[U-Boot] [PATCH v2 2/2] sh7785lcr: Add support 32-Bit Extended Address Mode
Yoshihiro Shimoda
shimoda.yoshihiro at renesas.com
Tue Mar 3 07:11:17 CET 2009
We can built 'make sh7785lcr_32bit_config'. And add new command "pmb"
for this mode. This command changes PMB for using 512MB system memory.
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro at renesas.com>
---
changelog:
[v2] Update README.sh7785lcr for 32-Bit Extended Address Mode
Makefile | 15 +++-
board/renesas/sh7785lcr/config.mk | 4 +
board/renesas/sh7785lcr/lowlevel_init.S | 94 ++++++++++++++++++++
board/renesas/sh7785lcr/sh7785lcr.c | 32 +++++++
board/renesas/sh7785lcr/u-boot.lds | 4 +-
.../renesas/sh7785lcr/{u-boot.lds => u-boot_29bit} | 0
.../renesas/sh7785lcr/{u-boot.lds => u-boot_32bit} | 4 +-
doc/README.sh7785lcr | 41 +++++++++
include/configs/sh7785lcr.h | 21 ++++-
9 files changed, 209 insertions(+), 6 deletions(-)
copy board/renesas/sh7785lcr/{u-boot.lds => u-boot_29bit} (100%)
copy board/renesas/sh7785lcr/{u-boot.lds => u-boot_32bit} (93%)
diff --git a/Makefile b/Makefile
index 3d0b986..e1ec906 100644
--- a/Makefile
+++ b/Makefile
@@ -3394,10 +3394,23 @@ sh7763rdp_config : unconfig
@echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas
+xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1))
+sh7785lcr_32bit_config \
sh7785lcr_config : unconfig
@ >include/config.h
@echo "#define CONFIG_SH7785LCR 1" >> include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7785lcr renesas
+ @if [ "$(findstring 32bit, $@)" ] ; then \
+ echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \
+ cp $(obj)board/renesas/sh7785lcr/u-boot_32bit \
+ $(obj)board/renesas/sh7785lcr/u-boot.lds ; \
+ echo "TEXT_BASE = 0x8ff80000" > \
+ $(obj)board/renesas/sh7785lcr/config.tmp ; \
+ $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \
+ else \
+ cp $(obj)board/renesas/sh7785lcr/u-boot_29bit \
+ $(obj)board/renesas/sh7785lcr/u-boot.lds ; \
+ fi
+ @$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas
ap325rxa_config : unconfig
@mkdir -p $(obj)include
diff --git a/board/renesas/sh7785lcr/config.mk b/board/renesas/sh7785lcr/config.mk
index 20807df..66d35cb 100644
--- a/board/renesas/sh7785lcr/config.mk
+++ b/board/renesas/sh7785lcr/config.mk
@@ -22,4 +22,8 @@
#
# NOTE: Must match value used in u-boot.lds (in this directory).
#
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+ifndef TEXT_BASE
TEXT_BASE = 0x0ff80000
+endif
diff --git a/board/renesas/sh7785lcr/lowlevel_init.S b/board/renesas/sh7785lcr/lowlevel_init.S
index f5ebeb9..97920df 100644
--- a/board/renesas/sh7785lcr/lowlevel_init.S
+++ b/board/renesas/sh7785lcr/lowlevel_init.S
@@ -130,6 +130,46 @@ lbsc_29bit:
write32 CS6WCR_A, CS_SD_WCR_D
lbsc_end:
+#if defined(CONFIG_SH_32BIT)
+ /*------- set PMB -------*/
+ write32 PASCR_A, PASCR_29BIT_D
+ write32 MMUCR_A, MMUCR_D
+
+ /*****************************************************************
+ * ent virt phys v sz c wt
+ * 0 0xa0000000 0x00000000 1 64M 0 0
+ * 1 0xa4000000 0x04000000 1 16M 0 0
+ * 2 0xa6000000 0x08000000 1 16M 0 0
+ * 9 0x88000000 0x48000000 1 128M 1 1
+ * 10 0x90000000 0x50000000 1 128M 1 1
+ * 11 0x98000000 0x58000000 1 128M 1 1
+ * 13 0xa8000000 0x48000000 1 128M 0 0
+ * 14 0xb0000000 0x50000000 1 128M 0 0
+ * 15 0xb8000000 0x58000000 1 128M 0 0
+ */
+ write32 PMB_ADDR_FLASH_A, PMB_ADDR_FLASH_D
+ write32 PMB_DATA_FLASH_A, PMB_DATA_FLASH_D
+ write32 PMB_ADDR_CPLD_A, PMB_ADDR_CPLD_D
+ write32 PMB_DATA_CPLD_A, PMB_DATA_CPLD_D
+ write32 PMB_ADDR_USB_A, PMB_ADDR_USB_D
+ write32 PMB_DATA_USB_A, PMB_DATA_USB_D
+ write32 PMB_ADDR_DDR_C1_A, PMB_ADDR_DDR_C1_D
+ write32 PMB_DATA_DDR_C1_A, PMB_DATA_DDR_C1_D
+ write32 PMB_ADDR_DDR_C2_A, PMB_ADDR_DDR_C2_D
+ write32 PMB_DATA_DDR_C2_A, PMB_DATA_DDR_C2_D
+ write32 PMB_ADDR_DDR_C3_A, PMB_ADDR_DDR_C3_D
+ write32 PMB_DATA_DDR_C3_A, PMB_DATA_DDR_C3_D
+ write32 PMB_ADDR_DDR_N1_A, PMB_ADDR_DDR_N1_D
+ write32 PMB_DATA_DDR_N1_A, PMB_DATA_DDR_N1_D
+ write32 PMB_ADDR_DDR_N2_A, PMB_ADDR_DDR_N2_D
+ write32 PMB_DATA_DDR_N2_A, PMB_DATA_DDR_N2_D
+ write32 PMB_ADDR_DDR_N3_A, PMB_ADDR_DDR_N3_D
+ write32 PMB_DATA_DDR_N3_A, PMB_DATA_DDR_N3_D
+
+ write32 PASCR_A, PASCR_INIT
+ mov.l DUMMY_ADDR, r0
+ icbi @r0
+#endif
write32 CCR_A, CCR_D
@@ -140,7 +180,11 @@ lbsc_end:
/*------- LBSC -------*/
MMSELR_A: .long 0xfc400020
+#if defined(CONFIG_SH_32BIT)
+MMSELR_D: .long 0xa5a50005
+#else
MMSELR_D: .long 0xa5a50002
+#endif
/*------- DBSC2 -------*/
#define DBSC2_BASE 0xfe800000
@@ -287,5 +331,55 @@ CS_SD_WCR_D: .long 0x00030108
CS_I2C_BCR_D: .long 0x11111100
CS_I2C_WCR_D: .long 0x00000003
+#if defined(CONFIG_SH_32BIT)
+/*------- set PMB -------*/
+PMB_ADDR_FLASH_A: .long PMB_ADDR_BASE(0)
+PMB_ADDR_CPLD_A: .long PMB_ADDR_BASE(1)
+PMB_ADDR_USB_A: .long PMB_ADDR_BASE(2)
+PMB_ADDR_DDR_C1_A: .long PMB_ADDR_BASE(9)
+PMB_ADDR_DDR_C2_A: .long PMB_ADDR_BASE(10)
+PMB_ADDR_DDR_C3_A: .long PMB_ADDR_BASE(11)
+PMB_ADDR_DDR_N1_A: .long PMB_ADDR_BASE(13)
+PMB_ADDR_DDR_N2_A: .long PMB_ADDR_BASE(14)
+PMB_ADDR_DDR_N3_A: .long PMB_ADDR_BASE(15)
+
+PMB_ADDR_FLASH_D: .long mk_pmb_addr_val(0xa0)
+PMB_ADDR_CPLD_D: .long mk_pmb_addr_val(0xa4)
+PMB_ADDR_USB_D: .long mk_pmb_addr_val(0xa6)
+PMB_ADDR_DDR_C1_D: .long mk_pmb_addr_val(0x88)
+PMB_ADDR_DDR_C2_D: .long mk_pmb_addr_val(0x90)
+PMB_ADDR_DDR_C3_D: .long mk_pmb_addr_val(0x98)
+PMB_ADDR_DDR_N1_D: .long mk_pmb_addr_val(0xa8)
+PMB_ADDR_DDR_N2_D: .long mk_pmb_addr_val(0xb0)
+PMB_ADDR_DDR_N3_D: .long mk_pmb_addr_val(0xb8)
+
+PMB_DATA_FLASH_A: .long PMB_DATA_BASE(0)
+PMB_DATA_CPLD_A: .long PMB_DATA_BASE(1)
+PMB_DATA_USB_A: .long PMB_DATA_BASE(2)
+PMB_DATA_DDR_C1_A: .long PMB_DATA_BASE(9)
+PMB_DATA_DDR_C2_A: .long PMB_DATA_BASE(10)
+PMB_DATA_DDR_C3_A: .long PMB_DATA_BASE(11)
+PMB_DATA_DDR_N1_A: .long PMB_DATA_BASE(13)
+PMB_DATA_DDR_N2_A: .long PMB_DATA_BASE(14)
+PMB_DATA_DDR_N3_A: .long PMB_DATA_BASE(15)
+
+/* ppn ub v s1 s0 c wt */
+PMB_DATA_FLASH_D: .long mk_pmb_data_val(0x00, 1, 1, 0, 1, 0, 1)
+PMB_DATA_CPLD_D: .long mk_pmb_data_val(0x04, 1, 1, 0, 0, 0, 1)
+PMB_DATA_USB_D: .long mk_pmb_data_val(0x08, 1, 1, 0, 0, 0, 1)
+PMB_DATA_DDR_C1_D: .long mk_pmb_data_val(0x48, 0, 1, 1, 0, 1, 1)
+PMB_DATA_DDR_C2_D: .long mk_pmb_data_val(0x50, 0, 1, 1, 0, 1, 1)
+PMB_DATA_DDR_C3_D: .long mk_pmb_data_val(0x58, 0, 1, 1, 0, 1, 1)
+PMB_DATA_DDR_N1_D: .long mk_pmb_data_val(0x48, 1, 1, 1, 0, 0, 1)
+PMB_DATA_DDR_N2_D: .long mk_pmb_data_val(0x50, 1, 1, 1, 0, 0, 1)
+PMB_DATA_DDR_N3_D: .long mk_pmb_data_val(0x58, 1, 1, 1, 0, 0, 1)
+
+DUMMY_ADDR: .long 0xa0000000
+PASCR_29BIT_D: .long 0x00000000
+PASCR_INIT: .long 0x80000080 /* check booting mode */
+MMUCR_A: .long 0xff000010
+MMUCR_D: .long 0x00000004 /* clear ITLB */
+#endif /* CONFIG_SH_32BIT */
+
CCR_A: .long 0xff00001c
CCR_D: .long 0x0000090b
diff --git a/board/renesas/sh7785lcr/sh7785lcr.c b/board/renesas/sh7785lcr/sh7785lcr.c
index 786c758..1d81688 100644
--- a/board/renesas/sh7785lcr/sh7785lcr.c
+++ b/board/renesas/sh7785lcr/sh7785lcr.c
@@ -54,3 +54,35 @@ int board_eth_init(bd_t *bis)
{
return pci_eth_init(bis);
}
+
+#if defined(CONFIG_SH_32BIT)
+int do_pmb(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ /* clear ITLB */
+ writel(0x00000004, 0xff000010);
+
+ /* delete PMB for peripheral */
+ writel(0, PMB_ADDR_BASE(0));
+ writel(0, PMB_DATA_BASE(0));
+ writel(0, PMB_ADDR_BASE(1));
+ writel(0, PMB_DATA_BASE(1));
+ writel(0, PMB_ADDR_BASE(2));
+ writel(0, PMB_DATA_BASE(2));
+
+ /* add PMB for SDRAM(0x40000000 - 0x47ffffff) */
+ writel(mk_pmb_addr_val(0x80), PMB_ADDR_BASE(8));
+ writel(mk_pmb_data_val(0x40, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(8));
+ writel(mk_pmb_addr_val(0xa0), PMB_ADDR_BASE(12));
+ writel(mk_pmb_data_val(0x40, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(12));
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ pmb, 1, 1, do_pmb,
+ "pmb - PMB setting\n",
+ "\n"
+ " - PMB setting for all SDRAM mapping\n"
+);
+#endif
+
diff --git a/board/renesas/sh7785lcr/u-boot.lds b/board/renesas/sh7785lcr/u-boot.lds
index 231769f..446fb93 100644
--- a/board/renesas/sh7785lcr/u-boot.lds
+++ b/board/renesas/sh7785lcr/u-boot.lds
@@ -1,7 +1,7 @@
/*
* Copyrigth (c) 2007
* Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
- * Copyrigth (c) 2008 Yoshihiro Shimoda <shimoda.yoshihiro at renesas.com>
+ * Copyrigth (c) 2008-2009 Yoshihiro Shimoda <shimoda.yoshihiro at renesas.com>
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -28,7 +28,7 @@ ENTRY(_start)
SECTIONS
{
- . = 0x08000000 + (128 * 1024 * 1024) - (512 * 1024);
+ . = 0x88000000 + (128 * 1024 * 1024) - (512 * 1024);
PROVIDE (reloc_dst = .);
diff --git a/board/renesas/sh7785lcr/u-boot.lds b/board/renesas/sh7785lcr/u-boot_29bit
similarity index 100%
copy from board/renesas/sh7785lcr/u-boot.lds
copy to board/renesas/sh7785lcr/u-boot_29bit
diff --git a/board/renesas/sh7785lcr/u-boot.lds b/board/renesas/sh7785lcr/u-boot_32bit
similarity index 93%
copy from board/renesas/sh7785lcr/u-boot.lds
copy to board/renesas/sh7785lcr/u-boot_32bit
index 231769f..446fb93 100644
--- a/board/renesas/sh7785lcr/u-boot.lds
+++ b/board/renesas/sh7785lcr/u-boot_32bit
@@ -1,7 +1,7 @@
/*
* Copyrigth (c) 2007
* Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
- * Copyrigth (c) 2008 Yoshihiro Shimoda <shimoda.yoshihiro at renesas.com>
+ * Copyrigth (c) 2008-2009 Yoshihiro Shimoda <shimoda.yoshihiro at renesas.com>
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -28,7 +28,7 @@ ENTRY(_start)
SECTIONS
{
- . = 0x08000000 + (128 * 1024 * 1024) - (512 * 1024);
+ . = 0x88000000 + (128 * 1024 * 1024) - (512 * 1024);
PROVIDE (reloc_dst = .);
diff --git a/doc/README.sh7785lcr b/doc/README.sh7785lcr
index c8d8ccd..c09c8d4 100644
--- a/doc/README.sh7785lcr
+++ b/doc/README.sh7785lcr
@@ -33,6 +33,38 @@ This board has 2 physical memory maps. It can be changed with DIP switch(S2-5).
0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use)
+configuration for This board:
+=============================
+
+You can choose configuration as follows:
+
+ - make sh7785lcr_config
+ - make sh7785lcr_32bit_config
+
+When you use "make sh7785lcr_config", there is build U-Boot for 29-bit
+address mode. This mode can use 128MB DDR-SDRAM.
+
+When you use "make sh7785lcr_32bit_config", there is build U-Boot for 32-bit
+extended address mode. This mode can use 384MB DDR-SDRAM. And if you run
+"pmb" command, this mode can use 512MB DDR-SDRAM.
+
+ * 32-bit extended address mode PMB mapping *
+ a) on start-up
+ virt | phys | size | device
+ -------------+---------------+---------------+---------------
+ 0x88000000 | 0x48000000 | 384MB | DDR-SDRAM (Cacheable)
+ 0xa0000000 | 0x00000000 | 64MB | NOR Flash
+ 0xa4000000 | 0x04000000 | 16MB | PLD
+ 0xa6000000 | 0x08000000 | 16MB | USB
+ 0xa8000000 | 0x48000000 | 384MB | DDR-SDRAM (Non-cacheable)
+
+ b) after "pmb" command
+ virt | phys | size | device
+ -------------+---------------+---------------+---------------
+ 0x80000000 | 0x40000000 | 512MB | DDR-SDRAM (Cacheable)
+ 0xa0000000 | 0x40000000 | 512MB | DDR-SDRAM (Non-cacheable)
+
+
This board specific command:
============================
@@ -41,6 +73,7 @@ This board has the following its specific command:
- hwtest
- printmac
- setmac
+ - pmb (sh7785lcr_32bit_config only)
1. hwtest
@@ -80,3 +113,11 @@ This command writes MAC address of this board.
i.e)
=> setmac 00:00:87:**:**:**
+
+
+4. pmb
+
+This command change PMB for DDR-SDRAM all mapping. However you cannot use
+NOR Flash and USB Host on U-Boot when you run this command.
+i.e)
+=> pmb
diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h
index 94c8d6b..21c3f70 100644
--- a/include/configs/sh7785lcr.h
+++ b/include/configs/sh7785lcr.h
@@ -61,11 +61,20 @@
#undef CONFIG_SHOW_BOOT_PROGRESS
/* MEMORY */
+#if defined(CONFIG_SH_32BIT)
+#define SH7785LCR_SDRAM_PHYS_BASE (0x48000000)
+#define SH7785LCR_SDRAM_BASE (0x88000000)
+#define SH7785LCR_SDRAM_SIZE (384 * 1024 * 1024)
+#define SH7785LCR_FLASH_BASE_1 (0xa0000000)
+#define SH7785LCR_FLASH_BANK_SIZE (64 * 1024 * 1024)
+#define SH7785LCR_USB_BASE (0xa6000000)
+#else
#define SH7785LCR_SDRAM_BASE (0x08000000)
#define SH7785LCR_SDRAM_SIZE (128 * 1024 * 1024)
#define SH7785LCR_FLASH_BASE_1 (0xa0000000)
#define SH7785LCR_FLASH_BANK_SIZE (64 * 1024 * 1024)
#define SH7785LCR_USB_BASE (0xb4000000)
+#endif
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_PROMPT "=> "
@@ -133,9 +142,15 @@
#define CONFIG_PCI
#define CONFIG_SH4_PCI
#define CONFIG_SH7780_PCI
+#if defined(CONFIG_SH_32BIT)
+#define CONFIG_SH7780_PCI_LSR 0x1ff00001
+#define CONFIG_SH7780_PCI_LAR 0x5f000000
+#define CONFIG_SH7780_PCI_BAR 0x5f000000
+#else
#define CONFIG_SH7780_PCI_LSR 0x07f00001
#define CONFIG_SH7780_PCI_LAR CONFIG_SYS_SDRAM_SIZE
#define CONFIG_SH7780_PCI_BAR CONFIG_SYS_SDRAM_SIZE
+#endif
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW 1
@@ -147,8 +162,12 @@
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
#define CONFIG_PCI_IO_SIZE 0x00200000 /* Size of IO window */
-#define CONFIG_PCI_SYS_BUS CONFIG_SYS_SDRAM_BASE
+#if defined(CONFIG_SH_32BIT)
+#define CONFIG_PCI_SYS_PHYS SH7785LCR_SDRAM_PHYS_BASE
+#else
#define CONFIG_PCI_SYS_PHYS CONFIG_SYS_SDRAM_BASE
+#endif
+#define CONFIG_PCI_SYS_BUS CONFIG_SYS_SDRAM_BASE
#define CONFIG_PCI_SYS_SIZE CONFIG_SYS_SDRAM_SIZE
/* Network device (RTL8169) support */
--
1.5.5
More information about the U-Boot
mailing list