[U-Boot] u-boot for MPC8347

[Dave Jurasek]

Thank you.....

On Wed, Mar 11, 2009 at 10:48 AM, Kim Phillips
<kim.phillips at freescale.com>wrote:

> On Tue, 10 Mar 2009 22:12:00 -0700
> Dave Jurasek <dave at tyzx.com> wrote:
>
> > We are attempting to get Linux running on our embedded Intelligent Stereo
> > Camera that uses an MPC8347. We have previously used an MPC8347 in a
> product
> > with u-boot 1.1.6 and  Linux. Because we are now using a Marvell 88E1116
> as
> > the Ethernet "Phy", we were forced to use the newest u-boot (you
> > communicated with Ray Fogg previously on this). This has caused us
> problems
> > with booting our existing Linux kernel on the new board with the new
> u-boot.
> > In particular, a routine that used to exist in u-boot 1.1.6 (
> > "ft_get_prop()" in ".../cpu/mpc83xx/cpu.c") seems to have disappeared in
> the
> > new u-boot. Can you provide us any insight into where this functionality
> is
> > in the new u-boot, or any other help?
>
> the old CONFIG_OF_FLAT_TREE code has been deprecated by
> CONFIG_OF_LIBFDT code.  Most device tree fixup code now lies in
> common/fdt_support.c.
>
> Kim
>



-- 
Dave Jurasek
VP Hardware Engineering
Tyzx Inc.
7235 NW Evergreen Parkway, Suite 200
Hillsboro, Or 97106
tyzx.com
dave at tyzx.com
503-693-0863