[U-Boot] About PCI of U-BOOT of CANYONLANDS

[Stefan Roese]

On Wednesday 18 March 2009, Felix Radensky wrote:
> >> Looks like you have ATI cards in both PCI-E slots and also SATA
> >> enabled. This cannot work, as SATA shares lines with x1 PCI-E
> >> slot on Canyonlands.  Use J6 jumper to enable both PCI-E slots.
> >
> > No, it's PCI and not PCIe.
> >
> > Best regards,
> > Stefan
>
> I see. Sorry for the noise. I was confused by the presence of two devices,
> and the fact that there's only one PCI slot on this board. It should be a
> multifunction PCI device then.

Yep. :)

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================