[U-Boot] [PATCH 2/3] 8xx, mgsuvd: rename board to a more generic name

Wolfgang Denk wd at denx.de
Wed Mar 11 12:43:37 CET 2009


Dear Heiko Schocher,

In message <49B7709D.4080209 at denx.de> you wrote:
> renaming the "mgsuvd" board port into "km8xx", because
> there come more similar boards from keymile.
> Compiling the mgsuvd board with "make mgsuvd_config"
> remains.
> 
> Signed-off-by: Heiko Schocher <hs at denx.de>

Parts of this change are also mixed in into the next patch ([PATCH
3/3] 8xx: add support for new keymile kmsupx4 board) - please clean
up.

...
> new file mode 100644
> index 0000000..1cb7756
> --- /dev/null
> +++ b/include/configs/km8xx.h
...
> +#define CONFIG_MPC866		1	/* This is a MPC866 CPU		*/

Line length.

> +#define CONFIG_SYS_CPM_BOOTCOUNT_ADDR	0x1eb0	/* In case of SMC relocation, the
> +					 * default value is not working */

Line length.

> +#define	CONFIG_TIMESTAMP		/* but print image timestmps	*/

Line length.

> +#define CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
> +#define CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
> +#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)

Line length.

> +#define CONFIG_SYS_MONITOR_LEN		(384 << 10)	/* Reserve 384 kB for Monitor	*/
> +#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
> +#define CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc()	*/

Line length.

and so on.


Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Sometimes a man will tell his bartender things he'll never tell his doctor.
	-- Dr. Phillip Boyce, "The Menagerie" ("The Cage"),
	   stardate unknown.


More information about the U-Boot mailing list