[U-Boot] U-boot NAND boot on IMX31 3stack(ARM)

[alfred steele]

Hi Scott,

Thanks!
The only requirement i have currently is to be able to populate the
device table with the  "Samsung K9F1G08R0A"  because it does not
appear in the existing list. This would help the NFC read the part id
and the other  NAND attributes correctly on the target.

Thanks & Reagrds,
Munro.


On Tue, Mar 31, 2009 at 12:20 PM, Scott Wood <scottwood at freescale.com> wrote:
> alfred steele wrote:
>>
>> Hi Scott:
>> Thanks!
>>
>>
>>>> I am also wondering if there is a include file which builds up a table
>>>> of working NAND devices and thier attributes which tells the U-boot on
>>>> the parameters about a particular NAND device on the board like
>>>> Block_size , page_size, device size, pages per block, device id etc.
>>>> Or This information needs to be kind of hardcoded every time.
>>>
>>> drivers/mtd/nand/nand_ids.c
>>
>> I have three files which probably make sense to include the new flash
>> part.
>> drivers/mtd/nand/nand_ids.c
>
> This is the one.  However, an individual NAND driver shouldn't have to care;
> it will be taken care of by the NAND subsystem.
>
>> ./common/cmd_doc.c
>> ./include/linux/mtd/nand_ids.h:
>
> Ignore these.  They are legacy code that will soon be removed.
>
>> At this point, i do not understand the purpose of each and especially
>> how would the structure flash_id be populated from our data sheet for
>> the flash part we use
>>  "Samsung K9F1G08R0A".
>
> Most likely it is already in the table.
>
>> I basically do not understand all the elements of the array
>> nand_flash_dev nand_flash_ids[] to be able to populate it correctly.
>
> Which field in particular are you unsure of?  They are described in the
> definition of nand_flash_dev in include/linux/mtd/nand.h.
>
> Is there any reason why your NAND controller driver needs to care about any
> of this, as opposed to just hooking up to the NAND subsystem?
>
> -Scott
>