[U-Boot] About PCI of U-BOOT of CANYONLANDS

[Stefan Roese]

On Wednesday 18 March 2009, Kazuaki Ichinohe wrote:
> U-boot version: u-boot-2009.01
> boot log is the following.
>
> U-Boot 2009.01 ( 3譛 18 2009 - 09:38:17)
>
> ・PU:   AMCC PowerPC 460EX Rev. A at 600 MHz (PLB=200, OPB=100, EBC=100 MHz)
>         Security/Kasumi support
>         Bootstrap Option H - Boot ROM Location I2C (Addr 0x52)
>         Internal PCI arbiter disabled
>         32 kB I-Cache 32 kB D-Cache
> Board: Canyonlands - AMCC PPC460EX Evaluation Board, 1*PCIe/1*SATA, Rev. 14
> I2C:   ready
> DTT:   1 is 38 C
> DRAM:  512 MB (ECC not enabled, 400 MHz, CL3)
> FLASH: 64 MB
> NAND:  128 MiB
> PCI:   Bus Dev VenId DevId Class Int
>          00  06  1002  5960  0300  ff
>          00  06  1002  5940  0380  ff
> PCIE1: link is not up.
> PCIE1: initialization as root-complex failed
> Video: ATI Radeon video card (1002, 5960) found @(0:6:0)
> Machine Check Exception.
> Caused by (from msr): regs 1fe3ac30 Data Read PLB Error
> NIP: 1FF82B10 XER: 00000000 LR: 1FF82AE8 REGS: 1fe3ac30 TRAP: 0200 DEAR:
> 70600027
> MSR: 00021000 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00

Anatolij, do you have any ideas what's going wrong here?

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================