[U-Boot] [PATCH v4] board support patch for phyCORE-MPC5200B-tiny

[Markus Rathgeb]

Hi!

Have you read the BIOSEMU stuff in the mailing list?
Can you adjust the PCI section and perhaps you can include the video
example (set undef video).

Greats,
Markus

On Fri, Mar 27, 2009 at 10:48 PM, Jon Smirl <jonsmirl at gmail.com> wrote:
> On Fri, Mar 27, 2009 at 4:12 PM, Wolfgang Denk <wd at denx.de> wrote:
>>> >  create mode 100644 board/phytec/pcm030/Makefile
>>> >  create mode 100644 board/phytec/pcm030/config.mk
>>> >  create mode 100644 board/phytec/pcm030/mt46v32m16-75.h
>>> >  create mode 100644 board/phytec/pcm030/pcm030.c
>>> >  create mode 100644 include/configs/pcm030.h
>>
>> Entries in MAKEALL and in MAINTAINERS missing.
>
> Sascha and Eric, who going to be the Phytec/Pengutronix maintainer for this?
> Send me a couple sets of MX35 development hardware and I'll maintain this.
>
>>
>> Except from that, it looks OK to me.
>>
>> Best regards,
>>
>> Wolfgang Denk
>
>
> --
> Jon Smirl
> jonsmirl at gmail.com
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>