[U-Boot] minicom garbled

Jerry Van Baren gerald.vanbaren at ge.com
Thu Mar 26 13:41:42 CET 2009


SlinceArm wrote:
> Hi , Wolfgang Denk
> 
> Thank for your reply  : )
> 
>> U-Boot 1.1.4 is prehistoric, please use reacent code. And minicom is
>> officially unsupported (see the repective entry in the U-Boot manual).
> 
> Ok , i will try to install u-boot-2009-03 in my board 
> 
> But , is any other setting  cause garbled ??
> 
> I get some information about my issue form internet .
> 
> They say , the issue is caused about my system language  
> 
> I changed it ( export LANG=C and my minicom character encoding )  
> 
> But the issue still there . 
> 
>> Baudrate : 115200 8N1  
> 
>>> Maybe that setting is simply wrong?
> 
> I refer my board manual , it's 115200 8N1

Do you know the u-boot you loaded is configured for your board?  Another 
way for garbling is if your board's baud rate generator (clocking) is 
not what the u-boot that you loaded is configured for, causing it to 
generate an oddball baud rate.

gvb


More information about the U-Boot mailing list