[U-Boot] [PATCH 1/5] NetStar: config reindentation

[Ladislav Michl]

Fix indentation broken by symbol renames. "Sort" driver related definitons.

Signed-off-by: Ladislav Michl <ladis at linux-mips.org>

diff --git a/include/configs/netstar.h b/include/configs/netstar.h
index 2c90265..0b578e8 100644
--- a/include/configs/netstar.h
+++ b/include/configs/netstar.h
@@ -64,12 +64,12 @@
  */
 #define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 #define CONFIG_SYS_MAX_FLASH_BANKS	1
-#define PHYS_FLASH_1_SIZE	(1 * 1024 * 1024)
+#define PHYS_FLASH_1_SIZE		(1 * 1024 * 1024)
 #define CONFIG_SYS_MAX_FLASH_SECT	19
 #define CONFIG_SYS_FLASH_ERASE_TOUT	(5*CONFIG_SYS_HZ) /* in ticks */
 #define CONFIG_SYS_FLASH_WRITE_TOUT	(5*CONFIG_SYS_HZ)
 
-#define CONFIG_SYS_MONITOR_BASE	PHYS_FLASH_1
+#define CONFIG_SYS_MONITOR_BASE		PHYS_FLASH_1
 #define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
 
 /*
@@ -97,33 +97,28 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_DRIVER_SMC91111
-#define CONFIG_SMC91111_BASE	0x04000300
-
-/*
- * NS16550 Configuration
- */
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
 #define CONFIG_SYS_NS16550_CLK		(CONFIG_XTAL_FREQ)	/* can be 12M/32Khz or 48Mhz  */
-#define CONFIG_SYS_NS16550_COM1	OMAP1510_UART1_BASE	/* uart1 */
+#define CONFIG_SYS_NS16550_COM1		OMAP1510_UART1_BASE	/* uart1 */
+
+#define CONFIG_DRIVER_SMC91111
+#define CONFIG_SMC91111_BASE		0x04000300
 
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_BAUDRATE		115200
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		0x04000000 + (2 << 23)
+#define NAND_ALLOW_ERASE_ALL		1
+
+
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*#define CONFIG_SKIP_RELOCATE_UBOOT*/
 /*#define CONFIG_SKIP_LOWLEVEL_INIT */
 
 /*
- * NAND flash
- */
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE	0x04000000 + (2 << 23)
-#define NAND_ALLOW_ERASE_ALL	1
-
-/*
  * partitions (mtdparts command line support)
  */
 #define CONFIG_JFFS2_CMDLINE
@@ -136,7 +131,6 @@
 /*
  * Command line configuration.
  */
-
 #define CONFIG_CMD_BDI
 #define CONFIG_CMD_BOOTD
 #define CONFIG_CMD_DHCP