[U-Boot] [RFC PATCH 4/6] integratorap/cp/versatile: remove non used functions

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
Cc: Peter Pearse <Peter.Pearse at arm.com>
---
 board/armltd/integratorap/integratorap.c |   28 ----------------------------
 board/armltd/integratorcp/integratorcp.c |   21 ---------------------
 board/armltd/versatile/versatile.c       |    7 -------
 3 files changed, 0 insertions(+), 56 deletions(-)

diff --git a/board/armltd/integratorap/integratorap.c b/board/armltd/integratorap/integratorap.c
index b20b129..f58956e 100644
--- a/board/armltd/integratorap/integratorap.c
+++ b/board/armltd/integratorap/integratorap.c
@@ -38,8 +38,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-void flash__init (void);
-void ether__init (void);
 void peripheral_power_enable (void);
 
 #if defined(CONFIG_SHOW_BOOT_PROGRESS)
@@ -51,13 +49,6 @@ void show_boot_progress(int progress)
 
 #define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF)
 
-static inline void delay (unsigned long loops)
-{
-	__asm__ volatile ("1:\n"
-		"subs %0, %1, #1\n"
-		"bne 1b":"=r" (loops):"0" (loops));
-}
-
 /*
  * Miscellaneous platform dependent initialisations
  */
@@ -79,11 +70,9 @@ extern void cm_remap(void);
 
 	icache_enable ();
 
-	flash__init ();
 	return 0;
 }
 
-
 int misc_init_r (void)
 {
 #ifdef CONFIG_PCI
@@ -93,23 +82,6 @@ int misc_init_r (void)
 	return (0);
 }
 
-
-/******************************
- Routine:
- Description:
-******************************/
-void flash__init (void)
-{
-}
-/*************************************************************
- Routine:ether__init
- Description: take the Ethernet controller out of reset and wait
-			   for the EEPROM load to complete.
-*************************************************************/
-void ether__init (void)
-{
-}
-
 /******************************
  Routine:
  Description:
diff --git a/board/armltd/integratorcp/integratorcp.c b/board/armltd/integratorcp/integratorcp.c
index 16620bb..5897147 100644
--- a/board/armltd/integratorcp/integratorcp.c
+++ b/board/armltd/integratorcp/integratorcp.c
@@ -37,8 +37,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-void flash__init (void);
-void ether__init (void);
 void peripheral_power_enable (void);
 
 #if defined(CONFIG_SHOW_BOOT_PROGRESS)
@@ -71,12 +69,9 @@ extern void cm_remap(void);
 
 	icache_enable ();
 
-	flash__init ();
-	ether__init ();
 	return 0;
 }
 
-
 int misc_init_r (void)
 {
 	setenv("verify", "n");
@@ -87,22 +82,6 @@ int misc_init_r (void)
  Routine:
  Description:
 ******************************/
-void flash__init (void)
-{
-}
-/*************************************************************
- Routine:ether__init
- Description: take the Ethernet controller out of reset and wait
-	      for the EEPROM load to complete.
-*************************************************************/
-void ether__init (void)
-{
-}
-
-/******************************
- Routine:
- Description:
-******************************/
 int dram_init (void)
 {
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
diff --git a/board/armltd/versatile/versatile.c b/board/armltd/versatile/versatile.c
index 0f35caa..197bc89 100644
--- a/board/armltd/versatile/versatile.c
+++ b/board/armltd/versatile/versatile.c
@@ -46,13 +46,6 @@ void show_boot_progress(int progress)
 
 #define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF)
 
-static inline void delay (unsigned long loops)
-{
-	__asm__ volatile ("1:\n"
-		"subs %0, %1, #1\n"
-		"bne 1b":"=r" (loops):"0" (loops));
-}
-
 /*
  * Miscellaneous platform dependent initialisations
  */
-- 
1.6.1.3