[U-Boot] [PATCH 5/7] at91sam9/at91cap: move common macb initialisation to cpu
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Sun Mar 22 13:21:25 CET 2009
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
board/afeb9260/afeb9260.c | 23 +----------
board/atmel/at91cap9adk/at91cap9adk.c | 23 +----------
board/atmel/at91sam9260ek/at91sam9260ek.c | 32 +--------------
board/atmel/at91sam9263ek/at91sam9263ek.c | 23 +----------
cpu/arm926ejs/at91/Makefile | 3 +
cpu/arm926ejs/at91/at91cap9_macb.c | 54 ++++++++++++++++++++++++
cpu/arm926ejs/at91/at91sam9260_macb.c | 63 +++++++++++++++++++++++++++++
cpu/arm926ejs/at91/at91sam9263_macb.c | 54 ++++++++++++++++++++++++
include/asm-arm/arch-at91/at91_common.h | 1 +
9 files changed, 180 insertions(+), 96 deletions(-)
create mode 100644 cpu/arm926ejs/at91/at91cap9_macb.c
create mode 100644 cpu/arm926ejs/at91/at91sam9260_macb.c
create mode 100644 cpu/arm926ejs/at91/at91sam9263_macb.c
diff --git a/board/afeb9260/afeb9260.c b/board/afeb9260/afeb9260.c
index 0f9c504..ba60861 100644
--- a/board/afeb9260/afeb9260.c
+++ b/board/afeb9260/afeb9260.c
@@ -127,28 +127,7 @@ static void afeb9260_macb_hw_init(void)
pin_to_mask(AT91_PIN_PA28),
pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
- at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */
- at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */
- at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */
- at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */
- at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */
- at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */
- at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */
- at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */
- at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */
- at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */
-
-#ifndef CONFIG_RMII
- at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */
- at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */
- at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */
- at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */
- at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */
- at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */
- at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */
- at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */
-#endif
-
+ at91_macb_hw_init();
}
#endif
diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c
index b1e9c62..46a4fce 100644
--- a/board/atmel/at91cap9adk/at91cap9adk.c
+++ b/board/atmel/at91cap9adk/at91cap9adk.c
@@ -177,27 +177,8 @@ static void at91cap9_macb_hw_init(void)
pin_to_mask(AT91_PIN_PB26),
pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
- at91_set_A_periph(AT91_PIN_PB21, 0); /* ETXCK_EREFCK */
- at91_set_A_periph(AT91_PIN_PB22, 0); /* ERXDV */
- at91_set_A_periph(AT91_PIN_PB25, 0); /* ERX0 */
- at91_set_A_periph(AT91_PIN_PB26, 0); /* ERX1 */
- at91_set_A_periph(AT91_PIN_PB27, 0); /* ERXER */
- at91_set_A_periph(AT91_PIN_PB28, 0); /* ETXEN */
- at91_set_A_periph(AT91_PIN_PB23, 0); /* ETX0 */
- at91_set_A_periph(AT91_PIN_PB24, 0); /* ETX1 */
- at91_set_A_periph(AT91_PIN_PB30, 0); /* EMDIO */
- at91_set_A_periph(AT91_PIN_PB29, 0); /* EMDC */
-
-#ifndef CONFIG_RMII
- at91_set_B_periph(AT91_PIN_PC25, 0); /* ECRS */
- at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
- at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
- at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
- at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
- at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
- at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
- at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
-#endif
+ at91_macb_hw_init();
+
/* Unlock EMAC, 3 0 2 1 sequence */
#define MP_MAC_KEY0 0x5969cb2a
#define MP_MAC_KEY1 0xb4a1872e
diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c
index ad9dfeb..d89f247 100644
--- a/board/atmel/at91sam9260ek/at91sam9260ek.c
+++ b/board/atmel/at91sam9260ek/at91sam9260ek.c
@@ -132,37 +132,7 @@ static void at91sam9260ek_macb_hw_init(void)
pin_to_mask(AT91_PIN_PA28),
pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
- at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */
- at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */
- at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */
- at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */
- at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */
- at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */
- at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */
- at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */
- at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */
- at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */
-
-#ifndef CONFIG_RMII
- at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */
- at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */
- at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */
- at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */
- at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */
-#if defined(CONFIG_AT91SAM9260EK)
- /*
- * use PA10, PA11 for ETX2, ETX3.
- * PA23 and PA24 are for TWI EEPROM
- */
- at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */
- at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */
-#else
- at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */
- at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */
-#endif
- at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */
-#endif
-
+ at91_macb_hw_init();
}
#endif
diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c
index 59ace17..9110e9e 100644
--- a/board/atmel/at91sam9263ek/at91sam9263ek.c
+++ b/board/atmel/at91sam9263ek/at91sam9263ek.c
@@ -129,28 +129,7 @@ static void at91sam9263ek_macb_hw_init(void)
pin_to_mask(AT91_PIN_PE26),
pin_to_controller(AT91_PIN_PE0) + PIO_PUER);
- at91_set_A_periph(AT91_PIN_PE21, 0); /* ETXCK_EREFCK */
- at91_set_B_periph(AT91_PIN_PC25, 0); /* ERXDV */
- at91_set_A_periph(AT91_PIN_PE25, 0); /* ERX0 */
- at91_set_A_periph(AT91_PIN_PE26, 0); /* ERX1 */
- at91_set_A_periph(AT91_PIN_PE27, 0); /* ERXER */
- at91_set_A_periph(AT91_PIN_PE28, 0); /* ETXEN */
- at91_set_A_periph(AT91_PIN_PE23, 0); /* ETX0 */
- at91_set_A_periph(AT91_PIN_PE24, 0); /* ETX1 */
- at91_set_A_periph(AT91_PIN_PE30, 0); /* EMDIO */
- at91_set_A_periph(AT91_PIN_PE29, 0); /* EMDC */
-
-#ifndef CONFIG_RMII
- at91_set_A_periph(AT91_PIN_PE22, 0); /* ECRS */
- at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
- at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
- at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
- at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
- at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
- at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
- at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
-#endif
-
+ at91_macb_hw_init();
}
#endif
diff --git a/cpu/arm926ejs/at91/Makefile b/cpu/arm926ejs/at91/Makefile
index 1523199..db79c40 100644
--- a/cpu/arm926ejs/at91/Makefile
+++ b/cpu/arm926ejs/at91/Makefile
@@ -26,10 +26,12 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).a
ifdef CONFIG_AT91CAP9
+COBJS-$(CONFIG_MACB) += at91cap9_macb.o
COBJS-y += at91cap9_serial.o
COBJS-$(CONFIG_HAS_DATAFLASH) += at91cap9_spi.o
endif
ifdef CONFIG_AT91SAM9260
+COBJS-$(CONFIG_MACB) += at91sam9260_macb.o
COBJS-y += at91sam9260_serial.o
COBJS-$(CONFIG_HAS_DATAFLASH) += at91sam9260_spi.o
endif
@@ -38,6 +40,7 @@ COBJS-y += at91sam9261_serial.o
COBJS-$(CONFIG_HAS_DATAFLASH) += at91sam9261_spi.o
endif
ifdef CONFIG_AT91SAM9263
+COBJS-$(CONFIG_MACB) += at91sam9263_macb.o
COBJS-y += at91sam9263_serial.o
COBJS-$(CONFIG_HAS_DATAFLASH) += at91sam9263_spi.o
COBJS-$(CONFIG_USB_OHCI_NEW) += at91sam9263_usb.o
diff --git a/cpu/arm926ejs/at91/at91cap9_macb.c b/cpu/arm926ejs/at91/at91cap9_macb.c
new file mode 100644
index 0000000..5095d8d
--- /dev/null
+++ b/cpu/arm926ejs/at91/at91cap9_macb.c
@@ -0,0 +1,54 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop at leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+void at91_macb_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PB21, 0); /* ETXCK_EREFCK */
+ at91_set_A_periph(AT91_PIN_PB22, 0); /* ERXDV */
+ at91_set_A_periph(AT91_PIN_PB25, 0); /* ERX0 */
+ at91_set_A_periph(AT91_PIN_PB26, 0); /* ERX1 */
+ at91_set_A_periph(AT91_PIN_PB27, 0); /* ERXER */
+ at91_set_A_periph(AT91_PIN_PB28, 0); /* ETXEN */
+ at91_set_A_periph(AT91_PIN_PB23, 0); /* ETX0 */
+ at91_set_A_periph(AT91_PIN_PB24, 0); /* ETX1 */
+ at91_set_A_periph(AT91_PIN_PB30, 0); /* EMDIO */
+ at91_set_A_periph(AT91_PIN_PB29, 0); /* EMDC */
+
+#ifndef CONFIG_RMII
+ at91_set_B_periph(AT91_PIN_PC25, 0); /* ECRS */
+ at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
+ at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
+ at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
+ at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
+ at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
+ at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
+ at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
+#endif
+}
diff --git a/cpu/arm926ejs/at91/at91sam9260_macb.c b/cpu/arm926ejs/at91/at91sam9260_macb.c
new file mode 100644
index 0000000..ab60fb7
--- /dev/null
+++ b/cpu/arm926ejs/at91/at91sam9260_macb.c
@@ -0,0 +1,63 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop at leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+void at91_macb_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */
+ at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */
+ at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */
+ at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */
+ at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */
+ at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */
+ at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */
+ at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */
+ at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */
+ at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */
+
+#ifndef CONFIG_RMII
+ at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */
+ at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */
+ at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */
+ at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */
+ at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */
+#if defined(CONFIG_AT91SAM9260EK)
+ /*
+ * use PA10, PA11 for ETX2, ETX3.
+ * PA23 and PA24 are for TWI EEPROM
+ */
+ at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */
+ at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */
+#else
+ at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */
+ at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */
+#endif
+ at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */
+#endif
+}
diff --git a/cpu/arm926ejs/at91/at91sam9263_macb.c b/cpu/arm926ejs/at91/at91sam9263_macb.c
new file mode 100644
index 0000000..4223d37
--- /dev/null
+++ b/cpu/arm926ejs/at91/at91sam9263_macb.c
@@ -0,0 +1,54 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop at leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+void at91_macb_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PE21, 0); /* ETXCK_EREFCK */
+ at91_set_B_periph(AT91_PIN_PC25, 0); /* ERXDV */
+ at91_set_A_periph(AT91_PIN_PE25, 0); /* ERX0 */
+ at91_set_A_periph(AT91_PIN_PE26, 0); /* ERX1 */
+ at91_set_A_periph(AT91_PIN_PE27, 0); /* ERXER */
+ at91_set_A_periph(AT91_PIN_PE28, 0); /* ETXEN */
+ at91_set_A_periph(AT91_PIN_PE23, 0); /* ETX0 */
+ at91_set_A_periph(AT91_PIN_PE24, 0); /* ETX1 */
+ at91_set_A_periph(AT91_PIN_PE30, 0); /* EMDIO */
+ at91_set_A_periph(AT91_PIN_PE29, 0); /* EMDC */
+
+#ifndef CONFIG_RMII
+ at91_set_A_periph(AT91_PIN_PE22, 0); /* ECRS */
+ at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
+ at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
+ at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
+ at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
+ at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
+ at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
+ at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
+#endif
+}
diff --git a/include/asm-arm/arch-at91/at91_common.h b/include/asm-arm/arch-at91/at91_common.h
index 797854b..9c4e019 100644
--- a/include/asm-arm/arch-at91/at91_common.h
+++ b/include/asm-arm/arch-at91/at91_common.h
@@ -25,6 +25,7 @@
#ifndef AT91_COMMON_H
#define AT91_COMMON_H
+void at91_macb_hw_init(void);
void at91_serial_hw_init(void);
void at91_serial0_hw_init(void);
void at91_serial1_hw_init(void);
--
1.5.6.5
More information about the U-Boot
mailing list