[U-Boot] [PATCH 1/2] Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN

apgmoorthy moorthy.apg at samsung.com
Mon Mar 23 10:02:20 CET 2009


Hi Scott, 

>> +	if (page < 2 && (onenand_readw(THIS_ONENAND(ONENAND_SPARERAM)) != 0xffff))

 >Line length.

     - Corrected.
      
>>  	int pagesize = ONENAND_PAGE_SIZE;
>> +	int nblocks = CONFIG_SYS_MONITOR_LEN / ONENAND_BLOCK_SIZE;

 >Shouldn't nblocks be rounded up?

>>  		pagesize <<= 1;
>> +		nblocks = (nblocks + 1) >> 1;
>> +	}

 >Hmm, might be clearer to just do this:

>if (onenand_readw(THIS_ONENAND(ONENAND_REG_TECHNOLOGY))) {
>	pagesize = 4096;
>	pageshift = 12;
>} else {
>	pagesize = 2048;
>	pageshift = 11;
>}

>nblocks = (CONFIG_SYS_MONITOR_LEN + pagesize - 1) >> pageshift;

       - Right , But the above line dosent give the nblocks ,
         used erasesize and erase_shift.


>ONENAND_PAGE_SIZE as a constant should go away since it's not always
>true.

        - Removed it.

>> +	for (; block < nblocks; block++) {
>> +		for (; page < ONENAND_PAGES_PER_BLOCK; page++) {
>> +			if (onenand_read_page(block, page, buf + offset, pagesize)) {
>> +				/* This block is bad. Skip it and read next block */
>> +				nblocks++;
>> +				break;
>> +			}
>> +			offset += pagesize;

>If you find a bad block marker in the second page of a block, shouldn't
>you rewind offset to the beginning of the block?

       - Correct , have reverted back.

>BTW, if we're going to have "onenand_readw" and "onenand_writew"
>wrappers, can we make them useful by combining them with THIS_ONENAND?

       - Corrected , Now onenand_readw/onenand_writew conatins THIS_ONENAND.

Please do find the updated patch below.

With Regards
  Moorthy


Currently OneNAND initial program loader (ipl) reads only block 0 ie 128KB.
However, u-boot image for apollon board is 195KB making the board
unbootable with OneNAND.

Fix ipl to read CONFIG_SYS_MONITOR_LEN.
CONFIG_SYS_MONITOR_LEN macro holds the U-Boot image size.

Signed-off-by: Gangheyamoorthy   <moorthy.apg at samsung.com>
Signed-off-by: Rohit Hagargundgi <h.rohit at samsung.com>
---
 
diff --git a/onenand_ipl/onenand_boot.c b/onenand_ipl/onenand_boot.c
index 86428cc..63995ce 100644
--- a/onenand_ipl/onenand_boot.c
+++ b/onenand_ipl/onenand_boot.c
@@ -36,7 +36,7 @@ void start_oneboot(void)
 
 	buf = (uchar *) CONFIG_SYS_LOAD_ADDR;
 
-	onenand_read_block0(buf);
+	onenand_read_block(buf);
 
 	((init_fnc_t *)CONFIG_SYS_LOAD_ADDR)();
 
diff --git a/onenand_ipl/onenand_ipl.h b/onenand_ipl/onenand_ipl.h
index c5a722d..412572a 100644
--- a/onenand_ipl/onenand_ipl.h
+++ b/onenand_ipl/onenand_ipl.h
@@ -31,5 +31,5 @@
 #define READ_INTERRUPT()                                                \
 	onenand_readw(THIS_ONENAND(ONENAND_REG_INTERRUPT))
 
-extern int onenand_read_block0(unsigned char *buf);
+extern int onenand_read_block(unsigned char *buf);
 #endif
diff --git a/onenand_ipl/onenand_read.c b/onenand_ipl/onenand_read.c
index 6d04943..7415c7f 100644
--- a/onenand_ipl/onenand_read.c
+++ b/onenand_ipl/onenand_read.c
@@ -49,20 +49,20 @@ static inline int onenand_read_page(ulong block, ulong page,
 #endif
 
 	onenand_writew(onenand_block_address(block),
-		THIS_ONENAND(ONENAND_REG_START_ADDRESS1));
+			ONENAND_REG_START_ADDRESS1);
 
 	onenand_writew(onenand_bufferram_address(block),
-		THIS_ONENAND(ONENAND_REG_START_ADDRESS2));
+			ONENAND_REG_START_ADDRESS2);
 
 	onenand_writew(onenand_sector_address(page),
-		THIS_ONENAND(ONENAND_REG_START_ADDRESS8));
+			ONENAND_REG_START_ADDRESS8);
 
 	onenand_writew(onenand_buffer_address(),
-		THIS_ONENAND(ONENAND_REG_START_BUFFER));
+			ONENAND_REG_START_BUFFER);
 
-	onenand_writew(ONENAND_INT_CLEAR, THIS_ONENAND(ONENAND_REG_INTERRUPT));
+	onenand_writew(ONENAND_INT_CLEAR, ONENAND_REG_INTERRUPT);
 
-	onenand_writew(ONENAND_CMD_READ, THIS_ONENAND(ONENAND_REG_COMMAND));
+	onenand_writew(ONENAND_CMD_READ, ONENAND_REG_COMMAND);
 
 #ifndef __HAVE_ARCH_MEMCPY32
 	p = (unsigned long *) buf;
@@ -72,6 +72,10 @@ static inline int onenand_read_page(ulong block, ulong page,
 	while (!(READ_INTERRUPT() & ONENAND_INT_READ))
 		continue;
 
+	/* Check for invalid block mark */
+	if (page < 2 && (onenand_readw(ONENAND_SPARERAM) != 0xffff))
+		return 1;
+
 #ifdef __HAVE_ARCH_MEMCPY32
 	/* 32 bytes boundary memory copy */
 	memcpy32(buf, base, pagesize);
@@ -89,25 +93,39 @@ static inline int onenand_read_page(ulong block, ulong page,
 #define ONENAND_PAGES_PER_BLOCK		64
 
 /**
- * onenand_read_block - Read a block data to buf
+ * onenand_read_block - Read First 'n' consecutive Good blocks holding 
+ *                      data to buf
  * @return 0 on success
  */
-int onenand_read_block0(unsigned char *buf)
+int onenand_read_block(unsigned char *buf)
 {
-	int page, offset = 0;
-	int pagesize = ONENAND_PAGE_SIZE;
-
-	/* MLC OneNAND has 4KiB page size */
-	if (onenand_readw(THIS_ONENAND(ONENAND_REG_TECHNOLOGY)))
-		pagesize <<= 1;
+	int block = 0, page = ONENAND_START_PAGE, offset = 0;
+	int pagesize = 0, erase_shift =0;
+	int erasesize = 0, nblocks = 0;
+
+	if(onenand_readw(ONENAND_REG_TECHNOLOGY)) {
+		pagesize = 4096; /* MLC OneNAND has 4KiB pagesize */
+		erase_shift = 18;
+	} else {
+		pagesize = 2048;
+		erase_shift = 17;
+	}
+	erasesize = ONENAND_PAGES_PER_BLOCK * pagesize;
+	nblocks = (CONFIG_SYS_MONITOR_LEN + erasesize -1) >> erase_shift;
 
 	/* NOTE: you must read page from page 1 of block 0 */
 	/* read the block page by page*/
-	for (page = ONENAND_START_PAGE;
-	    page < ONENAND_PAGES_PER_BLOCK; page++) {
-
-		onenand_read_page(0, page, buf + offset, pagesize);
-		offset += pagesize;
+	for (; block < nblocks; block++) {
+		for (; page < ONENAND_PAGES_PER_BLOCK; page++) {
+			if (onenand_read_page(block, page, buf + offset, pagesize)) {
+				/* This block is bad. Skip it and read next block */
+	 			offset -= page * pagesize;
+				nblocks++;
+				break;
+			}
+			offset += pagesize;
+		}
+		page = 0;
 	}
 
 	return 0;



More information about the U-Boot mailing list