[U-Boot] [PATCH 3/6 v2] powerpc: common updates for keymile boards

Heiko Schocher hs at denx.de
Thu Mar 12 07:37:18 CET 2009


- added to keymile-common.h:
  - bootcount support
  - COMMAND HISTORY
  - CONFIG_AUTO_COMPLETE
  - CONFIG_SYS_FLASH_PROTECTION
  - JFFS2 support
  - CONFIG_VERSION_VARIABLE
- extracted common I2C settings for all boards
- common default environment settings summarized

Signed-off-by: Heiko Schocher <hs at denx.de>
---
 include/configs/keymile-common.h |  152 +++++++++++++++++++++++++++++++++++++-
 include/configs/kmeter1.h        |   52 ++-----------
 include/configs/mgcoge.h         |   65 ++++------------
 include/configs/mgsuvd.h         |   59 ++++-----------
 4 files changed, 189 insertions(+), 139 deletions(-)

diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h
index c7f6ba3..58b95f4 100644
--- a/include/configs/keymile-common.h
+++ b/include/configs/keymile-common.h
@@ -27,9 +27,7 @@
 /* Do boardspecific init for all boards */
 #define CONFIG_BOARD_EARLY_INIT_R       1

-#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGSUVD)
 #define CONFIG_BOOTCOUNT_LIMIT
-#endif

 /*
  * Command line configuration.
@@ -45,10 +43,11 @@
 #define CONFIG_CMD_DTT
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_I2C
+#define CONFIG_CMD_JFFS2
+#define CONFIG_JFFS2_CMDLINE

 #undef	CONFIG_WATCHDOG			/* disable platform specific watchdog */

-#define CONFIG_BOOTCOMMAND	"run net_nfs"
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
 #undef	CONFIG_BOOTARGS			/* the boot command will set bootargs */

@@ -68,6 +67,8 @@
 #define CONFIG_SYS_MAXARGS		16	/* max number of command args */
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size  */
 #define CONFIG_CMDLINE_EDITING		1	/* add command line history     */
+#define CONFIG_COMMAND_HISTORY		1
+#define CONFIG_AUTO_COMPLETE		/* add autocompletion support	*/

 #define CONFIG_HUSH_INIT_VAR	1

@@ -95,6 +96,25 @@
 #define CONFIG_SYS_SLOT_ID_OFF		(0x07)	/* register offset */
 #define CONFIG_SYS_SLOT_ID_MASK		(0x3f)	/* mask for slot ID bits */

+#define CONFIG_I2C_MULTI_BUS	1
+#define CONFIG_I2C_CMD_TREE	1
+#define CONFIG_SYS_MAX_I2C_BUS		2
+#define CONFIG_SYS_I2C_INIT_BOARD	1
+#define CONFIG_I2C_MUX		1
+
+/* EEprom support */
+#define CONFIG_SYS_I2C_MULTI_EEPROMS	1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+/* Support the IVM EEprom */
+#define	CONFIG_SYS_IVM_EEPROM_ADR	0x50
+#define CONFIG_SYS_IVM_EEPROM_MAX_LEN	0x400
+#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN	0x100
+
+#define	CONFIG_SYS_FLASH_PROTECTION 1
+
 /*
  * BOOTP options
  */
@@ -103,4 +123,130 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME

+/* define this to use the keymile's io muxing feature */
+/*#define CONFIG_IO_MUXING */
+
+#ifdef CONFIG_IO_MUXING
+#define	CONFIG_KM_DEF_ENV_IOMUX \
+	"nc=setenv ethact HDLC ETHERNET \0" \
+	"nce=setenv ethact SCC ETHERNET \0"	\
+	"stderr=serial,nc \0"	\
+	"stdin=serial,nc \0" \
+	"stdout=serial,nc \0" \
+	"tftpsrcp=69 \0" \
+	"tftpdstp=69 \0"
+#else
+#define	CONFIG_KM_DEF_ENV_IOMUX \
+	"stderr=serial \0" \
+	"stdin=serial \0"	 \
+	"stdout=serial \0"
+#endif
+
+#ifndef CONFIG_KM_DEF_ENV_PRIVATE
+#define	CONFIG_KM_DEF_ENV_PRIVATE \
+	"kmprivate=empty\0"
+#endif
+
+#define xstr(s)	str(s)
+#define str(s)	#s
+
+#ifndef CONFIG_KM_DEF_ENV
+#define CONFIG_KM_DEF_ENV	\
+	"netdev=eth0\0"							\
+	"u-boot_addr_r=100000\0"					\
+	"kernel_addr_r=200000\0"					\
+	"fdt_addr_r=600000\0"						\
+	"ram_ws=800000 \0"						\
+	"autoscr_ws=780000 \0"						\
+	"fdt_file=" xstr(CONFIG_HOSTNAME) "/" 				\
+		xstr(CONFIG_HOSTNAME) ".dtb\0"				\
+	"u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin \0" 		\
+	"kernel_file=" xstr(CONFIG_HOSTNAME) "/uImage \0" 		\
+	"load=tftp ${u-boot_addr_r} ${u-boot}\0"			\
+	"update=protect off " xstr(BOOTFLASH_START) " +${filesize};"	\
+		"erase " xstr(BOOTFLASH_START) "  +${filesize};"	\
+		"cp.b ${u-boot_addr_r} " xstr(BOOTFLASH_START) 		\
+		"  ${filesize};"					\
+		"protect on " xstr(BOOTFLASH_START) "  +${filesize}\0"	\
+	"load_fdt=tftp ${fdt_addr_r} ${fdt_file}; "			\
+		"setenv actual_fdt_addr ${fdt_addr_r} \0" 		\
+	"load_kernel=tftp ${kernel_addr_r} ${kernel_file}; " 		\
+		"setenv actual_kernel_addr ${kernel_addr_r} \0" 	\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"mtdargs=setenv bootargs root=${actual_rootfs} rw "		\
+		"rootfstype=jffs2 \0" 					\
+	"altmtdargs=setenv bootargs root=${backup_rootfs} rw "		\
+		"rootfstype=jffs2 \0" 					\
+	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addboardid=setenv bootargs ${bootargs} " 			\
+		"hwKey=${IVM_HWKey} boardId=0x${IVM_BoardId} \0" 	\
+	"addpram=setenv bootargs ${bootargs} "				\
+		"mem=${mem} pram=${pram}\0"				\
+	"pram=" xstr(CONFIG_PRAM) "k\0"					\
+	"net_nfs=tftp ${kernel_addr_r} ${kernel_file}; "		\
+		"tftp ${fdt_addr_r} ${fdt_file}; "			\
+		"run nfsargs addip addcon addboardid addpram;"		\
+		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\
+	"net_self=tftp ${kernel_addr_r} ${kernel_file}; "		\
+		"tftp ${fdt_addr_r} ${fdt_file}; "			\
+		"tftp ${ramdisk_addr} ${ramdisk_file}; "		\
+		"run ramargs addip addboardid addpram; "		\
+		"bootm ${kernel_addr_r} ${ramdisk_addr} ${fdt_addr_r}\0"\
+	"flash_nfs=run nfsargs addip addcon;"				\
+		"bootm ${kernel_addr} - ${fdt_addr}\0"			\
+	"flash_self=run ramargs addip addcon addboardid addpram;"	\
+		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
+	"bootcmd=run mtdargs addip addcon addboardid addpram; "		\
+		"bootm ${actual_kernel_addr} - ${actual_fdt_addr} \0"	\
+	"altbootcmd=run altmtdargs addip addcon addboardid addpram; "	\
+		"bootm ${backup_kernel_addr} - ${backup_fdt_addr} \0"	\
+	"actual0=setenv actual_bank 0; setenv actual_kernel_addr "	\
+		"${bank0_kernel_addr}; "				\
+		"setenv actual_fdt_addr ${bank0_fdt_addr}; "		\
+		"setenv actual_rootfs ${bank0_rootfs} \0" 		\
+	"actual1=setenv actual_bank 1; setenv actual_kernel_addr "	\
+		"${bank1_kernel_addr}; "				\
+		"setenv actual_fdt_addr ${bank1_fdt_addr}; "		\
+		"setenv actual_rootfs ${bank1_rootfs} \0" 		\
+	"backup0=setenv backup_bank 0; setenv backup_kernel_addr " 	\
+		"${bank0_kernel_addr}; "				\
+		"setenv backup_fdt_addr ${bank0_fdt_addr}; "		\
+		"setenv backup_rootfs ${bank0_rootfs} \0"		\
+	"backup1=setenv backup_bank 1; setenv backup_kernel_addr "	\
+		"${bank1_kernel_addr}; "				\
+		"setenv backup_fdt_addr ${bank1_fdt_addr}; " 		\
+		"setenv backup_rootfs ${bank1_rootfs} \0" 		\
+	"setbank0=run actual0 backup1 \0" 				\
+	"setbank1=run actual1 backup0 \0" 				\
+	"release=setenv bootcmd "					\
+		"\'run mtdargs addip addcon addboardid addpram;" 	\
+		"bootm ${actual_kernel_addr} - ${actual_fdt_addr} \'; "	\
+		"saveenv \0"						\
+	"develop=setenv bootcmd "					\
+		"\'run nfsargs addip addcon addboardid addpram;" 	\
+		"bootm ${actual_kernel_addr} - ${actual_fdt_addr} \'; "	\
+		"saveenv \0"						\
+	"developall=setenv bootcmd "					\
+		"\'run load_fdt load_kernel nfsargs "			\
+		"addip addcon addboardid addpram; "			\
+		"bootm ${actual_kernel_addr} - ${actual_fdt_addr} \'; "	\
+		"saveenv \0"						\
+	"set_new_esw_script=setenv new_esw_script "			\
+		"new_esw_0x${IVM_BoardId}_0x${IVM_HWKey}.scr \0"	\
+	"new_esw=run set_new_esw_script; "				\
+		"tftp ${autoscr_ws} ${new_esw_script}; "		\
+		"iminfo ${autoscr_ws}; autoscr ${autoscr_ws} \0"	\
+	"bootlimit=0 \0" 						\
+	CONFIG_KM_DEF_ENV_IOMUX						\
+	CONFIG_KM_DEF_ENV_PRIVATE					\
+	""
+#endif /* CONFIG_KM_DEF_ENV */
+
+#define CONFIG_VERSION_VARIABLE 	/* include version env variable */
+
 #endif /* __CONFIG_KEYMILE_H */
diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h
index 49a801f..f7fc6c5 100644
--- a/include/configs/kmeter1.h
+++ b/include/configs/kmeter1.h
@@ -33,6 +33,7 @@
 /* include common defines/options for all Keymile boards */
 #include "keymile-common.h"

+#undef CONFIG_SYS_I2C_INIT_BOARD
 #define CONFIG_MISC_INIT_R	1
 /*
  * System Clock Setup
@@ -319,15 +320,6 @@

 /* EEprom support */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
-#define CONFIG_SYS_I2C_MULTI_EEPROMS	1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
-
-/* Support the IVM EEprom */
-#define	CONFIG_SYS_IVM_EEPROM_ADR	0x50
-#define CONFIG_SYS_IVM_EEPROM_MAX_LEN	0x400
-#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN	0x100

 /* I2C SYSMON (LM75, AD7414 is almost compatible)			*/
 #define CONFIG_DTT_LM75		1	/* ON Semi's LM75		*/
@@ -457,47 +449,17 @@

 #define CONFIG_EXTRA_ENV_SETTINGS \
        CONFIG_KM_DEF_ENV						\
-	"netdev=eth0\0"							\
 	"rootpath=/opt/eldk/ppc_82xx\0"					\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addtty=setenv bootargs ${bootargs}"				\
-		" console=ttyS0,${baudrate}\0"				\
-	"fdt_addr=f0080000\0"						\
-	"kernel_addr=f00a0000\0"					\
-	"ramdisk_addr=f03a0000\0"					\
-	"kernel_addr_r=400000\0"					\
-	"fdt_addr_r=800000\0"						\
-	"ramdisk_addr_r=810000\0"					\
-	"flash_self=run ramargs addip addtty;"				\
-		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
-	"flash_nfs=run nfsargs addip addtty;"				\
-		"bootm ${kernel_addr} - ${fdt_addr}\0"			\
-	"net_nfs=tftp ${kernel_addr_r} ${boot_file}; "			\
-		"tftp ${fdt_addr_r} ${fdt_file}; "			\
-		"run nfsargs addip addtty;"				\
-		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\
-	"fdt_file=/tftpboot/kmeter1/kmeter1.dtb\0"			\
-	"boot_file=/tftpboot/kmeter1/uImage\0"				\
+	"addcon=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
 	"ramdisk_file=/tftpboot/kmeter1/uRamdisk\0"			\
-	"u-boot=/tftpboot/kmeter1/u-boot.bin\0"				\
-	"loadaddr=" MK_STR(CONFIG_SYS_LOAD_ADDR) "\0"			\
-	"load=tftp $loadaddr ${u-boot}\0"				\
-	"update=protect off " MK_STR(TEXT_BASE) " +$filesize;"		\
-		"erase " MK_STR(TEXT_BASE) " +$filesize;"		\
-		"cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize;"	\
-		"protect on " MK_STR(TEXT_BASE) " +$filesize;"		\
-		"cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize;"	\
-		"setenv filesize;saveenv\0"				\
-	"upd=run load update\0"						\
 	"loadram=tftp ${ramdisk_addr_r} ${ramdisk_file}\0"		\
 	"loadfdt=tftp ${fdt_addr_r} ${fdt_file}\0"			\
-	"loadkernel=tftp ${kernel_addr_r} ${boot_file}\0"		\
+	"loadkernel=tftp ${kernel_addr_r} ${bootfile}\0"		\
 	"unlock=yes\0"							\
+	"fdt_addr=F0080000\0"						\
+	"kernel_addr=F00a0000\0"					\
+	"ramdisk_addr=F03a0000\0"					\
+	"ramdisk_addr_r=F10000\0"					\
 	"EEprom_ivm=pca9547:70:9\0"					\
 	"dtt_bus=pca9547:70:a\0"					\
 	"mtdids=nor0=app \0"						\
diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h
index 8f3a420..cc42101 100644
--- a/include/configs/mgcoge.h
+++ b/include/configs/mgcoge.h
@@ -86,39 +86,24 @@
 	"mtdparts=boot:384k(u-boot),128k(env),128k(envred),3456k(free);" \
 	"app:3m(esw0),10m(rootfs0),3m(esw1),10m(rootfs1),1m(var),5m(cfg)"

+#ifndef CONFIG_KM_DEF_ENV		/* if not set by keymile-common.h */
+#define CONFIG_KM_DEF_ENV "km-common=empty\0"
+#endif
 /*
  * Default environment settings
  */
-#define CONFIG_EXTRA_ENV_SETTINGS						\
-	"netdev=eth0\0"								\
-	"u-boot_addr=100000\0"							\
-	"kernel_addr=200000\0"							\
-	"fdt_addr=400000\0"							\
-	"rootpath=/opt/eldk-4.2/ppc_82xx\0"					\
-	"u-boot=/tftpboot/mgcoge/u-boot.bin\0"					\
-	"bootfile=/tftpboot/mgcoge/uImage\0"					\
-	"fdt_file=/tftpboot/mgcoge/mgcoge.dtb\0"				\
-	"load=tftp ${u-boot_addr} ${u-boot}\0"					\
-	"update=prot off fe000000 fe03ffff; era fe000000 fe03ffff; "		\
-		"cp.b ${u-boot_addr} fe000000 ${filesize};"			\
-		"prot on fe000000 fe03ffff\0"					\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"				\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "				\
-		"nfsroot=${serverip}:${rootpath}\0"				\
-	"addcons=setenv bootargs ${bootargs} console=ttyCPM0,${baudrate}\0"	\
-	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"			\
-	"addip=setenv bootargs ${bootargs} "					\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:"			\
-		"${netmask}:${hostname}:${netdev}:off panic=1\0"		\
-	"net_nfs=tftp ${kernel_addr} ${bootfile}; "				\
-		"tftp ${fdt_addr} ${fdt_file}; run nfsargs addip addcons;"	\
-		"bootm ${kernel_addr} - ${fdt_addr}\0"				\
-	"net_self=tftp ${kernel_addr} ${bootfile}; "				\
-		"tftp ${fdt_addr} ${fdt_file}; "				\
-		"tftp ${ramdisk_addr} ${ramdisk_file}; "			\
-		"run ramargs addip; "						\
-		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"		\
-	"EEprom_ivm=pca9544a:70:4 \0"						\
+#define	CONFIG_EXTRA_ENV_SETTINGS	\
+	CONFIG_KM_DEF_ENV						\
+	"rootpath=/opt/eldk/ppc_82xx\0"					\
+	"addcon=setenv bootargs ${bootargs} "				\
+		"console=ttyCPM0,${baudrate}\0"				\
+	"mtdids=nor0=boot,nor1=app \0"					\
+	"mtdparts=mtdparts=boot:384k(u-boot),128k(env),128k(envred),"	\
+		"3456k(free);app:3m(esw0),10m(rootfs0),3m(esw1),"	\
+		"10m(rootfs1),1m(var),5m(cfg) \0"			\
+	"partition=nor1,5 \0"						\
+	"new_env=prot off FE060000 FE09FFFF; era FE060000 FE09FFFF \0" 	\
+	"EEprom_ivm=pca9544a:70:4 \0"					\
 	"mtdparts=" MK_STR(MTDPARTS_DEFAULT) "\0"				\
 	""

@@ -140,7 +125,7 @@
 #define CONFIG_SYS_RAMBOOT
 #endif

-#define CONFIG_SYS_MONITOR_LEN		(384 << 10)     /* Reserve 384KB for Monitor */
+#define CONFIG_SYS_MONITOR_LEN		(384 << 10)	/* Reserve 384KB for Monitor */

 #define CONFIG_ENV_IS_IN_FLASH

@@ -175,24 +160,6 @@
 			else    iop->pdat &= ~0x00020000
 #define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */

-#define CONFIG_I2C_MULTI_BUS	1
-#define CONFIG_I2C_CMD_TREE	1
-#define CONFIG_SYS_MAX_I2C_BUS		2
-#define CONFIG_SYS_I2C_INIT_BOARD	1
-#define CONFIG_I2C_MUX		1
-
-/* EEprom support */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
-#define CONFIG_SYS_I2C_MULTI_EEPROMS	1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
-
-/* Support the IVM EEprom */
-#define	CONFIG_SYS_IVM_EEPROM_ADR	0x50
-#define CONFIG_SYS_IVM_EEPROM_MAX_LEN	0x400
-#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN	0x100
-
 /* I2C SYSMON (LM75, AD7414 is almost compatible)			*/
 #define CONFIG_DTT_LM75		1	/* ON Semi's LM75		*/
 #define CONFIG_DTT_SENSORS	{0}	/* Sensor addresses		*/
diff --git a/include/configs/mgsuvd.h b/include/configs/mgsuvd.h
index 4623e4c..9ec24f4 100644
--- a/include/configs/mgsuvd.h
+++ b/include/configs/mgsuvd.h
@@ -58,32 +58,23 @@
 	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 	"echo"

-#define CONFIG_EXTRA_ENV_SETTINGS						\
-	"netdev=eth0\0"								\
-	"addcons=setenv bootargs ${bootargs} console=ttyCPM0,${baudrate}\0"	\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "				\
-		"nfsroot=${serverip}:${rootpath}\0"				\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"				\
-	"addip=setenv bootargs ${bootargs} "					\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"		\
-		":${hostname}:${netdev}:off panic=1\0"				\
-	"flash_nfs=run nfsargs addip;"						\
-		"bootm ${kernel_addr}\0"					\
-	"flash_self=run ramargs addip;"						\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"			\
-	"net_nfs=tftp ${kernel_addr} ${bootfile}; "				\
-		"tftp ${fdt_addr} ${fdt_file}; run nfsargs addip addcons;"	\
-		"bootm ${kernel_addr} - ${fdt_addr}\0"				\
-	"rootpath=/opt/eldk/ppc_8xx\0"						\
-	"bootfile=/tftpboot/mgsuvd/uImage\0"					\
-	"fdt_addr=400000\0"							\
-	"kernel_addr=200000\0"							\
-	"fdt_file=/tftpboot/mgsuvd/mgsuvd.dtb\0"				\
-	"load=tftp 200000 ${u-boot}\0"						\
-	"update=protect off f0000000 +${filesize};"				\
-		"erase f0000000 +${filesize};"					\
-		"cp.b 200000 f0000000 ${filesize};"				\
-		"protect on f0000000 +${filesize}\0"				\
+#define BOOTFLASH_START	F0000000
+#define CONFIG_PRAM	512	/* protected RAM [KBytes] */
+
+#define CONFIG_ENV_IVM	"EEprom_ivm=pca9544a:70:4 \0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	CONFIG_KM_DEF_ENV						\
+	"rootpath=/opt/eldk/ppc_8xx\0"					\
+	"addcon=setenv bootargs ${bootargs} "				\
+		"console=ttyCPM0,${baudrate}\0"				\
+	"mtdids=nor0=app \0"						\
+	"mtdparts=mtdparts=app:384k(u-boot),128k(env),128k(envred),"	\
+		"128k(free),1536k(esw0),8704k(rootfs0),1536k(esw1),"	\
+		"2432k(rootfs1),640k(var),768k(cfg)\0"			\
+	"partition=nor0,9 \0"						\
+	"new_env=prot off F0060000 F009FFFF; era F0060000 F009FFFF \0" 	\
+	CONFIG_ENV_IVM							\
 	""

 #undef CONFIG_RTC_MPC8xx		/* MPC866 does not support RTC	*/
@@ -305,23 +296,7 @@
 			}
 #define I2C_DELAY	udelay(50)	/* 1/4 I2C clock duration */

-#define CONFIG_I2C_MULTI_BUS	1
-#define CONFIG_I2C_CMD_TREE	1
-#define CONFIG_SYS_MAX_I2C_BUS		2
-#define CONFIG_SYS_I2C_INIT_BOARD	1
-#define CONFIG_I2C_MUX		1
-
-/* EEprom support */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
-#define CONFIG_SYS_I2C_MULTI_EEPROMS	1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
-
-/* Support the IVM EEprom */
-#define	CONFIG_SYS_IVM_EEPROM_ADR	0x50
-#define CONFIG_SYS_IVM_EEPROM_MAX_LEN	0x400
-#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN	0x100

 /* I2C SYSMON (LM75, AD7414 is almost compatible)			*/
 #define CONFIG_DTT_LM75		1	/* ON Semi's LM75		*/
-- 
1.6.0.6

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


More information about the U-Boot mailing list