[U-Boot] [PATCH 3/5] NetStar: use generic flash driver

Ladislav Michl ladis at linux-mips.org
Mon Mar 16 23:29:32 CET 2009


Use generic flash driver.

Signed-off-by: Ladislav Michl <ladis at linux-mips.org>

--- a/include/configs/netstar.h	2009-03-16 15:27:19.000000000 +0100
+++ b/include/configs/netstar.h	2009-03-16 15:28:18.000000000 +0100
@@ -59,16 +59,6 @@
 #define PHYS_SDRAM_1_SIZE	(64 * 1024 * 1024)
 #define PHYS_FLASH_1		0x00000000	/* Flash Bank #1 */
 
-/*
- * FLASH organization
- */
-#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-#define PHYS_FLASH_1_SIZE		(1 * 1024 * 1024)
-#define CONFIG_SYS_MAX_FLASH_SECT	19
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(5*CONFIG_SYS_HZ) /* in ticks */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(5*CONFIG_SYS_HZ)
-
 #define CONFIG_SYS_MONITOR_BASE		PHYS_FLASH_1
 #define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
 
@@ -106,6 +96,16 @@
 #define CONFIG_DRIVER_SMC91111
 #define CONFIG_SMC91111_BASE	0x04000300
 
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_MAX_FLASH_SECT	19
+
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#define CONFIG_FLASH_CFI_LEGACY
+#define CONFIG_SYS_FLASH_LEGACY_512Kx16
+
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x04000000 + (2 << 23)
 #define NAND_ALLOW_ERASE_ALL		1
--- a/board/netstar/netstar.c	2009-03-16 15:21:50.000000000 +0100
+++ b/board/netstar/netstar.c	2009-03-16 15:22:25.000000000 +0100
@@ -21,6 +21,7 @@
  */
 
 #include <common.h>
+#include <flash.h>
 #include <nand.h>
 
 #include <asm/io.h>
@@ -63,6 +64,19 @@
 	return 0;
 }
 
+#if defined(CONFIG_CMD_FLASH)
+ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t * info)
+{
+	if (banknum == 0) {	/* AM29LV800 boot flash */
+		info->portwidth = FLASH_CFI_16BIT;
+		info->chipwidth = FLASH_CFI_BY16;
+		info->interface = FLASH_CFI_X16;
+		return 1;
+	} else
+		return 0;
+}
+#endif
+
 #if defined(CONFIG_CMD_NAND)
 /*
  *	hardware specific access to control-lines
diff --git a/board/netstar/flash.c b/board/netstar/flash.c
deleted file mode 100644
index e9eca35..0000000
--- a/board/netstar/flash.c
+++ /dev/null
@@ -1,343 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu at sysgo.de>
- *
- * (C) Copyright 2005
- * 2N Telekomunikace, a.s. <www.2n.cz>
- * Ladislav Michl <michl at 2n.cz>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-/*#if 0 */
-#if (PHYS_SDRAM_1_SIZE != SZ_32M)
-
-#include "crcek.h"
-
-#if (CONFIG_SYS_MAX_FLASH_BANKS > 1)
-#error There is always only _one_ flash chip
-#endif
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-#define CMD_READ_ARRAY		0x000000f0
-#define CMD_UNLOCK1		0x000000aa
-#define CMD_UNLOCK2		0x00000055
-#define CMD_ERASE_SETUP		0x00000080
-#define CMD_ERASE_CONFIRM	0x00000030
-#define CMD_PROGRAM		0x000000a0
-#define CMD_UNLOCK_BYPASS	0x00000020
-
-#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00000555 << 1)))
-#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x000002aa << 1)))
-
-#define BIT_ERASE_DONE		0x00000080
-#define BIT_RDY_MASK		0x00000080
-#define BIT_PROGRAM_ERROR	0x00000020
-#define BIT_TIMEOUT		0x80000000	/* our flag */
-
-/*-----------------------------------------------------------------------
- */
-
-ulong flash_init(void)
-{
-	int i;
-
-	flash_info[0].flash_id = (AMD_MANUFACT & FLASH_VENDMASK) |
-				 (AMD_ID_LV800B & FLASH_TYPEMASK);
-	flash_info[0].size = PHYS_FLASH_1_SIZE;
-	flash_info[0].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-	memset(flash_info[0].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
-
-	for (i = 0; i < flash_info[0].sector_count; i++) {
-		switch (i) {
-		case 0: /* 16kB */
-			flash_info[0].start[0] = CONFIG_SYS_FLASH_BASE;
-			break;
-		case 1: /* 8kB */
-			flash_info[0].start[1] = CONFIG_SYS_FLASH_BASE + 0x4000;
-			break;
-		case 2: /* 8kB */
-			flash_info[0].start[2] = CONFIG_SYS_FLASH_BASE + 0x4000 +
-						 0x2000;
-			break;
-		case 3: /* 32 KB */
-			flash_info[0].start[3] = CONFIG_SYS_FLASH_BASE + 0x4000 +
-						 2 * 0x2000;
-			break;
-		case 4:
-			flash_info[0].start[4] = CONFIG_SYS_FLASH_BASE + 0x4000 +
-						 2 * 0x2000 + 0x8000;
-			break;
-		default: /* 64kB */
-			flash_info[0].start[i] = flash_info[0].start[i-1] +
-						 0x10000;
-			break;
-		}
-	}
-
-	/* U-Boot */
-	flash_protect(FLAG_PROTECT_SET,
-		      LOADER1_OFFSET,
-		      LOADER1_OFFSET + LOADER_SIZE - 1, flash_info);
-	/* Protect crcek, env and r_env as well */
-	flash_protect(FLAG_PROTECT_SET, 0, 0x8000 - 1, flash_info);
-
-	return flash_info[0].size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info(flash_info_t *info)
-{
-	int i;
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case (AMD_MANUFACT & FLASH_VENDMASK):
-		puts("AMD: ");
-		break;
-	default:
-		puts("Unknown vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case (AMD_ID_LV800B & FLASH_TYPEMASK):
-		puts("AM29LV800BB (8Mb)\n");
-		break;
-	default:
-		puts("Unknown chip type\n");
-		return;
-	}
-
-	printf("  Size: %ld MB in %d sectors\n",
-	       info->size >> 20, info->sector_count);
-
-	puts("  Sector start addresses:");
-	for (i = 0; i < info->sector_count; i++) {
-		if ((i % 5) == 0)
-			puts("\n   ");
-
-		printf(" %08lX%s", info->start[i],
-		       info->protect[i] ? " (RO)" : "     ");
-	}
-	puts("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase(flash_info_t *info, int s_first, int s_last)
-{
-	ushort result;
-	int prot, sect;
-	int rc = ERR_OK;
-
-	/* first look for protection bits */
-
-	if (info->flash_id == FLASH_UNKNOWN)
-		return ERR_UNKNOWN_FLASH_TYPE;
-
-	if ((s_first < 0) || (s_first > s_last))
-		return ERR_INVAL;
-
-	if ((info->flash_id & FLASH_VENDMASK) !=
-	    (AMD_MANUFACT & FLASH_VENDMASK))
-		return ERR_UNKNOWN_FLASH_VENDOR;
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect)
-		if (info->protect[sect])
-			prot++;
-
-	if (prot)
-		printf("- Warning: %d protected sectors will not be erased!\n",
-		       prot);
-	else
-		putc('\n');
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			vu_short *addr = (vu_short *) (info->start[sect]);
-
-			/* arm simple, non interrupt dependent timer */
-			reset_timer_masked();
-
-			MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-			MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-			MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
-
-			MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-			MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-			*addr = CMD_ERASE_CONFIRM;
-
-			/* wait until flash is ready */
-			while (1) {
-				result = *addr;
-
-				/* check timeout */
-				if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT) {
-					MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-					rc = ERR_TIMOUT;
-					break;
-				}
-
-				if ((result & 0xfff) & BIT_ERASE_DONE)
-					break;
-
-				if ((result & 0xffff) & BIT_PROGRAM_ERROR) {
-					rc = ERR_PROG_ERROR;
-					break;
-				}
-			}
-
-			MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-
-			if (rc != ERR_OK)
-				goto out;
-
-			putc('.');
-		}
-	}
-out:
-	/* allow flash to settle - wait 10 ms */
-	udelay_masked(10000);
-
-	return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-
-static int write_hword(flash_info_t *info, ulong dest, ushort data)
-{
-	vu_short *addr = (vu_short *) dest;
-	ushort result;
-	int rc = ERR_OK;
-
-	/* check if flash is (sufficiently) erased */
-	result = *addr;
-	if ((result & data) != data)
-		return ERR_NOT_ERASED;
-
-	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-	MEM_FLASH_ADDR1 = CMD_PROGRAM;
-	*addr = data;
-
-	/* arm simple, non interrupt dependent timer */
-	reset_timer_masked();
-
-	/* wait until flash is ready */
-	while (1) {
-		result = *addr;
-
-		/* check timeout */
-		if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			rc = ERR_TIMOUT;
-			break;
-		}
-
-		if ((result & 0x80) == (data & 0x80))
-			break;
-
-		if ((result & 0xffff) & BIT_PROGRAM_ERROR) {
-			result = *addr;
-
-			if ((result & 0x80) != (data & 0x80))
-				rc = ERR_PROG_ERROR;
-		}
-	}
-
-	*addr = CMD_READ_ARRAY;
-
-	if (*addr != data)
-		rc = ERR_PROG_ERROR;
-
-	return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp;
-	int l;
-	int i, rc;
-	ushort data;
-
-	wp = (addr & ~1);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i = 0, cp = wp; i < l; ++i, ++cp)
-			data = (data >> 8) | (*(uchar *) cp << 8);
-		for (; i < 2 && cnt > 0; ++i) {
-			data = (data >> 8) | (*src++ << 8);
-			--cnt;
-			++cp;
-		}
-		for (; cnt == 0 && i < 2; ++i, ++cp)
-			data = (data >> 8) | (*(uchar *) cp << 8);
-
-		if ((rc = write_hword(info, wp, data)) != 0)
-			return (rc);
-		wp += 2;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 2) {
-		data = *((vu_short *) src);
-		if ((rc = write_hword(info, wp, data)) != 0)
-			return (rc);
-		src += 2;
-		wp += 2;
-		cnt -= 2;
-	}
-
-	if (cnt == 0)
-		return ERR_OK;
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
-		data = (data >> 8) | (*src++ << 8);
-		--cnt;
-	}
-	for (; i < 2; ++i, ++cp)
-		data = (data >> 8) | (*(uchar *) cp << 8);
-
-	return write_hword(info, wp, data);
-}
-
-#endif
--- a/board/netstar/Makefile	2009-03-16 15:24:35.000000000 +0100
+++ b/board/netstar/Makefile	2009-03-16 15:24:47.000000000 +0100
@@ -28,7 +28,7 @@
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	:= netstar.o flash.o
+COBJS	:= netstar.o
 SOBJS	:= setup.o crcek.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c) eeprom.c \


More information about the U-Boot mailing list