
• [U-Boot] [PATCH v7 1/2] mpc52xx: Get rid of board-specific #ifdef's in cpu/mpc5xxx/ide.c   Grzegorz Bernacki
• [U-Boot] [PATCH v7 2/2] Add support for the digsy MTC board.   Grzegorz Bernacki
• [U-Boot] [PATCH v6] Add support for the digsy MTC board.   Grzegorz Bernacki
• [U-Boot] [PATCH v6] Add support for the digsy MTC board.   Grzegorz Bernacki
• [U-Boot] [PATCH v8 0/2] Add support for the digsy MTC board.   Grzegorz Bernacki
• [U-Boot] [PATCH v8 1/2] mpc52xx: Get rid of board-specific #ifdef's in cpu/mpc5xxx/ide.c   Grzegorz Bernacki
• [U-Boot] [PATCH v7 2/2] Add support for the digsy MTC board.   Grzegorz Bernacki
• [U-Boot] [PATCH] digsy_mtc: Fix compile warnings.   Grzegorz Bernacki
• [U-Boot] [PATCH v7 2/2] Add support for the digsy MTC board.   Grzegorz Bernacki
• [U-Boot] [PATCH 2/3 v3] UBIFS: Implement read-only UBIFS support in U-Boot   Artem Bityutskiy
• [U-Boot] [PATCH 2/3 v3] UBIFS: Implement read-only UBIFS support in U-Boot   Artem Bityutskiy
• [U-Boot] [PATCH v2] Support for PXA27X UDC.   Remy Bohmer
• [U-Boot] [PATCH v2] Support for PXA27X UDC.   Remy Bohmer
• [U-Boot] tftp download with USB vitrual ethnet driver   Remy Bohmer
• [U-Boot] At91 mass storage device   Remy Bohmer
• [U-Boot] At91 mass storage device   Remy Bohmer
• [U-Boot] At91 mass storage device   Remy Bohmer
• [U-Boot] At91 mass storage device   Remy Bohmer
• [U-Boot] Pull request: u-boot-usb   Remy Bohmer
• [U-Boot] [PATCH 09/13] s3c64xx: move usb driver to drivers/usb   Remy Bohmer
• [U-Boot] [PATCH 10/13] at91: move usb driver to drivers/usb   Remy Bohmer
• [U-Boot] [PATCH 10/13] at91: move usb driver to drivers/usb   Remy Bohmer
• [U-Boot] [PATCH] 83xx: correctly set encryption and I2C bus 0 clock   Norbert van Bolhuis
• [PATCH] 83xx: correctly set encryption and I2C bus 0 clock   Norbert van Bolhuis
• [U-Boot] [PATCH] 83xx: correctly set encryption and I2C bus 0 clock   Norbert van Bolhuis
• [U-Boot] [PATCH] 83xx: correctly set encryption and I2C bus 0 clock   Norbert van Bolhuis
• [U-Boot] [PATCH] 8313erdb: Set guarded bit on BAT that covers the end of the address space.   Norbert van Bolhuis
• [U-Boot] u-boot fails to uncompress a "gzip'ed -9" kernel   Norbert van Bolhuis
• [U-Boot] YOUR PARTNERSHIP NEEDED‏   Dr Moore Collins
• [U-Boot] D.entists Database in America   Lora T Connelly
• [U-Boot] MPC8572E I2C bus speed after emulator reset   Scott Coulter
• [U-Boot] MPC8572E I2C bus speed after emulator reset   Scott Coulter
• [U-Boot] exit(-1) function in U-Boot   Drasko DRASKOVIC
• [U-Boot] exit(-1) function in U-Boot   Drasko DRASKOVIC
• [U-Boot] exit(-1) function in U-Boot   Drasko DRASKOVIC
• [U-Boot] exit(-1) function in U-Boot   Drasko DRASKOVIC
• [U-Boot] Enabling ARM DCache (and MMU setup) in U-Boot   Drasko DRASKOVIC
• [U-Boot] Enabling ARM DCache (and MMU setup) in U-Boot   Drasko DRASKOVIC
• [U-Boot] Enabling ARM DCache (and MMU setup) in U-Boot   Drasko DRASKOVIC
• [U-Boot] Enabling ARM DCache (and MMU setup) in U-Boot   Drasko DRASKOVIC
• [U-Boot] Enabling ARM DCache (and MMU setup) in U-Boot   Drasko DRASKOVIC
• [U-Boot] Problems with ext2ls & SD   DVM
• [U-Boot] Problems with ext2ls & SD   DVM
• [U-Boot] [PATCH] 83xx: Fix some bugs in spd sdram code   Liu Dave-R63238
• [U-Boot] [PATCH] PowerPC MPC85xx: don't hang on read exception   Liu Dave-R63238
• [U-Boot] [PATCH] PowerPC MPC85xx: don't hang on read exception   Liu Dave-R63238
• [U-Boot] [PATCH] Add bank configuration to FSL spd_sdram.c   Liu Dave-R63238
• [U-Boot] [PATCH v2] Add bank configuration to FSL spd_sdram.c   Liu Dave-R63238
• [U-Boot] [PATCH] PowerPC MPC85xx: don't hang on read exception   Liu Dave-R63238
• [U-Boot] [PATCH] 8313erdb: Set guarded bit on BAT that covers the end of the address space.   Liu Dave-R63238
• [U-Boot] Maillist issue of u-boot at lists.denx.de   Liu Dave-R63238
• [U-Boot] Board Reset issue   Liu Dave-R63238
• [U-Boot] Is the TI AR7 architecture supported?   Rogan Dawes
• [U-Boot] Ease of porting Linux drivers/features to U-Boot?   Rogan Dawes
• [U-Boot] [PATCH 5/7 v2] OMAP3: Add serial number based on die ID   Wolfgang Denk
• [U-Boot] [PATCH 6/7 v2] OMAP3: Add OMAP3 core changes for MUSB   Wolfgang Denk
• [U-Boot] POST questions   Wolfgang Denk
• [U-Boot] [PATCH] Add the "mfill" and "mcheck" memory commands.   Wolfgang Denk
• [U-Boot] U-Boot Scripting suggestions to decrement, counter in EEPROM.   Wolfgang Denk
• [U-Boot] [PATCH] CONFIG_PRINT_TIME: Measuring boot time.   Wolfgang Denk
• [U-Boot] Creating partitions on NAND flash   Wolfgang Denk
• [U-Boot] [PATCH] Seperate mtdpart command from jffs2   Wolfgang Denk
• [U-Boot] [PATCH] Add the "mfill" and "mcheck" memory commands.   Wolfgang Denk
• [U-Boot] [PATCH 1/1] Changes for single binary image for u-boot for NAND/OneNAND flash.   Wolfgang Denk
• [U-Boot] [PATCH 1/1] example: introduce EXAMPLE_LOAD_ADDR   Wolfgang Denk
• [U-Boot] [PATCH] Fix OneNAND ipl to read 256KB   Wolfgang Denk
• [U-Boot] [PATCH] ppc: Increase precision of ticks2usec   Wolfgang Denk
• [U-Boot] [PATCH v3] OMAP3: Add serial number based on die ID   Wolfgang Denk
• [U-Boot] [PATCH 03/15] tools/Makefile: Build bmp_logo only when LCD or VIDEO logos are enabled   Wolfgang Denk
• [U-Boot] Pull request: u-boot-i2c   Wolfgang Denk
• [U-Boot] [PATCH 2/2] at91sam9263ek: active watchdog support via at91sam9263ek_wdt_config   Wolfgang Denk
• [U-Boot] [PATCH 1/2] at91sam9: add watchdog support   Wolfgang Denk
• [U-Boot] [PATCH 2/2] at91sam9263ek: active watchdog support via at91sam9263ek_wdt_config   Wolfgang Denk
• [U-Boot] [PATCH 1/9] at91sam9/cap9: use define instead hardcoded value for the USB_OHCI_REGS_BASE   Wolfgang Denk
• [U-Boot] [PATCH 5/9] Add support for the AT91RM9200EK Board.   Wolfgang Denk
• [U-Boot] [PATCH 9/9] at91rm9200ek: add dcc support with at91rm9200ek_dcc_config   Wolfgang Denk
• [U-Boot] [PATCH 7/9] at91rm9200: fix DCC support   Wolfgang Denk
• [U-Boot] [PATCH 8/9] at91sam9263ek add dcc support with at91sam9263ek_dcc_config   Wolfgang Denk
• [U-Boot] AT91 Pull Request   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc83xx.git   Wolfgang Denk
• [U-Boot] [PATCH 1/2] at91sam9: add watchdog support   Wolfgang Denk
• [U-Boot] [PATCH 8/9] at91sam9263ek add dcc support with at91sam9263ek_dcc_config   Wolfgang Denk
• [U-Boot] [PATCH 7/9] at91rm9200: fix DCC support   Wolfgang Denk
• [U-Boot] [PATCH 5/9] Add support for the AT91RM9200EK Board.   Wolfgang Denk
• [U-Boot] [PATCH 2/2] at91sam9263ek: active watchdog support via at91sam9263ek_wdt_config   Wolfgang Denk
• [U-Boot] [PATCH] Seperate mtdpart command from jffs2   Wolfgang Denk
• [U-Boot] [PATCH] Seperate mtdpart command from jffs2   Wolfgang Denk
• [U-Boot] [PATCH 7/9] at91rm9200: fix DCC support   Wolfgang Denk
• [U-Boot] [PATCH] Fix OneNAND ipl to read 256KB   Wolfgang Denk
• [U-Boot] Display Sub SYstem Controller Initialization   Wolfgang Denk
• [U-Boot] [PATCH 7/9] at91rm9200: fix DCC support   Wolfgang Denk
• [U-Boot] [PATCH] at91: Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.   Wolfgang Denk
• [U-Boot] [PATCH 7/9] at91rm9200: fix DCC support   Wolfgang Denk
• [U-Boot] [PATCH] Seperate mtdpart command from jffs2   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc83xx.git   Wolfgang Denk
• [U-Boot] U-boot debugger/emulator   Wolfgang Denk
• [U-Boot] how to create a uboot for my board   Wolfgang Denk
• [U-Boot] U-boot debugger/emulator   Wolfgang Denk
• [U-Boot] Question about U-Boot porting based on ppc architecture   Wolfgang Denk
• [U-Boot] [PATCH 1/1] Changes for fixing the timer to 1 msec and   Wolfgang Denk
• [U-Boot] [PATCH v3] OMAP3: Add serial number based on die ID   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc83xx   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] [PATCH 0/3] powerpc: common updates for keymile boards   Wolfgang Denk
• [U-Boot] [PATCH 3/3] 8xx: add support for new keymile kmsupx4 board.   Wolfgang Denk
• [U-Boot] [PATCH 2/3] 8xx, mgsuvd: rename board to a more generic name   Wolfgang Denk
• [U-Boot] Is it possible let linux kernel use CONFIG_CMDLINE instead of u-boot passed ?   Wolfgang Denk
• [U-Boot] U-boot debugger/emulator   Wolfgang Denk
• [U-Boot] U-boot debugger/emulator   Wolfgang Denk
• [U-Boot] [PATCH 0/3] powerpc: common updates for keymile boards   Wolfgang Denk
• [U-Boot] [PATCH 6/7 v2] OMAP3: Add OMAP3 core changes for MUSB   Wolfgang Denk
• [U-Boot] [PATCH] 83xx: correctly set encryption and I2C bus 0 clock   Wolfgang Denk
• [U-Boot] [PATCH v6] Add support for the digsy MTC board.   Wolfgang Denk
• [U-Boot] Problem booting Linux   Wolfgang Denk
• [U-Boot] Problem booting Linux   Wolfgang Denk
• [U-Boot] [PATCH v6] Add support for the digsy MTC board.   Wolfgang Denk
• [U-Boot] Multiple device support - none at all?   Wolfgang Denk
• [U-Boot] [PATCH 01/26 v2] Makefile: Make autoconf.mk a dependency of the depend target   Wolfgang Denk
• [U-Boot] Multiple device support - none at all?   Wolfgang Denk
• [U-Boot] [PATCH v2] at91: change CONFIG_SYS_HZ to 1000   Wolfgang Denk
• [U-Boot] [PATCH 01/26 v2] Makefile: Make autoconf.mk a dependency of the depend target   Wolfgang Denk
• [U-Boot] [PATCH 17/26 v2] tools/Makefile: Give precedence to U-Boot's include directory   Wolfgang Denk
• [U-Boot] [PATCH] MPC5200 FEC MII speed register   Wolfgang Denk
• [U-Boot] [PATCH v6] Add support for the digsy MTC board.   Wolfgang Denk
• [U-Boot] exit(-1) function in U-Boot   Wolfgang Denk
• [U-Boot] [PATCH V2] example/standalone: introduce STANDALONE_LOAD_ADDR   Wolfgang Denk
• [U-Boot] [PATCH V2] example/standalone: introduce STANDALONE_LOAD_ADDR   Wolfgang Denk
• [U-Boot] [GIT PULL] Please pull mpc5xxx tree   Wolfgang Denk
• [U-Boot] PXA Pull request   Wolfgang Denk
• [U-Boot] ARM Pull Request   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc83xx.git   Wolfgang Denk
• [U-Boot] Pull request: u-boot-sh   Wolfgang Denk
• [U-Boot] [PATCH V2] example/standalone: introduce STANDALONE_LOAD_ADDR   Wolfgang Denk
• [U-Boot] [PATCH 5/7] Make a special uboot used for booting from SDcard or SPI flash   Wolfgang Denk
• [U-Boot] [PATCH 7/7] Save the env variables to SDcard and SPI flash for MPC8536DS   Wolfgang Denk
• [U-Boot] [PATCH] Make nboot skip bad blocks   Wolfgang Denk
• [U-Boot] how do you build u-boot under Windows XP SP2   Wolfgang Denk
• [U-Boot] CUSTODIANS: Urgent boarding call for flight 2009.03   Wolfgang Denk
• [U-Boot] Mirror to github   Wolfgang Denk
• [U-Boot] [PATCH 1/1] The GP timer is fixed for 1msec and CONFIG_SYS_HZ to 1000.   Wolfgang Denk
• [U-Boot] exit(-1) function in U-Boot   Wolfgang Denk
• [U-Boot] Cleaning up new port   Wolfgang Denk
• [U-Boot] [PATCH 5/7] Make a special uboot used for booting from SDcard or SPI flash   Wolfgang Denk
• [U-Boot] exit(-1) function in U-Boot   Wolfgang Denk
• [U-Boot] Cleaning up new port   Wolfgang Denk
• [U-Boot] exit(-1) function in U-Boot   Wolfgang Denk
• [U-Boot] Please pull u-boot-ppc4xx   Wolfgang Denk
• [U-Boot] Pull request: nand flash   Wolfgang Denk
• [U-Boot] [GIT PULL] Please pull coldfire tree   Wolfgang Denk
• [U-Boot] MPC8315ERDB   Wolfgang Denk
• [U-Boot] Error: No NAND device found during Reset   Wolfgang Denk
• [U-Boot] Error: No NAND device found during Reset   Wolfgang Denk
• [U-Boot] [PATCH 1/1] LPC2468 support   Wolfgang Denk
• [U-Boot] [PATCH 1/2] LPC2468 support   Wolfgang Denk
• [U-Boot] [PATCH 17/26 v2] tools/Makefile: Give precedence to U-Boot's include directory   Wolfgang Denk
• [U-Boot] [PATCH 5/7] Make a special uboot used for booting from SDcard or SPI flash   Wolfgang Denk
• [U-Boot] [PATCH 1/5] NetStar: config reindentation   Wolfgang Denk
• [U-Boot] [PATCH 3/5] NetStar: use generic flash driver   Wolfgang Denk
• [U-Boot] [PATCH 1/6 v2] 82xx, mgcoge: fix environment sector size   Wolfgang Denk
• [U-Boot] [PATCH 2/6 v2] 8xx, icache: enabling ICache not before running from RAM   Wolfgang Denk
• [U-Boot] [PATCH 3/6 v2] powerpc: common updates for keymile boards   Wolfgang Denk
• [U-Boot] [PATCH 4/6 v2] 8xx, mgsuvd: Coding Style cleanup config file   Wolfgang Denk
• [U-Boot] [PATCH 5/6 v2] 8xx, mgsuvd: rename board to a more generic name   Wolfgang Denk
• [U-Boot] [PATCH 6/6 v2] 8xx: add support for new keymile kmsupx4 board.   Wolfgang Denk
• [U-Boot] CUSTODIANS: Urgent boarding call for flight 2009.03   Wolfgang Denk
• [U-Boot] [PATCH v8 1/2] mpc52xx: Get rid of board-specific #ifdef's in cpu/mpc5xxx/ide.c   Wolfgang Denk
• [U-Boot] [PATCH v7 2/2] Add support for the digsy MTC board.   Wolfgang Denk
• [U-Boot] [PATCH] smc911x_eeprom: update register API   Wolfgang Denk
• [U-Boot] [PATCH 1/8 v2] UBIFS: Implement read-only UBIFS support in U-Boot (Part 1)   Wolfgang Denk
• [U-Boot] [PATCH 5/7] Make a special uboot used for booting from SDcard or SPI flash   Wolfgang Denk
• [U-Boot] [PATCH 5/7] Make a special uboot used for booting from SDcard or SPI flash   Wolfgang Denk
• [U-Boot] [PATCH 5/7] Make a special uboot used for booting from SDcard or SPI flash   Wolfgang Denk
• [U-Boot] [PATCH v7 2/2] Add support for the digsy MTC board.   Wolfgang Denk
• [U-Boot] How !, Adding a New Device to U-Boot.   Wolfgang Denk
• [U-Boot] How !, Adding a New Device to U-Boot.   Wolfgang Denk
• [U-Boot] [PATCH v2] Separate mtdparts command from jffs2   Wolfgang Denk
• [U-Boot] [PATCH v2] Separate mtdparts command from jffs2   Wolfgang Denk
• [U-Boot] [PATCH] Coldire: mcf52x2: Improve gcc version detection   Wolfgang Denk
• [U-Boot] [PATCH 1/2] LPC2468 support   Wolfgang Denk
• [U-Boot] MIPS build status (Re: CUSTODIANS: Urgent boarding call for flight 2009.03)   Wolfgang Denk
• [U-Boot] Please pull u-boot-cfi-flash   Wolfgang Denk
• [U-Boot] U-Boot default parameters   Wolfgang Denk
• [U-Boot] SH Build status (Re: CUSTODIANS: Urgent boarding call for flight 2009.03)   Wolfgang Denk
• [U-Boot] [PATCH] Coldire: mcf52x2: Improve gcc version detection   Wolfgang Denk
• [U-Boot] Please pull u-boot-ppc4xx   Wolfgang Denk
• [U-Boot] [PATCH] digsy_mtc: Fix compile warnings.   Wolfgang Denk
• [U-Boot] [PATCH v2] powerpc: Only use eth_getenv_enetaddr() if networking is enabled   Wolfgang Denk
• [U-Boot] [PATCH v4] Separate mtdparts command from jffs2   Wolfgang Denk
• [U-Boot] [PATCH 0/3 v3] UBIFS Support for U-Boot   Wolfgang Denk
• [U-Boot] [PATCH v2] UBIFS: Missing offset relocation for compressor 'none'   Wolfgang Denk
• [U-Boot] [PATCH to 2008.03] net: sh_eth: Remove sh_eth_reset() from halt function   Wolfgang Denk
• [U-Boot] [PATCH to 2008.03] net: sh_eth: Remove sh_eth_reset() from halt function   Wolfgang Denk
• [U-Boot] [PATCH] .gitignore for generated files in api_examples directory   Wolfgang Denk
• [U-Boot] Pull request: u-boot-usb   Wolfgang Denk
• [U-Boot] [PATCH 1/3] mpc5200: do not use printf in i2c_init()   Wolfgang Denk
• [U-Boot] [PATCH 3/3] mpc5200: make i2c faster   Wolfgang Denk
• [U-Boot] [PATCH] Make flash protection work, when the environment is in EEPROM   Wolfgang Denk
• [U-Boot] [PATCH] Make flash protection work, when the environment is in EEPROM   Wolfgang Denk
• [U-Boot] [PATCH] board support patch for phyCORE-MPC5200B-tiny   Wolfgang Denk
• [U-Boot] [PATCH 1/3] mpc5200: do not use printf in i2c_init()   Wolfgang Denk
• [U-Boot] [PATCH 1/3] mpc5200: do not use printf in i2c_init()   Wolfgang Denk
• [U-Boot] U-Boot 2009.03 Release   Wolfgang Denk
• [U-Boot] adding splashscreen   Wolfgang Denk
• [U-Boot] U-Boot 2009.03 Release   Wolfgang Denk
• [U-Boot] [PATCH 1/3] mpc5200: do not use printf in i2c_init()   Wolfgang Denk
• [U-Boot] [PATCH 3/3] mpc5200: make i2c faster   Wolfgang Denk
• [U-Boot] [PATCH 1/3] mpc5200: do not use printf in i2c_init()   Wolfgang Denk
• [U-Boot] [PATCH 3/3] mpc5200: make i2c faster   Wolfgang Denk
• [U-Boot] [PATCH] Make flash protection work, when the environment is in EEPROM   Wolfgang Denk
• [U-Boot] [PATCH] Make flash protection work, when the environment is in EEPROM   Wolfgang Denk
• [U-Boot] [PATCH] Add define for mpc5200 CDM_CLK_ENA   Wolfgang Denk
• [U-Boot] [PATCH 3/3] mpc5200: make i2c faster   Wolfgang Denk
• [U-Boot] Please pull u-boot-cfi-flash   Wolfgang Denk
• [U-Boot] [GIT PULL] AVR32 update   Wolfgang Denk
• [U-Boot] [PATCH] board support patch for phyCORE-MPC5200B-tiny   Wolfgang Denk
• [U-Boot] [PATCH] board support patch for phyCORE-MPC5200B-tiny   Wolfgang Denk
• [U-Boot] [PATCH 1/2] Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN   Wolfgang Denk
• [U-Boot] [PATCH 1/2] Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN   Wolfgang Denk
• [U-Boot] [PATCH 2] board support patch for phyCORE-MPC5200B-tiny   Wolfgang Denk
• [U-Boot] minicom garbled   Wolfgang Denk
• [U-Boot] [PATCH 1/2] LPC2468 support   Wolfgang Denk
• [U-Boot] [PATCH v1 0/7] Update for inka4x0 plus some new features   Wolfgang Denk
• [U-Boot] [PATCH] inka4x0: Add hardware diagnosis functions for inka4x0   Wolfgang Denk
• [U-Boot] [PATCH] inka4x0: Add hardware diagnosis functions for inka4x0   Wolfgang Denk
• [U-Boot] [PATCH] drivers/twserial: Add protocol driver for "three wire serial" interface.   Wolfgang Denk
• [U-Boot] [PATCH] inka4x0: Add hardware diagnosis and RTC in configuration.   Wolfgang Denk
• [U-Boot] [PATCH] inka4x0: Add hardware diagnosis and RTC in configuration.   Wolfgang Denk
• [U-Boot] [PATCH 1/2] LPC2468 support   Wolfgang Denk
• [U-Boot] [PATCH] inka4x0: Add hardware diagnosis functions for inka4x0   Wolfgang Denk
• [U-Boot] CONFIG_SERVERIP   Wolfgang Denk
• [U-Boot] [PATCH v2 3/7] drivers/twserial: Add protocol driver for "three wire serial" interface.   Wolfgang Denk
• [U-Boot] Pull request: nand flash   Wolfgang Denk
• [U-Boot] Pull request u-boot-blackfin.git   Wolfgang Denk
• [U-Boot] [PATCH 1/3] mpc5200: do not use printf in i2c_init()   Wolfgang Denk
• [U-Boot] [PATCH 2/3] mpc52xx phy: initialize only when needed   Wolfgang Denk
• [U-Boot] [RFC] cfi_flash and complex address mapping   Wolfgang Denk
• [U-Boot] Size of external u-boot commands   Wolfgang Denk
• [U-Boot] Size of external u-boot commands   Wolfgang Denk
• [U-Boot] ARM Pull Request   Wolfgang Denk
• [U-Boot] AT91 Pull Request   Wolfgang Denk
• [U-Boot] Please pull u-boot-ppc4xx   Wolfgang Denk
• [U-Boot] Size of external u-boot commands   Wolfgang Denk
• [U-Boot] [PATCH v2 4/7] rtc: add support for 4543 RTC (manufactured by e.g. EPSON)   Wolfgang Denk
• [U-Boot] Size of external u-boot commands   Wolfgang Denk
• [U-Boot] u-boot-2009.03 Hangs   Wolfgang Denk
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Wolfgang Denk
• [U-Boot] [PATCH] omap3: mmc: mmc2 support   Wolfgang Denk
• [U-Boot] [PATCH 3/3] MPC85xx: Add MPC8569MDS board support   Wolfgang Denk
• [U-Boot] [PATCH 1/3] MPC85xx: Add MPC8569 CPU support   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] [PATCH v2] ppc: cleanup compilererrors/warnings   Wolfgang Denk
• [U-Boot] [PATCH] karef/metrobox/xpedite1k: fix eth_setenv_enetaddr typos   Wolfgang Denk
• [U-Boot] [PATCH] MAINTAINERS: Keep list sorted.   Wolfgang Denk
• [U-Boot] [PATCH] MAINTAINERS: Add entry for 'inka4x0' board.   Wolfgang Denk
• [U-Boot] [PATCH 2/2] at91: Add support for esd MEESC board   Wolfgang Denk
• [U-Boot] [PATCH] mpc5xxx: Add structure definition for several more register blocks.   Wolfgang Denk
• [U-Boot] [PATCH v2 1/7] command.c: Expose the core of do_help as _do_help to the rest of u-boot.   Wolfgang Denk
• [U-Boot] [PATCH v2 3/7] drivers/twserial: Add protocol driver for "three wire serial" interface.   Wolfgang Denk
• [U-Boot] [PATCH v4] board support patch for phyCORE-MPC5200B-tiny   Wolfgang Denk
• [U-Boot] [PATCH 1/2] at91: Improved Atmel AT45DB081 dataflash support   Wolfgang Denk
• [U-Boot] Problems with ext2ls & SD   Wolfgang Denk
• [U-Boot] [PATCH] Add "source" command; prepare removal of "autoscr" command   Wolfgang Denk
• [U-Boot] Out-of-tree build of API code fails   Wolfgang Denk
• [U-Boot] [PATCH] cs8900 compile fix   Wolfgang Denk
• [U-Boot] [PATCH] cs8900 compile fix   Wolfgang Denk
• [U-Boot] [PATCH] ppc: cleanup compilererrors/warnings   Wolfgang Denk
• [U-Boot] Out-of-tree build for imx31_phycore_eet fails   Wolfgang Denk
• [U-Boot] [PATCH] Fix implicit declaration of function 'eth_[gs]etenv_enetaddr'   Wolfgang Denk
• [U-Boot] [PATCH] ARM: fix warning: 'print_eth' defined but not used   Wolfgang Denk
• [U-Boot] [PATCH] VCMA9: fix compile errors   Wolfgang Denk
• [U-Boot] [PATCH] ppc: cleanup compilererrors/warnings   Wolfgang Denk
• [U-Boot] help with uboot-1.2 on mpc8548e   Wolfgang Denk
• [U-Boot] MPC850: strange problem with icache   Wolfgang Denk
• [U-Boot] ARM Pull Request   Wolfgang Denk
• [U-Boot] [PATCH v3 1/5] drivers/twserial: Add protocol driver for "three wire serial" interface.   Wolfgang Denk
• [U-Boot] [PATCH v3 2/5] rtc: add support for 4543 RTC (manufactured by e.g. EPSON)   Wolfgang Denk
• [U-Boot] [PATCH v3 3/5] inka4x0: Add hardware diagnosis functions for inka4x0   Wolfgang Denk
• [U-Boot] [PATCH v3 4/5] inka4x0: Add hardware diagnosis and RTC in configuration.   Wolfgang Denk
• [U-Boot] [PATCH v3 5/5] inka4x0: Use proper accessor macros for memory mapped registers.   Wolfgang Denk
• [U-Boot] [PATCH] NetLoop initialization bug   Wolfgang Denk
• [U-Boot] [PATCH 12/13] at91: add hardware i2c drivers   Wolfgang Denk
• [U-Boot] [PATCH] OMAP3: Update Overo pin mux for new expansion board   Wolfgang Denk
• [U-Boot] Out-of-tree build for imx31_phycore_eet fails   Wolfgang Denk
• [U-Boot] ARM Pull Request   Wolfgang Denk
• [U-Boot] [PATCH] Add support for Faraday RTC IP FTRTC   Wolfgang Denk
• [U-Boot] core ticks/timer code   Wolfgang Denk
• [U-Boot] [PATCH] Add "source" command; prepare removal of "autoscr" command   Wolfgang Denk
• [U-Boot] core ticks/timer code   Wolfgang Denk
• [U-Boot] core ticks/timer code   Wolfgang Denk
• [U-Boot] core ticks/timer code   Wolfgang Denk
• [U-Boot] [PATCH 13/13] at91sam9263ek: active hush and auto compelete support   Wolfgang Denk
• [U-Boot] [PATCH 10/13] at91: move usb driver to drivers/usb   Wolfgang Denk
• [U-Boot] [PATCH 10/13] at91: move usb driver to drivers/usb   Wolfgang Denk
• [U-Boot] [PATCH 12/13] at91: add hardware i2c drivers   Wolfgang Denk
• [U-Boot] core ticks/timer code   Wolfgang Denk
• [U-Boot] core ticks/timer code   Wolfgang Denk
• [U-Boot] Problems with ext2ls & SD   Wolfgang Denk
• [U-Boot] [PATCH] mpc83xx: Set guarded bit on BAT that covers the end of the address space   Wolfgang Denk
• [U-Boot] [PATCH V2] mpc5200: reduce delays in i2c   Wolfgang Denk
• [U-Boot] Maillist issue of u-boot at lists.denx.de   Wolfgang Denk
• [U-Boot] [PATCH 1/1] at91sam9/at91cap: improve clock framework   Wolfgang Denk
• [U-Boot] RAM Probing for ads5121rev4   Wolfgang Denk
• [U-Boot] [PATCH 09/13] s3c64xx: move usb driver to drivers/usb   Wolfgang Denk
• [U-Boot] [PATCH] mpc83xx: Set guarded bit on BAT that covers the end of the address space   Wolfgang Denk
• [U-Boot] [PATCH 1/1] at91sam9/at91cap: improve clock framework   Wolfgang Denk
• [U-Boot] core ticks/timer code   Wolfgang Denk
• [U-Boot] tftp download with USB vitrual ethnet driver   Dennis.Yxun
• [U-Boot] 答复: 答复: tftp download with USB vitrual ethnet driver   Dennis.Yxun
• [U-Boot] U-Boot Scripting suggestions to decrement counter in EEPROM. Alignment bug in itest on ARM.   Tom Evans
• [U-Boot] U-Boot Scripting suggestions to decrement, counter in EEPROM.   Tom Evans
• [U-Boot] Alignment bug in itest on ARM & doesn't work on big-endian either?   Tom Evans
• [U-Boot] [PATCH] at91: Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.   Nicolas Ferre
• [U-Boot] Help on getting the AT91 u-boot patch   Nicolas Ferre
• [U-Boot] [PATCH] at91: Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.   Nicolas Ferre
• [U-Boot] [PATCH] at91: Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.   Nicolas Ferre
• [U-Boot] [PATCH] at91: Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.   Nicolas Ferre
• [U-Boot] AT91: NAND OOB and ECC in U-Boot vs Linux   Nicolas Ferre
• [U-Boot] [PATCH] at91: Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.   Nicolas Ferre
• [U-Boot] [PATCH] Network AT91 AVR32: generic way of addressing USRIO register layout   Nicolas Ferre
• [U-Boot] [PATCH] fsl: Don't spew messages related to PHY fixup of device tree   Andy Fleming
• [U-Boot] [PATCH 4/6] fsl_esdhc: Add device tree fixups   Andy Fleming
• [U-Boot] [PATCH] [85xx] Add eTSEC 1/2 IO override control (corrected)   Andy Fleming
• [U-Boot] Please pull u-boot-mpc85xx.git   Andy Fleming
• [U-Boot] Status open patches: 8xxx   Andy Fleming
• [U-Boot] [PATCH 17/26 v2] tools/Makefile: Give precedence to U-Boot's include directory   Andy Fleming
• [U-Boot] Please pull u-boot-mpc85xx.git   Andy Fleming
• [U-Boot] USB EHCI driver   Rendine Francesco
• [U-Boot] USB Driver for ADS5121e   FrancescoVT
• [U-Boot] USB EHCI driver   FrancescoVT
• [U-Boot] USB EHCI driver   FrancescoVT
• [U-Boot] USB EHCI driver   FrancescoVT
• [U-Boot] USB EHCI driver   FrancescoVT
• [U-Boot] USB EHCI driver   FrancescoVT
• [U-Boot] U-boot debugger/emulator   Frank
• [U-Boot] [PATCH 03/15] tools/Makefile: Build bmp_logo only when LCD or VIDEO logos are enabled   Mike Frysinger
• [U-Boot] [PATCH 10/15] gen_eth_addr: Use POSIX rand() and srand()   Mike Frysinger
• [U-Boot] [PATCH 11/15] elf.h: Add missing int32_t typedef for WIN32 compilers   Mike Frysinger
• [U-Boot] [PATCH 14/15] Deleted unused tools/Makefile.win32   Mike Frysinger
• [U-Boot] [PATCH 12/15] Add support for building native win32 tools   Mike Frysinger
• [U-Boot] [PATCH 03/15] tools/Makefile: Build bmp_logo only when LCD or VIDEO logos are enabled   Mike Frysinger
• [U-Boot] [PATCH 00/15] tools/Makefile cleanup and win32 tool support   Mike Frysinger
• [U-Boot] [PATCH 12/15] Add support for building native win32 tools   Mike Frysinger
• [U-Boot] [PATCH 17/26 v2] tools/Makefile: Give precedence to U-Boot's include directory   Mike Frysinger
• [U-Boot] [PATCH V2] example/standalone: introduce STANDALONE_LOAD_ADDR   Mike Frysinger
• [U-Boot] [PATCH V2] example/standalone: introduce STANDALONE_LOAD_ADDR   Mike Frysinger
• [U-Boot] [PATCH V2] example/standalone: introduce STANDALONE_LOAD_ADDR   Mike Frysinger
• [U-Boot] [PATCH V2] example/standalone: introduce STANDALONE_LOAD_ADDR   Mike Frysinger
• [U-Boot] [PATCH] Make nboot skip bad blocks   Mike Frysinger
• [U-Boot] [PATCH 2/7] mtd: SPI Flash: Support the Spansion Flash   Mike Frysinger
• [U-Boot] [PATCH 6/7] Add support for save the env to SDcard   Mike Frysinger
• [U-Boot] [PATCH 3/7] eSPI: add eSPI controller support   Mike Frysinger
• [U-Boot] [PATCH 3/7] eSPI: add eSPI controller support   Mike Frysinger
• [U-Boot] Generic MII interface   Mike Frysinger
• [U-Boot] [PATCH/next v3 00/28] tools/Makefile cleanup and win32 tool support   Mike Frysinger
• [U-Boot] [PATCH] 8313erdb: Set guarded bit on BAT that covers the end of the address space.   Mike Frysinger
• [U-Boot] [PATCH] NAND: Have nboot accept .e and .i as legacy no-ops.   Mike Frysinger
• [U-Boot] [PATCH] 8313erdb: Set guarded bit on BAT that covers the end of the address space.   Mike Frysinger
• [U-Boot] [PATCH] NAND: Have nboot accept .e and .i as legacy no-ops.   Mike Frysinger
• [U-Boot] [PATCH] 8313erdb: Set guarded bit on BAT that covers the end of the address space.   Mike Frysinger
• [U-Boot] [PATCH] 8313erdb: Set guarded bit on BAT that covers the end of the address space.   Mike Frysinger
• [U-Boot] [PATCH/next v3 00/28] tools/Makefile cleanup and win32 tool support   Mike Frysinger
• [U-Boot] [PATCH 1/1] mtd: add some at45 spi flash support   Mike Frysinger
• [U-Boot] [PATCH] smc91111_eeprom: move board-specific init into SMC91111_EEPROM_INIT()   Mike Frysinger
• [U-Boot] [PATCH 00/32] Blackfin updates for 2009.05   Mike Frysinger
• [U-Boot] [PATCH 01/32] Blackfin: update anomaly lists   Mike Frysinger
• [U-Boot] [PATCH 02/32] Blackfin: fix SWRST/SYSCR register sizes   Mike Frysinger
• [U-Boot] [PATCH 03/32] Blackfin: unify net-related init code   Mike Frysinger
• [U-Boot] [PATCH 04/32] Blackfin: bf537-stamp: move CONFIG_POST handling to COBJS-$(...)   Mike Frysinger
• [U-Boot] [PATCH 05/32] Blackfin: fix jtag console tstc   Mike Frysinger
• [U-Boot] [PATCH 06/32] Blackfin: spi: there is no PORTJ_FER MMR on BF537   Mike Frysinger
• [U-Boot] [PATCH 07/32] Blackfin: mark bfin_reset static   Mike Frysinger
• [U-Boot] [PATCH 08/32] Blackfin: update lockbox api according to latest documentation   Mike Frysinger
• [U-Boot] [PATCH 09/32] Blackfin: safely flush data caches when in writeback mode   Mike Frysinger
• [U-Boot] [PATCH 10/32] Blackfin: print out Flash: before checking it   Mike Frysinger
• [U-Boot] [PATCH 11/32] Blackfin: drop now-unused CONFIG_SYS_BFIN_CMD_XXX   Mike Frysinger
• [U-Boot] [PATCH 12/32] Blackfin: unify duplicate CPU port definitions   Mike Frysinger
• [U-Boot] [PATCH 13/32] Blackfin: drop SPORT_TX read helper macros   Mike Frysinger
• [U-Boot] [PATCH 14/32] Blackfin: fix SIC_RVECT definition: it is 16bits, not 32bits   Mike Frysinger
• [U-Boot] [PATCH 15/32] Blackfin: simplify symbol_lookup() a bit   Mike Frysinger
• [U-Boot] [PATCH 16/32] Blackfin: kill off LDR jump block   Mike Frysinger
• [U-Boot] [PATCH 17/32] Blackfin: handle reboot anomaly 432   Mike Frysinger
• [U-Boot] [PATCH 18/32] Blackfin: setup a sane default EBIU_SDBCTL for SDRAM controllers   Mike Frysinger
• [U-Boot] [PATCH 19/32] Blackfin: do not program voltage regulator on parts that do not have one   Mike Frysinger
• [U-Boot] [PATCH 20/32] Blackfin: put memory into self-refresh before/after programming clocks   Mike Frysinger
• [U-Boot] [PATCH 21/32] Blackfin: unify common ADI board settings   Mike Frysinger
• [U-Boot] [PATCH 22/32] Blackfin: bf533-stamp: rewrite startup LED notifications   Mike Frysinger
• [U-Boot] [PATCH 23/32] Blackfin: bf533-stamp: bump up default clocks   Mike Frysinger
• [U-Boot] [PATCH 24/32] Blackfin: add clkin_hz= to default kernel command line for ADI boards   Mike Frysinger
• [U-Boot] [PATCH 25/32] Blackfin: bf537-stamp: rewrite MAC-in-flash handling   Mike Frysinger
• [U-Boot] [PATCH 26/32] Blackfin: bf537-stamp: bump default SCLK up to 125MHz   Mike Frysinger
• [U-Boot] [PATCH 27/32] Blackfin: bf537-stamp: increase monitor size   Mike Frysinger
• [U-Boot] [PATCH 28/32] Blackfin: add hack for crappy m25p80   Mike Frysinger
• [U-Boot] [PATCH 29/32] Blackfin: add support for SST SPI flashes   Mike Frysinger
• [U-Boot] [PATCH 30/32] Blackfin: overhaul SPI flash handling to speed things up   Mike Frysinger
• [U-Boot] [PATCH 31/32] Blackfin: add support for S25FL128 parts   Mike Frysinger
• [U-Boot] [PATCH 32/32] Blackfin: bf537-stamp: split post code out into dedicated post.c   Mike Frysinger
• [U-Boot] [PATCH 17/26 v2] tools/Makefile: Give precedence to U-Boot's include directory   Mike Frysinger
• [U-Boot] [PATCH] more command usage cleanup   Mike Frysinger
• [U-Boot] [PATCH] sf: drop DEBUG defines   Mike Frysinger
• [U-Boot] [PATCH] ppc: cleanup compilererrors/warnings   Mike Frysinger
• [U-Boot] Pull request u-boot-blackfin.git   Mike Frysinger
• [U-Boot] [PATCH] ppc: cleanup compilererrors/warnings   Mike Frysinger
• [U-Boot] [PATCH] karef/metrobox/xpedite1k: fix eth_setenv_enetaddr typos   Mike Frysinger
• [U-Boot] [PATCH v2] ppc: cleanup compilererrors/warnings   Mike Frysinger
• [U-Boot] Size of external u-boot commands   Mike Frysinger
• [U-Boot] Size of external u-boot commands   Mike Frysinger
• [U-Boot] [PATCH] sf: add driver for SST flashes   Mike Frysinger
• [U-Boot] [PATCH] sf: stmicro: drop redundant id read   Mike Frysinger
• [U-Boot] core ticks/timer code   Mike Frysinger
• [U-Boot] [PATCH] cmd_mmc: add support device command for selecting mmc device   Mike Frysinger
• [U-Boot] [PATCH] SF: always read 5 bytes for the idcode   Mike Frysinger
• [U-Boot] [PATCH] SF: always read 5 bytes for the idcode   Mike Frysinger
• [U-Boot] [PATCH 2/7] mtd: SPI Flash: Support the Spansion Flash   Mike Frysinger
• [U-Boot] [PATCH v2] sf: add driver for SST flashes   Mike Frysinger
• [U-Boot] [PATCH v2] sf: always read 5 bytes for the idcode   Mike Frysinger
• [U-Boot] pending patches website   Mike Frysinger
• [U-Boot] core ticks/timer code   Mike Frysinger
• [U-Boot] [PATCH 2/7] mtd: SPI Flash: Support the Spansion Flash   Mike Frysinger
• [U-Boot] sf patches   Mike Frysinger
• [U-Boot] core ticks/timer code   Mike Frysinger
• [U-Boot] [PATCH] Add support for Faraday Ethernet IP FTMAC100   Mike Frysinger
• [U-Boot] core ticks/timer code   Mike Frysinger
• [U-Boot] [PATCH] ppc4xx: PMC440: Only use one CS (rank) in DDR2 configuration   Matthias Fuchs
• [U-Boot] Uboot and DMA   praveen G
• [U-Boot] Uboot and DMA   praveen G
• [U-Boot] Uboot and DMA   praveen G
• [U-Boot] Building u-boot on a PowerPC host   Kumar Gala
• [U-Boot] [PATCH] 8313erdb: Set guarded bit on BAT that covers the end of the address space.   Kumar Gala
• [U-Boot] [PATCH] Coldfire: I2C: Update I2CFDR frequency divider 0x0E value from 192 to 204   Kumar Gala
• [U-Boot] [PATCH] Coldfire: I2C: Update I2CFDR frequency divider 0x0E value from 192 to 204   Kumar Gala
• [U-Boot] [PATCH] 85xx: Add support for additional e500mc features   Kumar Gala
• [U-Boot] Booting PowerPc   Kumar Gala
• [U-Boot] [PATCH 1/3] Add LSDMR (SDRAM Mode Register) definition on localbus   Kumar Gala
• [U-Boot] [PATCH 2/3] 85xx: Use common LSDMR defines from asm/fsl_lbc.h   Kumar Gala
• [U-Boot] [PATCH 3/3] 83xx: Use common LSDMR defines from asm/fsl_lbc.h   Kumar Gala
• [U-Boot] Please pull u-boot-mpc85xx.git   Kumar Gala
• [U-Boot] video: mx3fb: board specific settings?   Jens Gehrlein
• [U-Boot] PXA SPI Mode support for MMC/SD Cards   A. Geisreiter
• [U-Boot] Board Support for Quantum (Eurotech Ltd)   A. Geisreiter
• [U-Boot] [PATCH 1/2] at91: Improved Atmel AT45DB081 dataflash support   Daniel Gorsulowski
• [U-Boot] [PATCH 2/2] at91: Add support for esd MEESC board   Daniel Gorsulowski
• [U-Boot] How to Remove the padding bits from u-boot.bin   Anatolij Gustschin
• [U-Boot] About PCI of U-BOOT of CANYONLANDS   Anatolij Gustschin
• [U-Boot] About PCI of U-BOOT of CANYONLANDS   Anatolij Gustschin
• [U-Boot] About PCI of U-BOOT of CANYONLANDS   Anatolij Gustschin
• [U-Boot] About PCI of U-BOOT of CANYONLANDS   Anatolij Gustschin
• [U-Boot] About PCI of U-BOOT of CANYONLANDS   Anatolij Gustschin
• [U-Boot] About PCI of U-BOOT of CANYONLANDS   Anatolij Gustschin
• [U-Boot] [PATCH] ppc4xx: Fix bug in PCI outbound map configuration for canyonlands   Anatolij Gustschin
• [U-Boot] [PATCH] inka4x0: Add hardware diagnosis functions for inka4x0   Anatolij Gustschin
• [U-Boot] [PATCH] inka4x0: Add hardware diagnosis and RTC in configuration.   Anatolij Gustschin
• [U-Boot] [PATCH v2 3/7] drivers/twserial: Add protocol driver for "three wire serial" interface.   Anatolij Gustschin
• [U-Boot] [PATCH v2 4/7] rtc: add support for 4543 RTC (manufactured by e.g. EPSON)   Anatolij Gustschin
• [U-Boot] [PATCH v2 4/7] rtc: add support for 4543 RTC (manufactured by e.g. EPSON)   Anatolij Gustschin
• [U-Boot] What to do for a working BIOSEMU and ATI_RADEON_FB environment?   Anatolij Gustschin
• [U-Boot] What to do for a working BIOSEMU and ATI_RADEON_FB environment?   Anatolij Gustschin
• [U-Boot] What to do for a working BIOSEMU and ATI_RADEON_FB environment?   Anatolij Gustschin
• [U-Boot] [PATCH v4] board support patch for phyCORE-MPC5200B-tiny   Anatolij Gustschin
• [U-Boot] MMU/PPC question   SortaSBS Guy
• [U-Boot] [PATCH] Fix OneNAND ipl to read 256KB   Rohit Hagargundgi
• [U-Boot] [PATCH v2 1/4] Flex-OneNAND driver   Rohit Hagargundgi
• [U-Boot] [PATCH v2 2/4] Environment support for Flex-OneNAND   Rohit Hagargundgi
• [U-Boot] [PATCH v2 3/4] JFFS2 commands support for Flex-OneNAND   Rohit Hagargundgi
• [U-Boot] [PATCH v2 4/4] Flex-OneNAND boundary setting command   Rohit Hagargundgi
• [U-Boot] [PATCH] Fix OneNAND ipl to read 256KB   Rohit Hagargundgi
• [U-Boot] [PATCH] Fix OneNAND ipl to read 256KB   Rohit Hagargundgi
• [U-Boot] [PATCH 1/2] Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN   Rohit Hagargundgi
• [U-Boot] [PATCH 2/2] Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN   Rohit Hagargundgi
• [U-Boot] [PATCH] Make flash protection work, when the environment is in EEPROM   Sascha Hauer
• [U-Boot] [PATCH 3/3] mpc5200: make i2c faster   Sascha Hauer
• [U-Boot] [PATCH] Make flash protection work, when the environment is in EEPROM   Sascha Hauer
• [U-Boot] how do you build u-boot under Windows XP SP2   David Hawkins
• [U-Boot] [PATCH 1/7] eSPI: add the eSPI register support   Mingkai Hu
• [U-Boot] [PATCH 2/7] mtd: SPI Flash: Support the Spansion Flash   Mingkai Hu
• [U-Boot] [PATCH 3/7] eSPI: add eSPI controller support   Mingkai Hu
• [U-Boot] [PATCH 4/7] eSPI: make the chip selsec enable   Mingkai Hu
• [U-Boot] [PATCH 5/7] Make a special uboot used for booting from SDcard or SPI flash   Mingkai Hu
• [U-Boot] [PATCH 6/7] Add support for save the env to SDcard   Mingkai Hu
• [U-Boot] [PATCH 7/7] Save the env variables to SDcard and SPI flash for MPC8536DS   Mingkai Hu
• [U-Boot] [PATCH] eSPI: add the eSPI register support   Mingkai Hu
• [U-Boot] [PATCH v2] mtd: SPI Flash: Support the Spansion Flash   Mingkai Hu
• [U-Boot] About PCI of U-BOOT of CANYONLANDS   Kazuaki Ichinohe
• [U-Boot] About PCI of U-BOOT of CANYONLANDS   Kazuaki Ichinohe
• [U-Boot] About PCI of U-BOOT of CANYONLANDS   Kazuaki Ichinohe
• [U-Boot] About PCI of U-BOOT of CANYONLANDS   Kazuaki Ichinohe
• [U-Boot] About PCI of U-BOOT of CANYONLANDS   Kazuaki Ichinohe
• [U-Boot] About PCI of U-BOOT of CANYONLANDS   Kazuaki Ichinohe
• [U-Boot] About PCI of U-BOOT of CANYONLANDS   Kazuaki Ichinohe
• [U-Boot] About PCI of U-BOOT of CANYONLANDS   Kazuaki Ichinohe
• [U-Boot] About PCI of U-BOOT of CANYONLANDS   Kazuaki Ichinohe
• [U-Boot] About PCI of U-BOOT of CANYONLANDS   Kazuaki Ichinohe
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Kazuaki Ichinohe
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Kazuaki Ichinohe
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Kazuaki Ichinohe
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Kazuaki Ichinohe
• [U-Boot] [PATCH 1/1] at91: add support for the PM9263 board of Ronetix   RONETIX - Ilko Iliev
• [U-Boot] [PATCH v2 1/2] sh: Add macros for SH-4A 32-Bit Address Extended Mode   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v2 2/2] sh7785lcr: Add support 32-Bit Extended Address Mode   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] ap325rxa: Change the wait cycle in the area 5   Nobuhiro Iwamatsu
• [U-Boot] Pull request: u-boot-sh   Nobuhiro Iwamatsu
• [U-Boot] [PATCH to 2008.03] net: sh_eth: Remove sh_eth_reset() from halt function   Nobuhiro Iwamatsu
• [U-Boot] [PATCH to 2008.03] net: sh_eth: Remove sh_eth_reset() from halt function   Nobuhiro Iwamatsu
• [U-Boot] SH Build status (Re: CUSTODIANS: Urgent boarding call for flight 2009.03)   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/1] Fix JFFS2 NOR sector size routine   Mark Jackson
• [U-Boot] [PATCH 1/1] Fix JFFS2 NOR sector size routine   Mark Jackson
• [U-Boot] Size of external u-boot commands   Rafal Jaworowski
• [U-Boot] Out-of-tree build of API code fails   Rafal Jaworowski
• [U-Boot] u-boot-v2 2.0.0 rc7 broken compatibility with SMSC LAN9313 vs rc3   John Jeffers
• [U-Boot] u-boot-v2 compatibility broken with Spansion S29GL512/256/128N in rc7   John Jeffers
• [U-Boot] test please ignore   John Jeffers
• [U-Boot] [PATCH] MPC5200 FEC MII speed register   Jon
• [U-Boot] [PATCH] .gitignore for generated files in api_examples directory   Jon
• [U-Boot] [PATCH 0/3] Three mpc5200 patches from Pengutronix.de   Jon
• [U-Boot] [PATCH 1/3] mpc5200: do not use printf in i2c_init()   Jon
• [U-Boot] [PATCH 2/3] mpc52xx phy: initialize only when needed   Jon
• [U-Boot] [PATCH 3/3] mpc5200: make i2c faster   Jon
• [U-Boot] [PATCH] Make flash protection work, when the environment is in EEPROM   Jon
• [U-Boot] u-boot for MPC8347   Dave Jurasek
• [U-Boot] AT91RM9200 U-Boot can not load initrd from flash   Dmitry K
• [U-Boot] [PATCH] omap3: mmc: mmc2 support   Minkyu Kang
• [U-Boot] omap3: write to mmc   Minkyu Kang
• [U-Boot] [PATCH] omap3: mmc: mmc2 support   Minkyu Kang
• [U-Boot] [PATCH] cmd_mmc: add support device command for selecting mmc device   Minkyu Kang
• [U-Boot] [PATCH] omap3: mmc: mmc2 support   Minkyu Kang
• [U-Boot] [PATCH] cmd_mmc: add support device command for selecting mmc device (resend)   Minkyu Kang
• [U-Boot] [PATCH] PowerPC MPC85xx: don't hang on read exception   Andrew Klossner
• [U-Boot] [PATCH] PowerPC MPC85xx: don't hang on read exception   Andrew Klossner
• [U-Boot] [PATCH] PowerPC MPC85xx: don't hang on read exception   Andrew Klossner
• [U-Boot] AT91RM9200 U-Boot can not load initrd from flash   Dmitry Koroban
• [U-Boot] [PATCH] tools/setlocalversion: use git svn instead of git-svn   Peter Korsgaard
• [U-Boot] Timer on OMAP3430SDP.   Radha Krishna
• [U-Boot] MIPS build status (Re: CUSTODIANS: Urgent boarding call for flight 2009.03)   Shinya Kuribayashi
• [U-Boot] [PATCH v2] Support for PXA27X UDC.   Vivek Kutal
• [U-Boot] [PATCH v2] Support for PXA27X UDC.   Vivek Kutal
• [U-Boot] [PATCH v2] Support for PXA27X UDC.   Vivek Kutal
• [U-Boot] [PATCH v2] at91: change CONFIG_SYS_HZ to 1000   Sergey Lapin
• [U-Boot] [PATCH] UBIFS: Missing offset relocation for compressor 'none'   Michael Lawnick
• [U-Boot] [PATCH] UBIFS: Missing offset relocation for compressor 'none'   Michael Lawnick
• [U-Boot] [PATCH v2] UBIFS: Missing offset relocation for compressor 'none'   Michael Lawnick
• [U-Boot] Booting PowerPc   Günter Leonhardt
• [U-Boot] Question about U-Boot porting based on ppc architecture   Chengzhi Li
• [U-Boot] [PATCH] ARM: Add the imx31_phycore_eet board to MAKEALL   Guennadi Liakhovetski
• [U-Boot] Out-of-tree build for imx31_phycore_eet fails   Guennadi Liakhovetski
• [U-Boot] Status open patches: ColdFire   TC Liew
• [U-Boot] Coldfire: MCF5271: Periodic HW watchdog petting and sleep function does not work.   TC Liew
• [U-Boot] [PATCH] Coldfire: I2C: Update I2CFDR frequency divider 0x0E value from 192 to 204   TC Liew
• [U-Boot] Coldfire: MCF5271: Periodic HW watchdog petting and sleep function does not work.   TC Liew
• [U-Boot] [PATCH] ColdFire: Fix M54451 serial boot dram setup   Tsi-Chung Liew
• [U-Boot] [PATCH] ColdFire: Provide gzip image size V2 & V3 platforms   Tsi-Chung Liew
• [U-Boot] [PATCH] ColdFire: PLATFORM_CPPFLAGS updates for new compiler   Tsi-Chung Liew
• [U-Boot] [PATCH] ColdFire: Fix M5329EVB and M5373EVB nand issue   Tsi-Chung Liew
• [U-Boot] [PATCH] ColdFire: Fix incorrect definition   Tsi-Chung Liew
• [U-Boot] MMU/PPC question   Grant Likely
• [U-Boot] [PATCH 3/3] mpc5200: make i2c faster   Grant Likely
• [U-Boot] U-boot NAND boot on IMX31 3stack(ARM)   Magnus Lilja
• [U-Boot] U-boot NAND boot on IMX31 3stack(ARM)   Magnus Lilja
• [U-Boot] U-boot NAND boot on IMX31 3stack(ARM)   Magnus Lilja
• [U-Boot] U-boot NAND boot on IMX31 3stack(ARM)   Magnus Lilja
• [U-Boot] [PATCH 1/2] fsl-ddr: Fix two bugs in the ddr infrastructure   Dave Liu
• [U-Boot] [PATCH 2/2] fsl-ddr: add the DDR3 SPD infrastructure   Dave Liu
• [U-Boot] [PATCH] 85xx: Fix the clock adjust of mpc8569mds board   Dave Liu
• [U-Boot] UBIFS - Reading superblock error   DATACOM - Mallmann
• [U-Boot] USB EHCI driver   Gupta Maneesh-B18878
• [U-Boot] USB EHCI driver   Gupta Maneesh-B18878
• [U-Boot] [PATCH] Add imls utility command   Marco
• [U-Boot] [PATCH] Add imls utility command   Marco
• [U-Boot] [PATCH] NIOS2: Added DE2 board with SD support   Scott McNutt
• [U-Boot] [PATCH 3/7] eSPI: add eSPI controller support   Scott McNutt
• [U-Boot] core ticks/timer code   Scott McNutt
• [U-Boot] [PATCH 1/1] Changes for single binary image for u-boot for NAND/OneNAND flash.   Nishanth Menon
• [U-Boot] [PATCH 1/1] Fix for running examples on OMAP3 EVM board   Nishanth Menon
• [U-Boot] [PATCH 1/1] Fix for running examples on OMAP3 EVM board   Nishanth Menon
• [U-Boot] [PATCH 1/1] Changes for single binary image for u-boot for NAND/OneNAND flash.   Nishanth Menon
• [U-Boot] Vector set up in u-boot for OMAP3530.   Nishanth Menon
• [U-Boot] [PATCH 1/1] Fix for running examples on OMAP3 EVM board   Nishanth Menon
• [U-Boot] DeAsserting UART Interrupt line on OMAP3530 for uboot   Nishanth Menon
• [U-Boot] [PATCH]OMAP3:Beagle: Enable mtdparts   Nishanth Menon
• [U-Boot] Display Sub SYstem Controller Initialization   Nishanth Menon
• [U-Boot] U-boot and JFFS2   Nishanth Menon
• [U-Boot] U-boot and JFFS2   Nishanth Menon
• [U-Boot] U-boot and JFFS2   Nishanth Menon
• [U-Boot] [PATCH] Update board NetStar   Ladislav Michl
• [U-Boot] [PATCH] Make nboot skip bad blocks   Ladislav Michl
• [U-Boot] [PATCH] Make nboot skip bad blocks   Ladislav Michl
• [U-Boot] [PATCH] Update board NetStar   Ladislav Michl
• [U-Boot] [PATCH 1/5] NetStar: config reindentation   Ladislav Michl
• [U-Boot] [PATCH 2/5] NetStar: Fix NAND   Ladislav Michl
• [U-Boot] [PATCH 3/5] NetStar: use generic flash driver   Ladislav Michl
• [U-Boot] [PATCH 4/5] NetStar: add RTC support   Ladislav Michl
• [U-Boot] [PATCH 5/5] NetStar: update crcit utility   Ladislav Michl
• [U-Boot] [PATCH 2/5] NetStar: Fix NAND   Ladislav Michl
• [U-Boot] [PATCH v4] Separate mtdparts command from jffs2   Ladislav Michl
• [U-Boot] [PATCH] Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ   Ladislav Michl
• [U-Boot] [PATCH] CMC-PU2 compile fix   Ladislav Michl
• [U-Boot] [PATCH] cs8900 compile fix   Ladislav Michl
• [U-Boot] [PATCH 1/3] OMAP: reindent timer code   Ladislav Michl
• [U-Boot] [PATCH 2/3] OMAP: rename timer divisor   Ladislav Michl
• [U-Boot] [PATCH 3/3] OMAP: use {read, write}l to access timer registers   Ladislav Michl
• [U-Boot] [PATCH 3/5] NetStar: use generic flash driver   Ladislav Michl
• [U-Boot] Request to remove my email address from your email list   Chang Ming
• [U-Boot] Request to remove my email address from yourU_boot email list   Chang Ming
• [U-Boot] [PATCH 2/7] mtd: SPI Flash: Support the Spansion Flash   Hu Mingkai-B21284
• [U-Boot] [PATCH 3/7] eSPI: add eSPI controller support   Hu Mingkai-B21284
• [U-Boot] [PATCH 5/7] Make a special uboot used for booting from SDcard or SPI flash   Hu Mingkai-B21284
• [U-Boot] [PATCH 2/7] mtd: SPI Flash: Support the Spansion Flash   Hu Mingkai-B21284
• [U-Boot] [U-Boot-Users] Using UBoot with VxWorks   Antonio Mira
• [U-Boot] [PATCH] Add the "mfill" and "mcheck" memory commands.   Benoit Monin
• [U-Boot] [PATCH] ppc: Increase precision of ticks2usec   Benoit Monin
• [U-Boot] [PATCH] CONFIG_PRINT_TIME: Measuring boot time.   Benoit Monin
• [U-Boot] [PATCH] CONFIG_PRINT_TIME: Measuring boot time.   Benoit Monin
• [U-Boot] [PATCH] CONFIG_PRINT_TIME: Measuring boot time.   Benoit Monin
• [U-Boot] [PATCH] Add the "mfill" and "mcheck" memory commands.   Benoit Monin
• [U-Boot] [PATCH] ppc: Increase precision of ticks2usec   Benoit Monin
• [U-Boot] You have won 1.000.000.00. Euro   Mrs. Holt, Dillon S.
• [U-Boot] Porting u-boot to a custom fpga/ppc   NEAL, RYAN
• [U-Boot] U-Boot hangs after loading device tree   Afzal Nadirshah
• [U-Boot] U-Boot hangs after loading device tree   Afzal Nadirshah
• [U-Boot] FW: U-Boot hangs after loading device tree   Afzal Nadirshah
• [U-Boot] Creating partitions on NAND flash   Afzal Nadirshah
• [U-Boot] Creating partitions on NAND flash   Afzal Nadirshah
• [U-Boot] AT91: NAND OOB and ECC in U-Boot vs Linux (Jesus Alvarez)   Derek Ou
• [U-Boot] U-Boot Scripting suggestions to decrement counter in EEPROM. Alignment bug in itest on ARM.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] AT91SAM926x Nor Boot   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/9] at91sam9/cap9: use define instead hardcoded value for the USB_OHCI_REGS_BASE   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/9] AT91RM9200EK: fix broken boot from NOR flash   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/9] at91: rename DATAFLASH_MMC_SELECT to CONFIG_SYS_DATAFLASH_MMC_PIO   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 4/9] at91rm9200dk: Move conditional compilation to Makefile   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 5/9] Add support for the AT91RM9200EK Board.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 6/9] at91rm9200: move serial driver to drivers/serial   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 7/9] at91rm9200: fix DCC support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 8/9] at91sam9263ek add dcc support with at91sam9263ek_dcc_config   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 9/9] at91rm9200ek: add dcc support with at91rm9200ek_dcc_config   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] AT91 Pull Request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] Fix for running examples on OMAP3 EVM board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] example: introduce EXAMPLE_LOAD_ADDR   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] CONFIG_PRINT_TIME: Measuring boot time.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] CONFIG_PRINT_TIME: Measuring boot time.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] Fix for running examples on OMAP3 EVM board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Help on getting the AT91 u-boot patch   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] make MODEM SUPPORT generic instead of duplicate it   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/2] at91sam9: add watchdog support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 8/9] at91sam9263ek add dcc support with at91sam9263ek_dcc_config   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 7/9] at91rm9200: fix DCC support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 5/9] Add support for the AT91RM9200EK Board.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2] at91sam9263ek: active watchdog support via at91sam9263ek_wdt_config   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Seperate mtdpart command from jffs2   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Seperate mtdpart command from jffs2   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 7/9] at91rm9200: fix DCC support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 7/9] at91rm9200: fix DCC support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 7/9] at91rm9200: fix DCC support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Seperate mtdpart command from jffs2   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] U-boot debugger/emulator   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] U-boot debugger/emulator   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] U-boot debugger/emulator   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] U-boot debugger/emulator   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] Fix for NFS boot for OMAP3 EVM   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2] at91: change CONFIG_SYS_HZ to 1000   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 6/7 v2] OMAP3: Add OMAP3 core changes for MUSB   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] at91: Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] PXA Pull request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] ARM Pull Request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH V2] example/standalone: introduce STANDALONE_LOAD_ADDR   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH V2] example/standalone: introduce STANDALONE_LOAD_ADDR   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH V2] example/standalone: introduce STANDALONE_LOAD_ADDR   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH V2] example/standalone: introduce STANDALONE_LOAD_ADDR   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH V2] example/standalone: introduce STANDALONE_LOAD_ADDR   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/7] eSPI: add eSPI controller support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] AT91: NAND OOB and ECC in U-Boot vs Linux   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] mtd: add some at45 spi flash support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] CUSTODIANS: Urgent boarding call for flight 2009.03   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] CUSTODIANS: Urgent boarding call for flight 2009.03   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH for avr32/next] avr32: fix cacheflush.h location introducted by d8f2aa3298610b   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 0/1] AT91SAM9/CAP9: cleanup common code   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/7] at91sam9/at91cap: move common serial initialisation to cpu   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/7] at91sam9/at91cap: move common spi initialisation to cpu   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/7] at91sam9/at91cap: move common led management to cpu   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 4/7] at91sam9/at91cap: move common usb host initialisation to cpu   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 5/7] at91sam9/at91cap: move common macb initialisation to cpu   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 6/7] atmel/at91/boards: compile dataflash partition only when dataflash is   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 7/7] at91sam9/at91cap: move nand drivers to drivers/mtd/nand   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/2] cmc_pu2: fix misc_init_r prototype   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2] cmc_pu2: fix implicit declaration of function 'eth_setenv_enetaddr'   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Network AT91 AVR32: generic way of addressing USRIO register layout   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] CMC-PU2 compile fix   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH V2] OMAP3:Beagle: Enable mtdparts   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] ARM Pull Request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH V2] at91: Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] AT91 Pull Request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/2] LPC2468 support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/2] LPC2468 support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2] LPC2468 example board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH-ARM] S3C2440: Add support for Embest SBC2440-II Board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [Patch] soft_i2c.c compiler/linker error   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] at91sam9/at91cap: spi init wadd hardware chip select support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 01/13] s3c4510b: move specific code to soc directory   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 02/13] s3c44b0: move i2c driver to drivers/i2c   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 03/13] s3c44b0: move rtc driver to drivers/rtc   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 04/13] s3c44b0: move serial driver to drivers/serial   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 05/13] s3c44b0: extract cache from cpu.c   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 06/13] sa1100: move serial driver to drivers/serial   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 07/13] netarm: move serial driver to drivers/serial   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 08/13] imx31: move serial driver to drivers/serial   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 09/13] s3c64xx: move usb driver to drivers/usb   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 10/13] ks8695: move serial driver to drivers/serial   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 11/13] lpc2292: move serial driver to drivers/serial   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 12/13] arm720t/clps7111: move serial driver to drivers/serial   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 13/13] ompa3: remove duplicate interrupts code   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 01/13 V2] at91sam9/at91cap: spi init add hardware chip select support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 02/13 V2] at91sam9: add watchdog support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 03/13] at91: rename DATAFLASH_MMC_SELECT to CONFIG_DATAFLASH_MMC_SELECT   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 04/13] at91rm9200dk: Move conditional compilation to Makefile   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 05/13] add dataflash mmc mux missing support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 06/13] Add support for the AT91RM9200EK Board.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 07/13] at91rm9200: move serial driver to drivers/serial   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 08/13] at91rm9200: move serial shutdown code to serial drivers   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 09/13] at91rm9200: Reset update   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 10/13] at91: move usb driver to drivers/usb   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 11/13] at91: move dataflash spi driver to drivers/spi   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 12/13] at91: add hardware i2c drivers   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 13/13] at91sam9263ek: active hush and auto compelete support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/2] at91: Improved Atmel AT45DB081 dataflash support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 13/13] ompa3: remove duplicate interrupts code   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] cs8900 compile fix   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] OMAP3: Update Overo pin mux for new expansion board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH V2] OMAP: rename timer divisor   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 01/19] s3c4510b: move specific code to soc directory   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 02/19] s3c44b0: move i2c driver to drivers/i2c   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 03/19] s3c44b0: move rtc driver to drivers/rtc   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 04/19] s3c44b0: move serial driver to drivers/serial   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 05/19] s3c44b0: extract cache from cpu.c   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 06/19] sa1100: move serial driver to drivers/serial   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 07/19] netarm: move serial driver to drivers/serial   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 08/19] imx31: move serial driver to drivers/serial   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 09/19] s3c64xx: move usb driver to drivers/usb   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 10/19] ks8695: move serial driver to drivers/serial   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 11/19] lpc2292: move serial driver to drivers/serial   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 12/19] arm720t/clps7111: move serial driver to drivers/serial   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 13/19] omap3: remove duplicate interrupts code   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 14/19] imx: move serial driver to drivers/serial   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 15/19] davinci: move nand driver to drivers/mtd/nand   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 16/19] davinci: move i2c driver to drivers/i2c   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 17/19] s3c24x0: move serial driver to drivers/serial   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 18/19] s3c24x0: move i2c driver to drivers/i2c   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 19/19] s3c2410: move nand driver to drivers/mtd/nand   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] ARM Pull Request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] ARM Pull Request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] AT91 Pull Request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2] at91: Add support for esd MEESC board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 12/13] at91: add hardware i2c drivers   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 12/13] at91: add hardware i2c drivers   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 12/13] at91: add hardware i2c drivers   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] OMAP3: Update Overo pin mux for new expansion board   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] ARM Pull Request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] AT91 Pull Request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] ARM Pull Request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] ARM Pull Request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/3] arm: update co-processor 15 access   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/3] arm: clean cache management   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/3] arm: unify reset command   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] ARM Pull Request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Enabling ARM DCache (and MMU setup) in U-Boot   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] at91sam9/at91cap: improve clock framework   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] core ticks/timer code   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Add support for Faraday Ethernet IP FTMAC100   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] core ticks/timer code   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] core ticks/timer code   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Enabling ARM DCache (and MMU setup) in U-Boot   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Enabling ARM DCache (and MMU setup) in U-Boot   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/3] OMAP: use {read, write}l to access timer registers   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/3] OMAP: reindent timer code   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 10/13] at91: move usb driver to drivers/usb   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 09/13] s3c64xx: move usb driver to drivers/usb   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] OMAP3: Fix timer handling to 1ms and CONFIG_SYS_HZ to 1000.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] at91sam9/at91cap: improve clock framework   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] at91sam9/at91cap: improve clock framework   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 10/13] at91: move usb driver to drivers/usb   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Reduce OneNAND IPL common code (v3)   Kyungmin Park
• [U-Boot] [PATCH] Can build with only jffs2 cmdline support   Kyungmin Park
• [U-Boot] [PATCH] Seperate mtdpart command from jffs2   Kyungmin Park
• [U-Boot] [PATCH] Fix OneNAND ipl to read 256KB   Kyungmin Park
• [U-Boot] [PATCH] Seperate mtdpart command from jffs2   Kyungmin Park
• [U-Boot] Help on getting the AT91 u-boot patch   John Parten
• [U-Boot] Uboot NAND sub system and it's commands   Swapnali C. Patil
• [U-Boot] Uboot NAND sub system and it's commands   Swapnali C. Patil
• [U-Boot] U-Boot 1.1.6 and Marvell 88E1116 RGMII operations   Kim Phillips
• [U-Boot] U-boot with SMSC LAN8700   Kim Phillips
• [U-Boot] [PATCH v3] MPC8349ITX: several config issues fixed   Kim Phillips
• [U-Boot] [PATCH] 83xx: Fix some bugs in spd sdram code   Kim Phillips
• [U-Boot] [PATCH 7/7 v4] 8360, kmeter1: added bootcount feature.   Kim Phillips
• [U-Boot] Please pull u-boot-mpc83xx.git   Kim Phillips
• [U-Boot] [PATCH] SIMPC8313 board: fix out of tree building.   Kim Phillips
• [U-Boot] Please pull u-boot-mpc83xx   Kim Phillips
• [U-Boot] Please pull u-boot-mpc83xx.git   Kim Phillips
• [U-Boot] [PATCH v2] Support for PXA27X UDC.   Kim Phillips
• [U-Boot] [PATCH] 83xx: Fix some bugs in spd sdram code   Kim Phillips
• [U-Boot] Please pull u-boot-mpc83xx.git   Kim Phillips
• [U-Boot] u-boot for MPC8347   Kim Phillips
• [U-Boot] [PATCH] 83xx: correctly set encryption and I2C bus 0 clock   Kim Phillips
• [U-Boot] [PATCH 1/3] powerpc: common updates for keymile boards   Kim Phillips
• [U-Boot] [PATCH 2/3] 8xx, mgsuvd: rename board to a more generic name   Kim Phillips
• [U-Boot] [PATCH 2/3] 8xx, mgsuvd: rename board to a more generic name   Kim Phillips
• [U-Boot] [PATCH 1/3] powerpc: common updates for keymile boards   Kim Phillips
• [U-Boot] [PATCH] 83xx: correctly set encryption and I2C bus 0 clock   Kim Phillips
• [U-Boot] [PATCH] 83xx: correctly set encryption and I2C bus 0 clock   Kim Phillips
• [U-Boot] [PATCH v2] Add bank configuration to FSL spd_sdram.c   Kim Phillips
• [U-Boot] Please pull u-boot-mpc83xx.git   Kim Phillips
• [U-Boot] [PATCH 3/3] 83xx: Use common LSDMR defines from asm/fsl_lbc.h   Kim Phillips
• [U-Boot] [PATCH] rtc: remove broken rtc_read and rtc_write declarations   Kim Phillips
• [U-Boot] [PATCH] 8313erdb: Set guarded bit on BAT that covers the end of the address space.   Kim Phillips
• [U-Boot] [PATCH] mpc83xx: Set guarded bit on BAT that covers the end of the address space   Kim Phillips
• [U-Boot] U-Boot hangs after loading device tree   Pieter
• [U-Boot] Bad CPU identification on MPC8544DS   Pieter
• [U-Boot] [PATCH] added Vitesse VSC8211 definition to tsec.c   Pieter
• [U-Boot] [PATCH 1/1] Fix for NFS boot for OMAP3 EVM   Manikandan Pillai
• [U-Boot] [PATCH 1/1] Fix for running examples on OMAP3 EVM board   Manikandan Pillai
• [U-Boot] [PATCH 1/1] Changes for single binary image for u-boot for NAND/OneNAND flash.   Manikandan Pillai
• [U-Boot] [PATCH 1/1] Fix for running examples on OMAP3 EVM board   Pillai, Manikandan
• [U-Boot] [PATCH 1/1] Fix for running examples on OMAP3 EVM board   Pillai, Manikandan
• [U-Boot] [PATCH 1/1] Changes for single binary image for u-boot for NAND/OneNAND flash.   Pillai, Manikandan
• [U-Boot] [PATCH 1/1] Fix for running examples on OMAP3 EVM board   Manikandan Pillai
• [U-Boot] [PATCH 1/1] Changes for single binary image for u-boot for NAND/OneNAND flash.   Pillai, Manikandan
• [U-Boot] Issue with reset on MMC boot   Pillai, Manikandan
• [U-Boot] [PATCH 1/1] Changes for fixing the timer to 1 msec and   Manikandan Pillai
• [U-Boot] [PATCH 1/1] Changes for fixing the timer to 1 msec and   Pillai, Manikandan
• [U-Boot] [PATCH 1/1] Fix the timer to 1msec and CONFIG_SYS_HZ to 1000.   Manikandan Pillai
• [U-Boot] [PATCH 1/1] The GP timer is fixed for 1msec and CONFIG_SYS_HZ to 1000.   Manikandan Pillai
• [U-Boot] U-boot and JFFS2   Pillai, Manikandan
• [U-Boot] U-boot and JFFS2   Pillai, Manikandan
• [U-Boot] [PATCH 1/1] The GP timer is fixed for 1msec and CONFIG_SYS_HZ to 1000.   Pillai, Manikandan
• [U-Boot] U-boot and JFFS2   Pillai, Manikandan
• [U-Boot] [PATCH 1/2] Changes for auto detection of NAND or OneNAND flash on u-boot   Manikandan Pillai
• [U-Boot] [PATCH 2/2] NAND or OneNAND flash autodection changes for OMAP3 specific files   Manikandan Pillai
• [U-Boot] [PATCH] Add support for Faraday Ethernet IP FTMAC100   PoYu_Chuang
• [U-Boot] [PATCH] Add support for Faraday RTC IP FTRTC   PoYu_Chuang
• [U-Boot] Ethernet interface   Remco Poelstra
• [U-Boot] Problem booting Linux   Remco Poelstra
• [U-Boot] Problem booting Linux   Remco Poelstra
• [U-Boot] Cleaning up new port   Remco Poelstra
• [U-Boot] Cleaning up new port   Remco Poelstra
• [U-Boot] Generic MII interface   Remco Poelstra
• [U-Boot] [PATCH 1/1] LPC2468 support   Remco Poelstra
• [U-Boot] [PATCH 1/2] LPC2468 support   Remco Poelstra
• [U-Boot] [PATCH 2/2] LPC2468 example board   Remco Poelstra
• [U-Boot] [PATCH 1/2] LPC2468 support   Remco Poelstra
• [U-Boot] [PATCH 1/2] LPC2468 support   Remco Poelstra
• [U-Boot] [PATCH 1/2] LPC2468 support   Remco Poelstra
• [U-Boot] [PATCH 1/2] LPC2468 support   Remco Poelstra
• [U-Boot] [PATCH 1/2] LPC2468 support   Remco Poelstra
• [U-Boot] [PATCH 1/2] LPC2468 support   Remco Poelstra
• [U-Boot] [PATCH 2/2] LPC2468 example board   Remco Poelstra
• [U-Boot] [PATCH 1/2] LPC2468 support   Remco Poelstra
• [U-Boot] FW: U-Boot hangs after loading device tree   Aggrwal Poonam-B10812
• [U-Boot] PCI-E problems on Kilauea board   Felix Radensky
• [U-Boot] PCI-E problems on Kilauea board   Felix Radensky
• [U-Boot] PCI-E problems on Kilauea board   Felix Radensky
• [U-Boot] PCI-E problems on Kilauea board   Felix Radensky
• [U-Boot] PCI-E problems on Kilauea board   Felix Radensky
• [U-Boot] About PCI of U-BOOT of CANYONLANDS   Felix Radensky
• [U-Boot] About PCI of U-BOOT of CANYONLANDS   Felix Radensky
• [U-Boot] Vector set up in u-boot for OMAP3530.   Rahanesh
• [U-Boot] DeAsserting UART Interrupt line on OMAP3530 for uboot   Rahanesh
• [U-Boot] Display Sub SYstem Controller Initialization   Rahanesh
• [U-Boot] Watchdog timer and booting in Linux kernel   Sachin Rane
• [U-Boot] What to do for a working BIOSEMU and ATI_RADEON_FB environment?   Markus Rathgeb
• [U-Boot] What to do for a working BIOSEMU and ATI_RADEON_FB environment?   Markus Rathgeb
• [U-Boot] [PATCH v4] board support patch for phyCORE-MPC5200B-tiny   Markus Rathgeb
• [U-Boot] [PATCH v4] board support patch for phyCORE-MPC5200B-tiny   Markus Rathgeb
• [U-Boot] [PATCH v4] board support patch for phyCORE-MPC5200B-tiny   Markus Rathgeb
• [U-Boot] Directory of Nursing Homes, emergency medicine physicians, Alternative Medicine and more   Stafford Regina
• [U-Boot] Coldfire: MCF5271: Periodic HW watchdog petting and sleep function does not work.   Richard Retanubun
• [U-Boot] Coldfire: MCF5271: Periodic HW watchdog petting and sleep function does not work.   Richard Retanubun
• [U-Boot] [PATCH] CFI: geometry reversal for STMicro M29W320DT   Richard Retanubun
• [U-Boot] [PATCH] CFI: geometry reversal for STMicro M29W320DT   Richard Retanubun
• [U-Boot] [PATCH] Coldfire: I2C: Update I2CFDR frequency divider 0x0E value from 192 to 204   Richard Retanubun
• [U-Boot] [PATCH] Coldfire: I2C: Update I2CFDR frequency divider 0x0E value from 192 to 204   Richard Retanubun
• [U-Boot] [PATCH] CFI: geometry reversal for STMicro M29W320DT   Richard Retanubun
• [U-Boot] [PATCH] Coldire: mcf52x2: Improve gcc version detection   Richard Retanubun
• [U-Boot] Coldfire: MCF5270: Compiling u-boot 2009.03-rc2 with gcc 4.3.3 and binutils 2.19.1 results in a u-boot that fails relocation to RAM.   Richard Retanubun
• [U-Boot] Coldfire: MCF5271: Periodic HW watchdog petting and sleep function does not work.   Richard Retanubun
• [U-Boot] [PATCH] Coldire: mcf52x2: Improve gcc version detection   Richard Retanubun
• [U-Boot] [PATCH] Coldfire: interrupts: Add watchdog auto reset to dtimer_interrupt   Richard Retanubun
• [U-Boot] [PATCH] Coldfire: cleanup compiler warning for lib-m68k unused variables.   Richard Retanubun
• [U-Boot] [PATCH] Coldfire: I2C: Update I2CFDR frequency divider 0x0E value from 192 to 204   Richard Retanubun
• [U-Boot] [PATCH] Coldfire M5271: Activate u-boot system timer interrupt.   Richard Retanubun
• [U-Boot] Coldfire: MCF5271: Periodic HW watchdog petting and sleep function does not work.   Richard Retanubun
• [U-Boot] [GIT PULL] Please pull mpc5xxx tree   John Rigby
• [U-Boot] Fwd: [PATCH] MPC5200 FEC MII speed register   John Rigby
• [U-Boot] [GIT PULL] Please pull coldfire tree   John Rigby
• [U-Boot] At91 mass storage device   E Robertson
• [U-Boot] At91 mass storage device   E Robertson
• [U-Boot] At91 mass storage device   E Robertson
• [U-Boot] At91 mass storage device   E Robertson
• [U-Boot] CONFIG_SERVERIP   E Robertson
• [U-Boot] CONFIG_SERVERIP   E Robertson
• [U-Boot] PCI-E problems on Kilauea board   Stefan Roese
• [U-Boot] [PATCH] Seperate mtdpart command from jffs2   Stefan Roese
• [U-Boot] [PATCH] Seperate mtdpart command from jffs2   Stefan Roese
• [U-Boot] [PATCH] CFI: geometry reversal for STMicro M29W320DT   Stefan Roese
• [U-Boot] [PATCH] Seperate mtdpart command from jffs2   Stefan Roese
• [U-Boot] [PATCH] CFI: geometry reversal for STMicro M29W320DT   Stefan Roese
• [U-Boot] [PATCH] Seperate mtdpart command from jffs2   Stefan Roese
• [U-Boot] [PATCH] Seperate mtdpart command from jffs2   Stefan Roese
• [U-Boot] PCI-E problems on Kilauea board   Stefan Roese
• [U-Boot] PCI-E problems on Kilauea board   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: PMC440: Only use one CS (rank) in DDR2 configuration   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: lwmon5: Only use one CS (rank) in DDR2 configuration   Stefan Roese
• [U-Boot] [PATCH 1/8 v2] UBIFS: Implement read-only UBIFS support in U-Boot (Part 1)   Stefan Roese
• [U-Boot] [PATCH 2/8 v2] UBIFS: Implement read-only UBIFS support in U-Boot (Part 2)   Stefan Roese
• [U-Boot] [PATCH 3/8 v2] UBIFS: Implement read-only UBIFS support in U-Boot (Part 3)   Stefan Roese
• [U-Boot] [PATCH 4/8 v2] UBIFS: Implement read-only UBIFS support in U-Boot (Part 4)   Stefan Roese
• [U-Boot] [PATCH 5/8 v2] UBIFS: Implement read-only UBIFS support in U-Boot (Part 5)   Stefan Roese
• [U-Boot] [PATCH 6/8 v2] UBIFS: Implement read-only UBIFS support in U-Boot (Part 6)   Stefan Roese
• [U-Boot] [PATCH 7/8 v2] UBIFS: Implement read-only UBIFS support in U-Boot (Part 7)   Stefan Roese
• [U-Boot] [PATCH 8/8 v2] UBIFS: Implement read-only UBIFS support in U-Boot (Part 8)   Stefan Roese
• [U-Boot] [PATCH 1/1] Fix the timer to 1msec and CONFIG_SYS_HZ to 1000.   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx   Stefan Roese
• [U-Boot] About PCI of U-BOOT of CANYONLANDS   Stefan Roese
• [U-Boot] [PATCH v2] Separate mtdparts command from jffs2   Stefan Roese
• [U-Boot] About PCI of U-BOOT of CANYONLANDS   Stefan Roese
• [U-Boot] About PCI of U-BOOT of CANYONLANDS   Stefan Roese
• [U-Boot] About PCI of U-BOOT of CANYONLANDS   Stefan Roese
• [U-Boot] [PATCH] MTD: Change cfi-mtd to accept non-uniform sector sizes   Stefan Roese
• [U-Boot] [PATCH v2] Separate mtdparts command from jffs2   Stefan Roese
• [U-Boot] [PATCH 1/8 v2] UBIFS: Implement read-only UBIFS support in U-Boot (Part 1)   Stefan Roese
• [U-Boot] [PATCH v2] Separate mtdparts command from jffs2   Stefan Roese
• [U-Boot] [PATCH v4] Separate mtdparts command from jffs2   Stefan Roese
• [U-Boot] [PATCH] CFI: geometry reversal for STMicro M29W320DT   Stefan Roese
• [U-Boot] Please pull u-boot-cfi-flash   Stefan Roese
• [U-Boot] [PATCH 0/3 v3] UBIFS Support for U-Boot   Stefan Roese
• [U-Boot] [PATCH 1/3 v3] Add LZO decompressor support   Stefan Roese
• [U-Boot] [PATCH 2/3 v3] UBIFS: Implement read-only UBIFS support in U-Boot   Stefan Roese
• [U-Boot] [PATCH 3/3 v3] UBIFS: Add UBIFS commands   Stefan Roese
• [U-Boot] [PATCH v2] UBIFS: Missing offset relocation for compressor 'none'   Stefan Roese
• [U-Boot] [PATCH v2] UBIFS: Missing offset relocation for compressor 'none'   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Fix bug in PCI outbound map configuration for canyonlands   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx   Stefan Roese
• [U-Boot] [PATCH 2/3 v3] UBIFS: Implement read-only UBIFS support in U-Boot   Stefan Roese
• [U-Boot] [PATCH] Make flash protection work, when the environment is in EEPROM   Stefan Roese
• [U-Boot] Please pull u-boot-cfi-flash   Stefan Roese
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Stefan Roese
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Stefan Roese
• [U-Boot] [RFC] cfi_flash and complex address mapping   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Sequoia: Fix TLB reassignment in NAND booting code   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx   Stefan Roese
• [U-Boot] [PATCH] UBIFS: add R/O compatibility   Stefan Roese
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Stefan Roese
• [U-Boot] [PATCH 1/2] Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN   Alessandro Rubini
• [U-Boot] U-boot with SMSC LAN8700   Louis Ruch
• [U-Boot] MPC8315ERDB   Louis Ruch
• [U-Boot] MPC8315ERDB   Louis Ruch
• [U-Boot] MPC8315ERDB   Louis Ruch
• [U-Boot] MPC850: strange problem with icache   Guowen SHAN
• [U-Boot] MPC850: strange problem with icache   Guowen SHAN
• [U-Boot] Building u-boot on a PowerPC host   David Saada
• [U-Boot] Building u-boot on a PowerPC host   David Saada
• [U-Boot] [PATCH v2 1/4] Flex-OneNAND driver   Amul Kumar Saha
• [U-Boot] [PATCH v2 4/4] Flex-OneNAND boundary setting command   Amul Kumar Saha
• [U-Boot] [PATCH v2 4/4] Flex-OneNAND boundary setting command   Amul Kumar Saha
• [U-Boot] [PATCH v2 4/4] Flex-OneNAND boundary setting command   Amul Kumar Saha
• [U-Boot] [PATCH v2 4/4] Flex-OneNAND boundary setting command   Amul Kumar Saha
• [U-Boot] LXT972 issue on MPC8247: tx error   Sauce.Cheng
• [U-Boot] AT91SAM926x Nor Boot   Jens Scharsig
• [U-Boot] AT91SAM926x Nor Boot   Jens Scharsig
• [U-Boot] [Patch] soft_i2c.c compiler/linker error   Jens Scharsig
• [U-Boot] [Patch] soft_i2c.c compiler/linker error   Jens Scharsig
• [U-Boot] [Patch V2] soft_i2c.c compiler/linker error   Jens Scharsig
• [U-Boot] [Patch] soft_i2c.c compiler/linker error   Jens Scharsig
• [U-Boot] [Patch V2.1] soft_i2c.c compiler/linker error   Jens Scharsig
• [U-Boot] [PATCH] i2c, dtt: move dtt_init () to board_init_r ()   Heiko Schocher
• [U-Boot] Pull request: u-boot-i2c   Heiko Schocher
• [U-Boot] Dynamically sized CFI flash.   Heiko Schocher
• [U-Boot] [PATCH 0/3] powerpc: common updates for keymile boards   Heiko Schocher
• [U-Boot] [PATCH 1/3] powerpc: common updates for keymile boards   Heiko Schocher
• [U-Boot] [PATCH 2/3] 8xx, mgsuvd: rename board to a more generic name   Heiko Schocher
• [U-Boot] [PATCH 3/3] 8xx: add support for new keymile kmsupx4 board.   Heiko Schocher
• [U-Boot] [PATCH] 83xx: correctly set encryption and I2C bus 0 clock   Heiko Schocher
• [U-Boot] [PATCH 0/3] powerpc: common updates for keymile boards   Heiko Schocher
• [U-Boot] [PATCH 3/3] 8xx: add support for new keymile kmsupx4 board.   Heiko Schocher
• [U-Boot] [PATCH 1/3] powerpc: common updates for keymile boards   Heiko Schocher
• [U-Boot] [PATCH 0/6 v2] powerpc: common updates for keymile boards   Heiko Schocher
• [U-Boot] [PATCH 1/6 v2] 82xx, mgcoge: fix environment sector size   Heiko Schocher
• [U-Boot] [PATCH 2/6 v2] 8xx, icache: enabling ICache not before running from RAM   Heiko Schocher
• [U-Boot] [PATCH 3/6 v2] powerpc: common updates for keymile boards   Heiko Schocher
• [U-Boot] [PATCH 4/6 v2] 8xx, mgsuvd: Coding Style cleanup config file   Heiko Schocher
• [U-Boot] [PATCH 5/6 v2] 8xx, mgsuvd: rename board to a more generic name   Heiko Schocher
• [U-Boot] [PATCH 6/6 v2] 8xx: add support for new keymile kmsupx4 board.   Heiko Schocher
• [U-Boot] Multiple device support - none at all?   Heiko Schocher
• [U-Boot] Multiple device support - none at all?   Heiko Schocher
• [U-Boot] CUSTODIANS: Urgent boarding call for flight 2009.03   Heiko Schocher
• [U-Boot] [PATCH] Coldfire: I2C: Update I2CFDR frequency divider 0x0E value from 192 to 204   Heiko Schocher
• [U-Boot] i2c: rework multibus/multiadapter functionality   Heiko Schocher
• [U-Boot] [PATCH 1/3] mpc5200: do not use printf in i2c_init()   Heiko Schocher
• [U-Boot] [PATCH] ppc: cleanup compilererrors/warnings   Heiko Schocher
• [U-Boot] [PATCH] inka4x0: Add hardware diagnosis functions for inka4x0   Heiko Schocher
• [U-Boot] [PATCH] ppc: cleanup compilererrors/warnings   Heiko Schocher
• [U-Boot] [PATCH] inka4x0: Add hardware diagnosis functions for inka4x0   Heiko Schocher
• [U-Boot] [PATCH v2] ppc: cleanup compilererrors/warnings   Heiko Schocher
• [U-Boot] [PATCH] NetLoop initialization bug   Heiko Schocher
• [U-Boot] [Patch] soft_i2c.c compiler/linker error   Heiko Schocher
• [U-Boot] [Patch] soft_i2c.c compiler/linker error   Heiko Schocher
• [U-Boot] [PATCH 02/13] s3c44b0: move i2c driver to drivers/i2c   Heiko Schocher
• [U-Boot] [PATCH 12/13] at91: add hardware i2c drivers   Heiko Schocher
• [U-Boot] [PATCH 12/13] at91: add hardware i2c drivers   Heiko Schocher
• [U-Boot] [Patch V2] soft_i2c.c compiler/linker error   Heiko Schocher
• [U-Boot] [PATCH] NetLoop initialization bug   Heiko Schocher
• [U-Boot] [Patch V2.1] soft_i2c.c compiler/linker error   Heiko Schocher
• [U-Boot] Please pull u-boot-i2c.git   Heiko Schocher
• [U-Boot] FSL DDR @ 83xx   Andre Schwarz
• [U-Boot] AT91SAM926x Nor Boot   Robert Schwebel
• [U-Boot] [PATCH 1/2] Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN   Amit Kumar Sharma
• [U-Boot] [PATCH 1/2] Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN   Amit Kumar Sharma
• [U-Boot] [PATCH v2 1/2] sh: Add macros for SH-4A 32-Bit Address Extended Mode   Yoshihiro Shimoda
• [U-Boot] [PATCH v2 2/2] sh7785lcr: Add support 32-Bit Extended Address Mode   Yoshihiro Shimoda
• [U-Boot] CUSTODIANS: Urgent boarding call for flight 2009.03   Michal Simek
• [U-Boot] CUSTODIANS: Urgent boarding call for flight 2009.03   Haavard Skinnemoen
• [U-Boot] CUSTODIANS: Urgent boarding call for flight 2009.03   Haavard Skinnemoen
• [U-Boot] [PATCH for avr32/next] avr32: fix cacheflush.h location introducted by d8f2aa3298610b   Haavard Skinnemoen
• [U-Boot] [GIT PULL] AVR32 update   Haavard Skinnemoen
• [U-Boot] [PATCH] Network AT91 AVR32: generic way of addressing USRIO register layout   Haavard Skinnemoen
• [U-Boot] [PATCH] sf: drop DEBUG defines   Haavard Skinnemoen
• [U-Boot] [PATCH] sf: add driver for SST flashes   Haavard Skinnemoen
• [U-Boot] [PATCH] sf: stmicro: drop redundant id read   Haavard Skinnemoen
• [U-Boot] [PATCH] SF: always read 5 bytes for the idcode   Haavard Skinnemoen
• [U-Boot] sf patches   Haavard Skinnemoen
• [U-Boot] minicom garbled   SlinceArm
• [U-Boot] minicom garbled   SlinceArm
• [U-Boot] minicom garbled   SlinceArm
• [U-Boot] MII on mpc5200   Jon Smirl
• [U-Boot] Dynamically sized CFI flash.   Jon Smirl
• [U-Boot] Dynamically sized CFI flash.   Jon Smirl
• [U-Boot] CPU with USB host mode and a USB console   Jon Smirl
• [U-Boot] [PATCH] MPC5200 FEC MII speed register   Jon Smirl
• [U-Boot] Fwd: [PATCH] MPC5200 FEC MII speed register   Jon Smirl
• [U-Boot] Mirror to github   Jon Smirl
• [U-Boot] Mirror to github   Jon Smirl
• [U-Boot] Compiling api_examples/demo   Jon Smirl
• [U-Boot] Compiling api_examples/demo   Jon Smirl
• [U-Boot] [PATCH] Add define for mpc5200 CDM_CLK_ENA   Jon Smirl
• [U-Boot] [PATCH] board support patch for phyCORE-MPC5200B-tiny   Jon Smirl
• [U-Boot] [PATCH] Make flash protection work, when the environment is in EEPROM   Jon Smirl
• [U-Boot] [PATCH] Make flash protection work, when the environment is in EEPROM   Jon Smirl
• [U-Boot] [PATCH 1/3] mpc5200: do not use printf in i2c_init()   Jon Smirl
• [U-Boot] [PATCH 1/3] mpc5200: do not use printf in i2c_init()   Jon Smirl
• [U-Boot] [PATCH 3/3] mpc5200: make i2c faster   Jon Smirl
• [U-Boot] [PATCH 1/3] mpc5200: do not use printf in i2c_init()   Jon Smirl
• [U-Boot] [PATCH 1/3] mpc5200: do not use printf in i2c_init()   Jon Smirl
• [U-Boot] [PATCH 3/3] mpc5200: make i2c faster   Jon Smirl
• [U-Boot] [PATCH] Make flash protection work, when the environment is in EEPROM   Jon Smirl
• [U-Boot] [PATCH] board support patch for phyCORE-MPC5200B-tiny   Jon Smirl
• [U-Boot] [PATCH] board support patch for phyCORE-MPC5200B-tiny   Jon Smirl
• [U-Boot] [PATCH 2] board support patch for phyCORE-MPC5200B-tiny   Jon Smirl
• [U-Boot] [PATCH 2] board support patch for phyCORE-MPC5200B-tiny   Jon Smirl
• [U-Boot] [PATCH V3] board support patch for phyCORE-MPC5200B-tiny   Jon Smirl
• [U-Boot] [PATCH 2] board support patch for phyCORE-MPC5200B-tiny   Jon Smirl
• [U-Boot] [PATCH v4] board support patch for phyCORE-MPC5200B-tiny   Jon Smirl
• [U-Boot] [PATCH 2/3] mpc52xx phy: initialize only when needed   Jon Smirl
• [U-Boot] [PATCH v4] board support patch for phyCORE-MPC5200B-tiny   Jon Smirl
• [U-Boot] [PATCH 1/3] mpc5200: do not use printf in i2c_init()   Jon Smirl
• [U-Boot] Size of external u-boot commands   Jon Smirl
• [U-Boot] Size of external u-boot commands   Jon Smirl
• [U-Boot] Size of external u-boot commands   Jon Smirl
• [U-Boot] Size of external u-boot commands   Jon Smirl
• [U-Boot] Size of external u-boot commands   Jon Smirl
• [U-Boot] Size of external u-boot commands   Jon Smirl
• [U-Boot] Size of external u-boot commands   Jon Smirl
• [U-Boot] Size of external u-boot commands   Jon Smirl
• [U-Boot] Size of external u-boot commands   Jon Smirl
• [U-Boot] [PATCH v4] board support patch for phyCORE-MPC5200B-tiny   Jon Smirl
• [U-Boot] [PATCH v4] board support patch for phyCORE-MPC5200B-tiny   Jon Smirl
• [U-Boot] What to do for a working BIOSEMU and ATI_RADEON_FB environment?   Jon Smirl
• [U-Boot] What to do for a working BIOSEMU and ATI_RADEON_FB environment?   Jon Smirl
• [U-Boot] [PATCH v4] board support patch for phyCORE-MPC5200B-tiny   Jon Smirl
• [U-Boot] [PATCH v4] board support patch for phyCORE-MPC5200B-tiny   Jon Smirl
• [U-Boot] [PATCH V2] mpc5200: reduce delays in i2c   Jon Smirl
• [U-Boot] [PATCH 2/3] mpc52xx phy: initialize only when needed   Jon Smirl
• [U-Boot] [PATCH V2] mpc5200: reduce delays in i2c   Jon Smirl
• [U-Boot] [PATCH V3] mpc5200: reduce delays in i2c   Jon Smirl
• [U-Boot] compile uboot1.3.4 problem   John Smith
• [U-Boot] build u-boot and ubl for DM355   Vijay Soni
• [U-Boot] U-boot debugger/emulator   Frank Svendsbøe
• [U-Boot] U-boot debugger/emulator   Frank Svendsbøe
• [U-Boot] U-boot debugger/emulator   Frank Svendsbøe
• [U-Boot] [PATCH 2/3] MPC85xx: Load and enable QE microcode patch in IRAM   Timur Tabi
• [U-Boot] MPC8572E I2C bus speed after emulator reset   Timur Tabi
• [U-Boot] MPC8572E I2C bus speed after emulator reset   Timur Tabi
• [U-Boot] [PATCH] 83xx: Fix some bugs in spd sdram code   Joakim Tjernlund
• [U-Boot] USB EHCI driver   Michael Trimarchi
• [U-Boot] USB EHCI driver   Michael Trimarchi
• [U-Boot] USB EHCI driver   Michael Trimarchi
• [U-Boot] [PATCH 00/15] tools/Makefile cleanup and win32 tool support   Peter Tyser
• [U-Boot] [PATCH 01/15] tools/Makefile: Remove inappropriate double-tabs   Peter Tyser
• [U-Boot] [PATCH 02/15] tools/Makefile: Split variable declarations into multiple lines   Peter Tyser
• [U-Boot] [PATCH 03/15] tools/Makefile: Build bmp_logo only when LCD or VIDEO logos are enabled   Peter Tyser
• [U-Boot] [PATCH 04/15] tools/Makefile: Make img2srec dependent upon CONFIG_CMD_LOADS   Peter Tyser
• [U-Boot] [PATCH 05/15] tools/Makefile: Make ubsha1 dependent upon CONFIG_SHA1_CHECK_UB_IMG   Peter Tyser
• [U-Boot] [PATCH 06/15] tools/Makefile: Make inca-swap-bytes dependent on CONFIG_INCA_IP   Peter Tyser
• [U-Boot] [PATCH 07/15] tools/Makefile: Make envcrc dependent upon CONFIG_ENV_IS_EMBEDDED   Peter Tyser
• [U-Boot] [PATCH 08/15] tools/Makefile: Make gen_eth_addr dependent upon CONFIG_CMD_NET   Peter Tyser
• [U-Boot] [PATCH 09/15] tools/Makefile: Compile ncb when CONFIG_NETCONSOLE   Peter Tyser
• [U-Boot] [PATCH 10/15] gen_eth_addr: Use POSIX rand() and srand()   Peter Tyser
• [U-Boot] [PATCH 11/15] elf.h: Add missing int32_t typedef for WIN32 compilers   Peter Tyser
• [U-Boot] [PATCH 12/15] Add support for building native win32 tools   Peter Tyser
• [U-Boot] [PATCH 13/15] Makefile: Add removal of *.exe file to clean target   Peter Tyser
• [U-Boot] [PATCH 14/15] Deleted unused tools/Makefile.win32   Peter Tyser
• [U-Boot] [PATCH 15/15] common/Makefile: Conditionally compile env_embedded.o   Peter Tyser
• [U-Boot] [PATCH 03/15] tools/Makefile: Build bmp_logo only when LCD or VIDEO logos are enabled   Peter Tyser
• [U-Boot] [PATCH 11/15] elf.h: Add missing int32_t typedef for WIN32 compilers   Peter Tyser
• [U-Boot] [PATCH 12/15] Add support for building native win32 tools   Peter Tyser
• [U-Boot] [PATCH 1/1] Changes for fixing the timer to 1 msec and   Peter Tyser
• [U-Boot] [PATCH 00/26 v2] tools/Makefile cleanup and win32 tool support   Peter Tyser
• [U-Boot] [PATCH 01/26 v2] Makefile: Make autoconf.mk a dependency of the depend target   Peter Tyser
• [U-Boot] [PATCH 02/26 v2] Makefile: Add removal of *.exe files to clean target   Peter Tyser
• [U-Boot] [PATCH 03/26 v2] common/Makefile: Conditionally compile env_embedded.o   Peter Tyser
• [U-Boot] [PATCH 04/26 v2] elf.h: Use stdint.h to provide standard typedefs for WIN32   Peter Tyser
• [U-Boot] [PATCH 05/26 v2] gen_eth_addr: Use POSIX rand() and srand()   Peter Tyser
• [U-Boot] [PATCH 06/26 v2] tools/Makefile: Remove HOSTARCH HOSTOS defines   Peter Tyser
• [U-Boot] [PATCH 07/26 v2] tools/Makefile: Remove inappropriate double-tabs   Peter Tyser
• [U-Boot] [PATCH 08/26 v2] tools/Makefile: Split variable declarations into multiple lines   Peter Tyser
• [U-Boot] [PATCH 09/26 v2] tools/Makefile: Build bmp_logo only when LCD or VIDEO logos are enabled   Peter Tyser
• [U-Boot] [PATCH 10/26 v2] tools/Makefile: Make img2srec dependent upon CONFIG_CMD_LOADS   Peter Tyser
• [U-Boot] [PATCH 11/26 v2] tools/Makefile: Make ubsha1 dependent upon CONFIG_SHA1_CHECK_UB_IMG   Peter Tyser
• [U-Boot] [PATCH 12/26 v2] tools/Makefile: Make inca-swap-bytes dependent on CONFIG_INCA_IP   Peter Tyser
• [U-Boot] [PATCH 13/26 v2] tools/Makefile: Make envcrc dependent upon CONFIG_ENV_IS_EMBEDDED   Peter Tyser
• [U-Boot] [PATCH 14/26 v2] tools/Makefile: Make gen_eth_addr dependent upon CONFIG_CMD_NET   Peter Tyser
• [U-Boot] [PATCH 15/26 v2] tools/Makefile: Compile ncb when CONFIG_NETCONSOLE   Peter Tyser
• [U-Boot] [PATCH 16/26 v2] tools/Makefile: Add tools/ to the include search path   Peter Tyser
• [U-Boot] [PATCH 17/26 v2] tools/Makefile: Give precedence to U-Boot's include directory   Peter Tyser
• [U-Boot] [PATCH 18/26 v2] tools/Makefile: Add libfdt/ to the include search path   Peter Tyser
• [U-Boot] [PATCH 19/26 v2] tools/Makefile: Remove symlinks for fdt targets   Peter Tyser
• [U-Boot] [PATCH 20/26 v2] tools/Makefile: Dynamically generate libfdt object dependencies   Peter Tyser
• [U-Boot] [PATCH 21/26 v2] tools/Makefile: Remove symlinks for remaining source files   Peter Tyser
• [U-Boot] [PATCH 22/26 v2] tools/Makefile: Use auto-generated object file dependencies   Peter Tyser
• [U-Boot] [PATCH 23/26 v2] tools/Makefile: Create generic build rules   Peter Tyser
• [U-Boot] [PATCH 24/26 v2] tools/Makefile: Simplify HOST_CFLAGS/HOST_LDFLAGS generation   Peter Tyser
• [U-Boot] [PATCH 25/26 v2] Add support for building native win32 tools   Peter Tyser
• [U-Boot] [PATCH 26/26 v2] Delete now unused tools/Makefile.win32   Peter Tyser
• [U-Boot] [PATCH 01/26 v2] Makefile: Make autoconf.mk a dependency of the depend target   Peter Tyser
• [U-Boot] [PATCH 17/26 v2] tools/Makefile: Give precedence to U-Boot's include directory   Peter Tyser
• [U-Boot] [PATCH 17/26 v2] tools/Makefile: Give precedence to U-Boot's include directory   Peter Tyser
• [U-Boot] [PATCH/next v3 00/28] tools/Makefile cleanup and win32 tool support   Peter Tyser
• [U-Boot] [PATCH/next v3 01/28] Makefile: Make autoconf.mk a dependency of the depend target   Peter Tyser
• [U-Boot] [PATCH/next v3 02/28] Makefile: Add removal of *.exe files to clean target   Peter Tyser
• [U-Boot] [PATCH/next v3 03/28] common/Makefile: Conditionally compile env_embedded.o   Peter Tyser
• [U-Boot] [PATCH/next v3 04/28] elf.h: Use stdint.h to provide standard typedefs for WIN32   Peter Tyser
• [U-Boot] [PATCH/next v3 05/28] Rename include/zlib.h to include/u-boot/zlib.h   Peter Tyser
• [U-Boot] [PATCH/next v3 06/28] Rename include/bzlib.h to include/u-boot/bzlib.h   Peter Tyser
• [U-Boot] [PATCH/next v3 07/28] gen_eth_addr: Use POSIX rand() and srand()   Peter Tyser
• [U-Boot] [PATCH/next v3 08/28] tools/Makefile: Remove HOSTARCH HOSTOS defines   Peter Tyser
• [U-Boot] [PATCH/next v3 09/28] tools/Makefile: Remove inappropriate double-tabs   Peter Tyser
• [U-Boot] [PATCH/next v3 10/28] tools/Makefile: Split variable declarations into multiple lines   Peter Tyser
• [U-Boot] [PATCH/next v3 11/28] tools/Makefile: Build bmp_logo only when LCD or VIDEO logos are enabled   Peter Tyser
• [U-Boot] [PATCH/next v3 12/28] tools/Makefile: Make img2srec dependent upon CONFIG_CMD_LOADS   Peter Tyser
• [U-Boot] [PATCH/next v3 13/28] tools/Makefile: Make ubsha1 dependent upon CONFIG_SHA1_CHECK_UB_IMG   Peter Tyser
• [U-Boot] [PATCH/next v3 14/28] tools/Makefile: Make inca-swap-bytes dependent on CONFIG_INCA_IP   Peter Tyser
• [U-Boot] [PATCH/next v3 15/28] tools/Makefile: Make envcrc dependent upon CONFIG_ENV_IS_EMBEDDED   Peter Tyser
• [U-Boot] [PATCH/next v3 16/28] tools/Makefile: Make gen_eth_addr dependent upon CONFIG_CMD_NET   Peter Tyser
• [U-Boot] [PATCH/next v3 17/28] tools/Makefile: Compile ncb when CONFIG_NETCONSOLE   Peter Tyser
• [U-Boot] [PATCH/next v3 18/28] tools/Makefile: Add tools/ to the include search path   Peter Tyser
• [U-Boot] [PATCH/next v3 19/28] tools: Remove unecessary symlinking of zlib.h   Peter Tyser
• [U-Boot] [PATCH/next v3 20/28] tools/Makefile: Add libfdt/ to the include search path   Peter Tyser
• [U-Boot] [PATCH/next v3 21/28] tools/Makefile: Remove symlinks for fdt targets   Peter Tyser
• [U-Boot] [PATCH/next v3 22/28] tools/Makefile: Dynamically generate libfdt object dependencies   Peter Tyser
• [U-Boot] [PATCH/next v3 23/28] tools/Makefile: Remove symlinks for remaining source files   Peter Tyser
• [U-Boot] [PATCH/next v3 24/28] tools/Makefile: Use auto-generated object file dependencies   Peter Tyser
• [U-Boot] [PATCH/next v3 25/28] tools/Makefile: Create generic build rules   Peter Tyser
• [U-Boot] [PATCH/next v3 26/28] tools/Makefile: Simplify HOST_CFLAGS/HOST_LDFLAGS generation   Peter Tyser
• [U-Boot] [PATCH/next v3 27/28] Add support for building native win32 tools   Peter Tyser
• [U-Boot] [PATCH/next v3 28/28] Delete now unused tools/Makefile.win32   Peter Tyser
• [U-Boot] [PATCH/next v3 00/28] tools/Makefile cleanup and win32 tool support   Peter Tyser
• [U-Boot] [PATCH 17/26 v2] tools/Makefile: Give precedence to U-Boot's include directory   Peter Tyser
• [U-Boot] [PATCH 17/26 v2] tools/Makefile: Give precedence to U-Boot's include directory   Peter Tyser
• [U-Boot] [PATCH] drivers/net/tsec.c - mii_parse_sr does not wait for auto-negotiation completion bug fix   Peter Tyser
• [U-Boot] [PATCH] drivers/net/tsec.c - mii_parse_sr does not wait for auto-negotiation completion bug fix   Peter Tyser
• [U-Boot] [PATCH] Add "source" command; prepare removal of "autoscr" command   Peter Tyser
• [U-Boot] Help on getting the AT91 u-boot patch   Detlef Vollmann
• [U-Boot] Help on getting the AT91 u-boot patch   Detlef Vollmann
• [U-Boot] [PATCH v2] at91: change CONFIG_SYS_HZ to 1000   Detlef Vollmann
• [U-Boot] [PATCH] 8313erdb: Set guarded bit on BAT that covers the end of the address space.   Anton Vorontsov
• [U-Boot] [PATCH] 8313erdb: Set guarded bit on BAT that covers the end of the address space.   Anton Vorontsov
• [U-Boot] [PATCH 1/3] MPC85xx: Add MPC8569 CPU support   Haiying Wang
• [U-Boot] [PATCH 2/3] MPC85xx: Load and enable QE microcode patch in IRAM   Haiying Wang
• [U-Boot] [PATCH 3/3] MPC85xx: Add MPC8569MDS board support   Haiying Wang
• [U-Boot] [PATCH v2 1/3] MPC85xx: Add MPC8569 CPU support   Haiying Wang
• [U-Boot] [PATCH v2 3/3] MPC85xx: Add MPC8569MDS board support   Haiying Wang
• [U-Boot] ref:fail to include stdio.h   Paul Wang
• [U-Boot] [PATCH] at91: Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.   Ben Warren
• [U-Boot] [PATCH] at91: Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.   Ben Warren
• [U-Boot] [PATCH 1/1] Fix for NFS boot for OMAP3 EVM   Ben Warren
• [U-Boot] [PATCH 2/3] mpc52xx phy: initialize only when needed   Ben Warren
• [U-Boot] Help on getting the AT91 u-boot patch   Justin Waters
• [U-Boot] subscribe   Tim Whalen
• [U-Boot] ppc4xx: u-boot sees PCIe endpoint, linux does not.   Leon Woestenberg
• [U-Boot] 460GT PCIe configuration   Leon Woestenberg
• [U-Boot] Status open patches: NAND Flash   Scott Wood
• [U-Boot] Uboot NAND sub system and it's commands   Scott Wood
• [U-Boot] [PATCH] Reduce OneNAND IPL common code (v3)   Scott Wood
• [U-Boot] [PATCH 1/2] Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN   Scott Wood
• [U-Boot] [PATCH v2 1/4] Flex-OneNAND driver   Scott Wood
• [U-Boot] [PATCH v2 4/4] Flex-OneNAND boundary setting command   Scott Wood
• [U-Boot] [PATCH] 83xx: correctly set encryption and I2C bus 0 clock   Scott Wood
• [U-Boot] [PATCH 1/1] Fix JFFS2 NOR sector size routine   Scott Wood
• [U-Boot] [PATCH] Make nboot skip bad blocks   Scott Wood
• [U-Boot] [PATCH] common/image.c: Relocate strings in tables.   Scott Wood
• [U-Boot] [PATCH] 8313erdb: Set guarded bit on BAT that covers the end of the address space.   Scott Wood
• [U-Boot] [PATCH] NAND: Have nboot accept .e and .i as legacy no-ops.   Scott Wood
• [U-Boot] Pull request: nand flash   Scott Wood
• [U-Boot] [PATCH 2/5] NetStar: Fix NAND   Scott Wood
• [U-Boot] [PATCH/next v3 00/28] tools/Makefile cleanup and win32 tool support   Scott Wood
• [U-Boot] [PATCH] 8313erdb: Set guarded bit on BAT that covers the end of the address space.   Scott Wood
• [U-Boot] [PATCH] NAND: Have nboot accept .e and .i as legacy no-ops.   Scott Wood
• [U-Boot] [PATCH] 8313erdb: Set guarded bit on BAT that covers the end of the address space.   Scott Wood
• [U-Boot] [PATCH 2/5] NetStar: Fix NAND   Scott Wood
• [U-Boot] [PATCH] 8313erdb: Set guarded bit on BAT that covers the end of the address space.   Scott Wood
• [U-Boot] [PATCH] 8313erdb: Set guarded bit on BAT that covers the end of the address space.   Scott Wood
• [U-Boot] MMU/PPC question   Scott Wood
• [U-Boot] [PATCH 17/26 v2] tools/Makefile: Give precedence to U-Boot's include directory   Scott Wood
• [U-Boot] [PATCH 5/7] Make a special uboot used for booting from SDcard or SPI flash   Scott Wood
• [U-Boot] [PATCH 5/7] Make a special uboot used for booting from SDcard or SPI flash   Scott Wood
• [U-Boot] [PATCH 5/7] Make a special uboot used for booting from SDcard or SPI flash   Scott Wood
• [U-Boot] [PATCH v2 4/4] Flex-OneNAND boundary setting command   Scott Wood
• [U-Boot] [PATCH 1/2] Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN   Scott Wood
• [U-Boot] [PATCH 1/2] Changes for auto detection of NAND or OneNAND flash on u-boot   Scott Wood
• [U-Boot] [PATCH 2/2] NAND or OneNAND flash autodection changes for OMAP3 specific files   Scott Wood
• [U-Boot] Pull request: nand flash   Scott Wood
• [U-Boot] [PATCH 1/2] Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN   Scott Wood
• [U-Boot] [PATCH] inka4x0: Add hardware diagnosis functions for inka4x0   Scott Wood
• [U-Boot] [PATCH v2 4/4] Flex-OneNAND boundary setting command   Scott Wood
• [U-Boot] U-Boot's need for MMU   Scott Wood
• [U-Boot] [PATCH v2 4/7] rtc: add support for 4543 RTC (manufactured by e.g. EPSON)   Scott Wood
• [U-Boot] U-boot NAND boot on IMX31 3stack(ARM)   Scott Wood
• [U-Boot] [PATCH 1/2] Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN   Scott Wood
• [U-Boot] [PATCH 1/2] Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN   Scott Wood
• [U-Boot] U-boot NAND boot on IMX31 3stack(ARM)   Scott Wood
• [U-Boot] U-boot NAND boot on IMX31 3stack(ARM)   Scott Wood
• [U-Boot] U-boot NAND boot on IMX31 3stack(ARM)   Scott Wood
• [U-Boot] [PATCH] mpc83xx: Set guarded bit on BAT that covers the end of the address space   Scott Wood
• [U-Boot] core ticks/timer code   Scott Wood
• [U-Boot] core ticks/timer code   Scott Wood
• [U-Boot] JFFS2 scanning bug   Ilya Yanok
• [U-Boot] how to create a uboot for my board   Nelson Kon Yii
• [U-Boot] [PATCH] ap325rxa: Change the wait cycle in the area 5   Yusuke.Goda
• [U-Boot] [PATCH] NetLoop initialization bug   Michael Zaidman
• [U-Boot] [PATCH] drivers/net/tsec.c - mii_parse_sr does not wait for auto-negotiation completion bug fix   Michael Zaidman
• [U-Boot] [PATCH] drivers/net/tsec.c - mii_parse_sr does not wait for auto-negotiation completion bug fix   Michael Zaidman
• [U-Boot] [PATCH] drivers/net/tsec.c - mii_parse_sr does not wait for auto-negotiation completion bug fix   Michael Zaidman
• [U-Boot] [PATCH] NetLoop initialization bug   Michael Zaidman
• [U-Boot] [PATCH] NetLoop initialization bug   Michael Zaidman
• [U-Boot] [PATCH] NetLoop initialization bug   Michael Zaidman
• [PATCH] The patch fixes the bug of partial intialization of   Michael Zaidman
• [U-Boot] [PATCH] NetLoop initialization bug   Michael Zaidman
• [U-Boot] POST questions   Steven Zedeck
• [U-Boot] U-boot debugger/emulator   Steven Zedeck
• [U-Boot] U-boot debugger/emulator   Steven Zedeck
• [U-Boot] U-boot debugger/emulator   Steven Zedeck
• [U-Boot] U-boot debugger/emulator   Steven Zedeck
• [U-Boot] Adding a new device to my project   Steven Zedeck
• [U-Boot] U-Boot makefiles question   Steven Zedeck
• [U-Boot] Writing a SATA driver   Chris Ziomkowski
• [U-Boot] [PATCH] Fix AMCC Sequoia board DDR memory configuration   Mikhail Zolotaryov
• [U-Boot] 答复: tftp download with USB vitrual ethnet driver   Detlev Zundel
• [U-Boot] U-boot debugger/emulator   Detlev Zundel
• [U-Boot] Multiple device support - none at all?   Detlev Zundel
• [U-Boot] Multiple device support - none at all?   Detlev Zundel
• [U-Boot] [PATCH v2] UBIFS: Missing offset relocation for compressor 'none'   Detlev Zundel
• [U-Boot] [PATCH v1 0/7] Update for inka4x0 plus some new features   Detlev Zundel
• [U-Boot] [PATCH] command.c: Expose the core of do_help as _do_help to the rest of u-boot.   Detlev Zundel
• [U-Boot] [PATCH] mpc5xxx: Add structure definition for several more register blocks.   Detlev Zundel
• [U-Boot] [PATCH] drivers/twserial: Add protocol driver for "three wire serial" interface.   Detlev Zundel
• [U-Boot] [PATCH] rtc: add support for 4543 RTC (manufactured by e.g. EPSON)   Detlev Zundel
• [U-Boot] [PATCH] inka4x0: Add hardware diagnosis functions for inka4x0   Detlev Zundel
• [U-Boot] [PATCH] inka4x0: Add hardware diagnosis and RTC in configuration.   Detlev Zundel
• [U-Boot] [PATCH] inka4x0: Use proper accessor macros for memory mapped registers.   Detlev Zundel
• [U-Boot] [PATCH] inka4x0: Add hardware diagnosis functions for inka4x0   Detlev Zundel
• [U-Boot] [PATCH] inka4x0: Add hardware diagnosis and RTC in configuration.   Detlev Zundel
• [U-Boot] [PATCH] inka4x0: Add hardware diagnosis functions for inka4x0   Detlev Zundel
• [U-Boot] [PATCH] inka4x0: Add hardware diagnosis functions for inka4x0   Detlev Zundel
• [U-Boot] [PATCH] inka4x0: Add hardware diagnosis functions for inka4x0   Detlev Zundel
• [U-Boot] [PATCH v1 0/7] Update for inka4x0 plus some new features   Detlev Zundel
• [U-Boot] [PATCH] inka4x0: Add hardware diagnosis and RTC in configuration.   Detlev Zundel
• [U-Boot] [PATCH] drivers/twserial: Add protocol driver for "three wire serial" interface.   Detlev Zundel
• [U-Boot] [PATCH v2 0/7] Update for inka4x0 plus some new features   Detlev Zundel
• [U-Boot] [PATCH v2 1/7] command.c: Expose the core of do_help as _do_help to the rest of u-boot.   Detlev Zundel
• [U-Boot] [PATCH v2 2/7] mpc5xxx: Add structure definition for several more register blocks.   Detlev Zundel
• [U-Boot] [PATCH v2 3/7] drivers/twserial: Add protocol driver for "three wire serial" interface.   Detlev Zundel
• [U-Boot] [PATCH v2 4/7] rtc: add support for 4543 RTC (manufactured by e.g. EPSON)   Detlev Zundel
• [U-Boot] [PATCH v2 5/7] inka4x0: Add hardware diagnosis functions for inka4x0   Detlev Zundel
• [U-Boot] [PATCH v2 6/7] inka4x0: Add hardware diagnosis and RTC in configuration.   Detlev Zundel
• [U-Boot] [PATCH v2 7/7] inka4x0: Use proper accessor macros for memory mapped registers.   Detlev Zundel
• [U-Boot] [PATCH v2 0/7] Update for inka4x0 plus some new features   Detlev Zundel
• [U-Boot] Board Support for Quantum (Eurotech Ltd)   Detlev Zundel
• [U-Boot] [PATCH v2 3/7] drivers/twserial: Add protocol driver for "three wire serial" interface.   Detlev Zundel
• [U-Boot] [PATCH v2 3/7] drivers/twserial: Add protocol driver for "three wire serial" interface.   Detlev Zundel
• [U-Boot] [PATCH v2 3/7] drivers/twserial: Add protocol driver for "three wire serial" interface.   Detlev Zundel
• [U-Boot] Size of external u-boot commands   Detlev Zundel
• [U-Boot] [PATCH v2 4/7] rtc: add support for 4543 RTC (manufactured by e.g. EPSON)   Detlev Zundel
• [U-Boot] Size of external u-boot commands   Detlev Zundel
• [U-Boot] [PATCH v2 4/7] rtc: add support for 4543 RTC (manufactured by e.g. EPSON)   Detlev Zundel
• [U-Boot] [PATCH] MAINTAINERS: Keep list sorted.   Detlev Zundel
• [U-Boot] [PATCH] MAINTAINERS: Add entry for 'inka4x0' board.   Detlev Zundel
• [U-Boot] [PATCH v3 0/5] Update for inka4x0 plus some new features   Detlev Zundel
• [U-Boot] [PATCH v3 1/5] drivers/twserial: Add protocol driver for "three wire serial" interface.   Detlev Zundel
• [U-Boot] [PATCH v3 2/5] rtc: add support for 4543 RTC (manufactured by e.g. EPSON)   Detlev Zundel
• [U-Boot] [PATCH v3 3/5] inka4x0: Add hardware diagnosis functions for inka4x0   Detlev Zundel
• [U-Boot] [PATCH v3 4/5] inka4x0: Add hardware diagnosis and RTC in configuration.   Detlev Zundel
• [U-Boot] [PATCH v3 5/5] inka4x0: Use proper accessor macros for memory mapped registers.   Detlev Zundel
• [U-Boot] [PATCH] rtc: remove broken rtc_read and rtc_write declarations   Detlev Zundel
• [U-Boot] Out-of-tree build for imx31_phycore_eet fails   Detlev Zundel
• [U-Boot] [PATCH] NetLoop initialization bug   Detlev Zundel
• [U-Boot] [PATCH] Add "source" command; prepare removal of "autoscr" command   Detlev Zundel
• [U-Boot] Bad CPU identification on MPC8544DS   jeff angielski
• [U-Boot] Bad CPU identification on MPC8544DS   jeff angielski
• [U-Boot] [PATCH 1/2] Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN   apgmoorthy
• [U-Boot] [PATCH 1/2] Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN   apgmoorthy
• [U-Boot] [PATCH 1/2] Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN   apgmoorthy
• [U-Boot] AT91SAM926x Nor Boot   Ken.Fuchs at bench.com
• [U-Boot] How to create an ELF file which U-Boot understands and boots it   arun c
• [U-Boot] List of Chiropractors, infectious disease specialists, Pharmaceutical Companies and many more specialties   norplyhere at correio.favorit.com.br
• [U-Boot] [PATCH] SIMPC8313 board: fix out of tree building.   wd at denx.de
• [U-Boot] [PATCH] ads5121: enable instruction cache   wd at denx.de
• [U-Boot] [PATCH-ARM] S3C2440: Add support for Embest SBC2440-II Board   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] For Claims,Contact:   hiraku
• [U-Boot] [RFC] cfi_flash and complex address mapping   thomas.langer at infineon.com
• [U-Boot] [RFC] cfi_flash and complex address mapping   thomas.langer at infineon.com
• [U-Boot] Multiple device support - none at all?   ksi at koi8.net
• [U-Boot] Multiple device support - none at all?   ksi at koi8.net
• [U-Boot] Multiple device support - none at all?   ksi at koi8.net
• [U-Boot] Multiple device support - none at all?   ksi at koi8.net
• [U-Boot] Multiple device support - none at all?   ksi at koi8.net
• [U-Boot] Multiple device support - none at all?   ksi at koi8.net
• [U-Boot] How !, Adding a New Device to U-Boot.   renjith kumar
• [U-Boot] How !, Adding a New Device to U-Boot.   renjith kumar
• [U-Boot] How !, Adding a New Device to U-Boot.   renjith kumar
• [U-Boot] u-boot-2009.03 Hangs   renjith kumar
• [U-Boot] u-boot-2009.03 Hangs   renjith kumar
• [U-Boot] U-boot versions, DHCP difference   mcsattle
• [U-Boot] Is it possible let linux kernel use CONFIG_CMDLINE instead of u-boot passed ?   peter meng
• [U-Boot] JFFS2 scanning bug   mpfj-list at mimc.co.uk
• [U-Boot] How to Remove the padding bits from u-boot.bin   kuldeep nigam
• [U-Boot] How to create an ELF file which U-Boot understands and boots it   kuldeep nigam
• [U-Boot] Final Email Notification   once112009
• [U-Boot] Board Reset issue   rk1825
• [U-Boot] Board Reset issue   rk1825
• [U-Boot] how do you build u-boot under Windows XP SP2   cmfairfa at rockwellcollins.com
• [U-Boot] U-Boot's need for MMU   cmfairfa at rockwellcollins.com
• [U-Boot] Help with TSEC on MPC8343   rudresh
• [U-Boot] ethernet issue in MPC8313ER board   rudresh
• [U-Boot] Error: No NAND device found during Reset   rudresh
• [U-Boot] Error: No NAND device found during Reset   rudresh
• [U-Boot] Error: No NAND device found during Reset   rudresh
• [U-Boot] I2C1 is not working in U-boot, When I2C2 pins are config as GPIO in MPC8313 board   rudresh
• [U-Boot] U-Boot default parameters   canibek sağın
• [U-Boot] Different parameters, and messages on restart!!!!   canibek sağın
• [U-Boot] adding splashscreen   canibek sağın
• [U-Boot] adding splashscreen   canibek sağın
• [U-Boot] Is it possible to support interrupts in ARM without MMU in u-boot   akshay st
• [U-Boot] U-boot NAND boot on IMX31 3stack(ARM)   alfred steele
• [U-Boot] ARM based port for uboot with NAND boot support.   alfred steele
• [U-Boot] U-boot NAND boot on IMX31 3stack(ARM)   alfred steele
• [U-Boot] U-boot NAND boot on IMX31 3stack(ARM)   alfred steele
• [U-Boot] U-boot NAND boot on IMX31 3stack(ARM)   alfred steele
• [U-Boot] U-boot NAND boot on IMX31 3stack(ARM)   alfred steele
• [U-Boot] U-boot NAND boot on IMX31 3stack(ARM)   alfred steele
• [U-Boot] U-boot NAND boot on IMX31 3stack(ARM)   alfred steele
• [U-Boot] U-boot NAND boot on IMX31 3stack(ARM)   alfred steele
• [U-Boot] about s3c6410 and 256MB SDRAM   tommy.hong
• [U-Boot] How to get a interrupt in ARM in physical address space   akshay ts
• [U-Boot] fat32 cluster size check   twebb
• [U-Boot] 460GT PCIe configuration   vb
• [U-Boot] D e ntists Directory in the United States   woods
• [U-Boot] uboot-v2 NAND erase problem   景文林
• [U-Boot] question about uboot and mpc8548cds   阎淼
• [U-Boot] help with uboot-1.2 on mpc8548e   阎淼
• [U-Boot] tftp download with USB vitrual ethnet driver   龚益斌
• [U-Boot] 答复: tftp download with USB vitrual ethnet driver   龚益斌
• [U-Boot] 答复: 答复: tftp download with USB vitrual ethnet driver   龚益斌
• [U-Boot] 答复: tftp download with USB vitrual ethnet driver   龚益斌

Last message date: Tue Mar 31 23:55:34 CEST 2009
Archived on: Wed Apr 1 00:15:30 CEST 2009

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...