[U-Boot] question about uboot and mpc8548cds

[阎淼]

Hi, all

     I am a newbie using uboot-1.3.4 on mpc8548cds and I can not bring
up my board.

     system hangs up when executing the instrction:

     lwz r5, 0(r3)

     this instruction is accessing the CCSR register after CCSBAR is
relocated to 0xe0000000,
     and the value of r3 register is 0xe0000000.

     I use the default settings. could somebody give me some directions ?

    regards!