May 2009 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Fri May 1 00:02:14 CEST 2009
Ending: Sun May 31 23:45:42 CEST 2009
Messages: 1643

• [U-Boot] FLASH write bug on NGW100   Eirik Aanonsen
• [U-Boot] Turning optimizations off   Fahd Abidi
• [U-Boot] MPC8536DS Evaluation Board Force DDR Setting cannot be done properly   AgarwalAshish
• [U-Boot] MPC8536DS Evaluation Board Force DDR Setting cannot bedone properly   AgarwalAshish
• [U-Boot] uBoot Debug: GPIO Toggling does not working over 8536DS uboot   AgarwalAshish
• [U-Boot] MPC8536DS Evaluation Board Force DDR Setting cannot bedone properly   AgarwalAshish
• [U-Boot] File For Your Claim   Amanda
• [U-Boot] Micrel Switch KS8995M Driver   Raphael Amorim
• [U-Boot] SD Card Support   Raphael Amorim
• [U-Boot] Guidelines: Adding new drivers   Raphael Amorim
• [U-Boot] Help with driver for a ethernet switch   Raphael Amorim
• [U-Boot] PATCH: bugfix for reading maximum TLB size on mpc85xx   Fredrik Arnerup
• [U-Boot] DDR2 configuration in MPC85xx   Fredrik Arnerup
• [U-Boot] Ethernet not working on OMAP3 board with   Eric BENARD
• [U-Boot] Ethernet not working on OMAP3 board with   Eric BENARD
• [U-Boot] AMCC 405EX Trap   Jerry Van Baren
• [U-Boot] MII register display   Jerry Van Baren
• [U-Boot] QUESTION: How do I generate an assembly listing?   Jerry Van Baren
• [U-Boot] Add a new command to U-Boot   Jerry Van Baren
• [U-Boot] Add a new command to U-Boot   Jerry Van Baren
• [U-Boot] Cross-compiling U-Boot on Mac OS X -- can't find crc32.c?   Jerry Van Baren
• [U-Boot] Turning optimizations off   Jerry Van Baren
• [U-Boot] Large Block USB Flash Drive Problem   Barnes, Clifton A.
• [U-Boot] AMCC 460EX Video on PCIe   Henry Bausley
• [U-Boot] OMAP3: Pending patches   Dirk Behme
• [U-Boot] Zoom2 initial support rebased to arm/next   Dirk Behme
• [U-Boot] [PATCH V2] arm: timer and interrupt init rework   Dirk Behme
• [U-Boot] [PATCH V2] arm: timer and interrupt init rework   Dirk Behme
• [U-Boot] [PATCH 1/1] omap3: remove copy&paste global arm interrupts code   Dirk Behme
• [U-Boot] [PATCH 1/1] omap3: remove copy&paste global arm interrupts code   Dirk Behme
• [U-Boot] [PATCH] OMAP3EVM: Set default bootfile   Dirk Behme
• [U-Boot] [PATCH 0/3] OMAP3: Minor code clean up, no functional change   Dirk Behme
• [U-Boot] [PATCH 1/3] OMAP3: Remove dublicated interrupt code   Dirk Behme
• [U-Boot] [PATCH 2/3] OMAP3: Rename interrupts.c to timer.c   Dirk Behme
• [U-Boot] [PATCH 3/3] OMAP3: Reorganize Makefile style   Dirk Behme
• [U-Boot] [PATCH] OMAP3EVM: net_chip uses CS5 not CS6   Dirk Behme
• [U-Boot] [PATCH] OMAP3: Introduce CONFIG option for power code   Dirk Behme
• [U-Boot] [PATCH V2] arm: timer and interrupt init rework   Dirk Behme
• [U-Boot] Zoom2 initial support rebased to arm/next   Dirk Behme
• [U-Boot] [PATCH] OMAP3EVM: net_chip uses CS5 not CS6   Dirk Behme
• [U-Boot] ARM: Updating mach-types.h   Dirk Behme
• [U-Boot] [PATCH] OMAP3EVM: net_chip uses CS5 not CS6   Dirk Behme
• [U-Boot] [PATCH] OMAP3EVM: net_chip uses CS5 not CS6   Dirk Behme
• [U-Boot] [PATCH] OMAP3: Introduce CONFIG option for power code   Dirk Behme
• [U-Boot] [PATCH 3/3] OMAP3: Reorganize Makefile style   Dirk Behme
• [U-Boot] [PATCH 2/3] OMAP3: Rename interrupts.c to timer.c   Dirk Behme
• [U-Boot] [PATCH 2/3] OMAP3: Rename interrupts.c to timer.c   Dirk Behme
• [U-Boot] [PATCH 0/2 v2] OMAP3: Minor code clean up, no functional change   Dirk Behme
• [U-Boot] [PATCH 1/2 v2] OMAP3: Remove dublicated interrupt code   Dirk Behme
• [U-Boot] [PATCH 2/2 v2] OMAP3: Reorganize Makefile style   Dirk Behme
• [U-Boot] [PATCH 1/6] arm: unify interrupt init   Dirk Behme
• [U-Boot] [PATCH 2/6] arm: remove cpu_init   Dirk Behme
• [U-Boot] [PATCH] OMAP3: Introduce CONFIG option for power code   Dirk Behme
• [U-Boot] [PATCH 2/4] omap3: remove typedef for struct gpmc   Dirk Behme
• [U-Boot] [PATCH 0/4] omap3: clean up gpmc config strut   Dirk Behme
• [U-Boot] [PATCH 2/4] omap3: remove typedef for struct gpmc   Dirk Behme
• [U-Boot] [PATCH] OMAP3: Introduce CONFIG option for power code   Dirk Behme
• [U-Boot] [PATCH v2] OMAP3: Introduce CONFIG option for power code   Dirk Behme
• [U-Boot] [PATCH V3] arm: timer and interrupt init rework   Dirk Behme
• [U-Boot] [PATCH] OMAP3: Fix CKE1 MUX setting to allow self-refresh   Dirk Behme
• [U-Boot] [PATCH] OMAP3: Zoom2: Fix missing Board and CPU info   Dirk Behme
• [U-Boot] [PATCH v2] OMAP3: Zoom2: Enable Board and CPU info   Dirk Behme
• [U-Boot] [PATCH] OMAP3: Zoom2: Fix missing Board and CPU info   Dirk Behme
• [U-Boot] [PATCH v2] OMAP3: Introduce CONFIG option for power code   Dirk Behme
• [U-Boot] Ethernet not working on OMAP3 board with   Dirk Behme
• [U-Boot] Ethernet not working on OMAP3 board with   Dirk Behme
• [U-Boot] [PATCHv3 0/5] clean up omap3 configuration structs   Dirk Behme
• [U-Boot] [PATCH 1/3] smc911x: write back the manually set MAC address   Dirk Behme
• [U-Boot] Ethernet not working on OMAP3 board with   Dirk Behme
• [U-Boot] [PATCHv3 3/5] omap3: remove typedefs for configuration structs   Dirk Behme
• [U-Boot] [PATCHv3 3/5] omap3: remove typedefs for configuration structs   Dirk Behme
• [U-Boot] ARM next Pull Request   Dirk Behme
• [U-Boot] [PATCH] change cpu.c under cpu/arm_cortexa8 dir to common code.   Dirk Behme
• [U-Boot] [PATCH] The cache flush using coprocessor must be in lib_arm/cache-cp15.c   Dirk Behme
• [U-Boot] [PATCH] The cache flush using coprocessor must be in lib_arm/cache-cp15.c   Dirk Behme
• [U-Boot] [PATCH] The cache flush using coprocessor must be in lib_arm/cache-cp15.c   Dirk Behme
• [U-Boot] [PATCH] The cache flush using coprocessor must be in lib_arm/cache-cp15.c   Dirk Behme
• [U-Boot] [PATCH] The cache flush using coprocessor must be in lib_arm/cache-cp15.c   Dirk Behme
• [U-Boot] [PATCH] ARM Cortex A8: Move OMAP3 specific reset handler to OMAP3 code   Dirk Behme
• [U-Boot] [PATCH] ARM Cortex A8: Move OMAP3 specific reset handler to OMAP3 code   Dirk Behme
• [U-Boot] Zoom2, Beagle board revision detection.   Dirk Behme
• [U-Boot] [PATCH 1/3] mpc52xx: Add SPI driver.   Grzegorz Bernacki
• [U-Boot] [PATCH 2/3] digsy MTC: Add SPI support.   Grzegorz Bernacki
• [U-Boot] [PATCH 3/3] digsy MTC: Add 'mtc' command.   Grzegorz Bernacki
• [U-Boot] uboot kernel rejects filesystem   Bharat Bhushan
• [U-Boot] uboot kernel rejects filesystem   Bharat Bhushan
• [U-Boot] uboot kernel rejects filesystem   Bharat Bhushan
• [U-Boot] uboot kernel rejects filesystem   Bharat Bhushan
• [U-Boot] at91: fix a USB problem for AT91SAM9261   Remy Bohmer
• [U-Boot] [patch] Convert DM9000 driver for CONFIG_NET_MULTI   Remy Bohmer
• [U-Boot] [patch] Add display cpuinfo for Atmel at91sam9261 Cores   Remy Bohmer
• [U-Boot] at91: fix a USB problem for AT91SAM9261   Remy Bohmer
• [U-Boot] at91: fix a USB problem for AT91SAM9261   Remy Bohmer
• [U-Boot] [PATCH 1/1] Add config option for disabling DM9000-SROM support.   Remy Bohmer
• [U-Boot] [PATCH 1/1] Add config option for disabling DM9000-SROM support.   Remy Bohmer
• [U-Boot] [PATCH 1/1] V2 Add config option for disabling DM9000-SROM support.   Remy Bohmer
• [U-Boot] usbtty Support on AT91SAM9XXX chipsets   Remy Bohmer
• [U-Boot] usbtty Support on AT91SAM9XXX chipsets   Remy Bohmer
• [U-Boot] [patch u-boot arm/next] davinci dm6446evm NAND update   David Brownell
• [U-Boot] [patch u-boot git arm/next] davinci: display correct clock info   David Brownell
• [U-Boot] U-Boot and CONFIG_SYS_DAVINCI_BROKEN_ECC   David Brownell
• [U-Boot] [patch u-boot/arm/next git] initial DaVinci DM355 EVM board support   David Brownell
• [U-Boot] [patch nand/next] davinci_nand chipselect/init cleanup   David Brownell
• [U-Boot] [patch arm/next] dm355 evm support (v2)   David Brownell
• [U-Boot] [PATCH v5] ARM DaVinci Adding DM357 Support   David Brownell
• [U-Boot] [patch arm/next] dm355 evm support (v2)   David Brownell
• [U-Boot] [patch arm/next] dm355 evm support (v3)   David Brownell
• [U-Boot] MICROWORD CORPORATIONS:Final notification to Lottery Winners.   MICROWORD CORPORATIONS
• [U-Boot] 074/05/ZY369   Irish News Center
• [U-Boot] [Patch] bss section initialization on s3c44b0   Ming-Dien Chang
• [U-Boot] Ping on Coldfire patch status   Liew Tsi Chung-R5AAHP
• [U-Boot] coldFire: net: Question about the use of MCFFEC_TOUT_LOOP   Liew Tsi Chung-R5AAHP
• [U-Boot] [PATCH 04/10] mxc_nand: add nand driver for MX2/MX3   Ivo Clarysse
• [U-Boot] Congratulation...Dear Lucky Winner!!!   Hyundai Auto-Mobile Company
• [U-Boot] environement paramters with u-boot in nand   Cote, Sylvain
• [U-Boot] Current status of UBI?   Matthew L. Creech
• [U-Boot] Current status of UBI?   Matthew L. Creech
• [U-Boot] Unable to debug UBOOT   Vivek DALAL
• [U-Boot] Unable to debug UBOOT   Vivek DALAL
• [U-Boot] Booting uboot from Onenand   Vivek DALAL
• [U-Boot] Add a new command to U-Boot   Drasko DRASKOVIC
• [U-Boot] MAC Address reading procedure in board.c   Drasko DRASKOVIC
• [U-Boot] MAC Address reading procedure in board.c   Drasko DRASKOVIC
• [U-Boot] itoa(), base of 16   Drasko DRASKOVIC
• [U-Boot] uboot relocate_code() function   Liu Dave-R63238
• [U-Boot] Does U-BOOT (MPC8560) support Micron MT18VDD12872DG   Liu Dave-R63238
• [U-Boot] DDR2 configuration in MPC85xx   Liu Dave-R63238
• [U-Boot] Memory problems on mpc8572ds   Liu Dave-R63238
• [U-Boot] DDR2 configuration in MPC85xx   Liu Dave-R63238
• [U-Boot] DDR2 configuration in MPC85xx   Liu Dave-R63238
• [U-Boot] Enable Autoboot   Liu Dave-R63238
• [U-Boot] uBoot Debug: GPIO Toggling does not working over 8536DSuboot   Liu Dave-R63238
• [U-Boot] Please help for Data TLB Error in MPC8544   Liu Dave-R63238
• [U-Boot] Please help for Data TLB Error in MPC8544   Liu Dave-R63238
• [U-Boot] beagleboard, and building only host tools from u-boot   Robert P. J. Day
• [U-Boot] OMAP3: Pending patches   Wolfgang Denk
• [U-Boot] [PATCH 1/8] Add simple hwconfig infrastructure   Wolfgang Denk
• [U-Boot] apollon board broken   Wolfgang Denk
• [U-Boot] [PATCH 1/8] Add simple hwconfig infrastructure   Wolfgang Denk
• [U-Boot] Disable features   Wolfgang Denk
• [U-Boot] Patch "at91: add support for the PM9263 board" breaks all arm926ejs boards   Wolfgang Denk
• [U-Boot] Disable features   Wolfgang Denk
• [U-Boot] [PATCH] at91: remove lowlevel_init.S   Wolfgang Denk
• [U-Boot] U-boot -printk kernel crash dump using md on PDK   Wolfgang Denk
• [U-Boot] [PATCH] at91: remove lowlevel_init.S   Wolfgang Denk
• [U-Boot] [PATCH] at91: remove lowlevel_init.S   Wolfgang Denk
• [U-Boot] [STATUS] v2009.06-rc1 is out   Wolfgang Denk
• [U-Boot] [STATUS] v2009.06-rc1 is out   Wolfgang Denk
• [U-Boot] Ping on Coldfire patch status   Wolfgang Denk
• [U-Boot] [PATCH V2] arm: timer and interrupt init rework   Wolfgang Denk
• [U-Boot] Cross-compiling U-Boot on Mac OS X -- can't find crc32.c?   Wolfgang Denk
• [U-Boot] [PATCH V2] arm: timer and interrupt init rework   Wolfgang Denk
• [U-Boot] [PATCH 1/1] arm: clean sizes.h   Wolfgang Denk
• [U-Boot] [PATCH 2/2] arm/dcc: add xcale support   Wolfgang Denk
• [U-Boot] [PATCH 1/2] arm/dcc: use static support to allow to use it at anytime   Wolfgang Denk
• [U-Boot] [PATCH 1/3] versatile: config coding style cleanup   Wolfgang Denk
• [U-Boot] [PATCH V2] arm: timer and interrupt init rework   Wolfgang Denk
• [U-Boot] [PATCH] ARM DaVinci:Adding DM365 Support   Wolfgang Denk
• [U-Boot] [PATCH 1/1] arm: clean sizes.h   Wolfgang Denk
• [U-Boot] [PATCH 1/1] arm: clean sizes.h   Wolfgang Denk
• [U-Boot] [RFC PATCH] console/device: rework function naming   Wolfgang Denk
• [U-Boot] U-boot snapshot for commit dfc91c33957c95da34e3888dc87912d5c15a7603   Wolfgang Denk
• [U-Boot] [RFC PATCH] console/device: rework function naming   Wolfgang Denk
• [U-Boot] [RFC PATCH] console/device: rework function naming   Wolfgang Denk
• [U-Boot] [PATCH v4] Marvell Kirkwood family SOC support   Wolfgang Denk
• [U-Boot] [PATCH v4] Marvell MV88F6281GTW_GE Board support   Wolfgang Denk
• [U-Boot] [PATCH] ARM DaVinci:Adding DM365 Support   Wolfgang Denk
• [U-Boot] AMCC 405EX Trap   Wolfgang Denk
• [U-Boot] USB to serial support at uboot level   Wolfgang Denk
• [U-Boot] Not able to print env variable added in standalone application   Wolfgang Denk
• [U-Boot] [PATCH] ARM: unbreak PXA build by defining UP2OCR   Wolfgang Denk
• [U-Boot] Ping on Coldfire patch status   Wolfgang Denk
• [U-Boot] [PATCH] include/ns16550.h: Unify structure declaration for registers   Wolfgang Denk
• [U-Boot] [PATCH v6] Marvell Kirkwood family SOC support   Wolfgang Denk
• [U-Boot] [PATCH v6] Marvell Kirkwood family SOC support   Wolfgang Denk
• [U-Boot] [PATCH] ARM: unbreak PXA build by defining UP2OCR   Wolfgang Denk
• [U-Boot] USB to serial support at uboot level   Wolfgang Denk
• [U-Boot] [PATCH] OMAP3EVM: Set default bootfile   Wolfgang Denk
• [U-Boot] [PATCH] ARM: unbreak PXA build by defining UP2OCR   Wolfgang Denk
• [U-Boot] [PATCH] ARM: unbreak PXA build by defining UP2OCR   Wolfgang Denk
• [U-Boot] U-BOOT kgdb support for ARM920T (s3c2440)   Wolfgang Denk
• [U-Boot] PATCH arm920t kgdb serial support   Wolfgang Denk
• [U-Boot] [PATCH 1/1] at91: Add command to control up to 3 GPIO LEDs from the console   Wolfgang Denk
• [U-Boot] [PATCH v2] mtd: nand: new base driver for memory mapped nand devices   Wolfgang Denk
• [U-Boot] [PATCH v3] mtd: nand: new base driver for memory mapped nand devices   Wolfgang Denk
• [U-Boot] [PATCH 02/10] serial_mx31: allow it to work with mx27 too   Wolfgang Denk
• [U-Boot] [PATCH 01/10] mx27: basic cpu support   Wolfgang Denk
• [U-Boot] [PATCH 03/10] fec_imx27: driver for FEC ethernet controller on i.MX27   Wolfgang Denk
• [U-Boot] [PATCH 04/10] mxc_nand: add nand driver for MX2/MX3   Wolfgang Denk
• [U-Boot] [PATCH 00/10] Support for LogicPD i.MX27-LITEKIT development board   Wolfgang Denk
• [U-Boot] [PATCH 10/10] imx27lite: add support for imx27lite board from LogicPD   Wolfgang Denk
• [U-Boot] QUESTION: How do I generate an assembly listing?   Wolfgang Denk
• [U-Boot] How to change the entry point for standalone Applications same as the text section base address   Wolfgang Denk
• [U-Boot] [PATCH 1/1] at91: Add command to control up to 3 GPIO LEDs from the console   Wolfgang Denk
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Wolfgang Denk
• [U-Boot] [PATCH] OMAP3EVM: net_chip uses CS5 not CS6   Wolfgang Denk
• [U-Boot] [PATCH] ppc4xx: Add Sequoia RAM-booting target   Wolfgang Denk
• [U-Boot] [PATCH] OMAP3EVM: net_chip uses CS5 not CS6   Wolfgang Denk
• [U-Boot] [PATCH] ppc4xx: Add Sequoia RAM-booting target   Wolfgang Denk
• [U-Boot] [PATCH] OMAP3EVM: net_chip uses CS5 not CS6   Wolfgang Denk
• [U-Boot] [PATCH] ARM: unbreak PXA build by defining UP2OCR   Wolfgang Denk
• [U-Boot] [PATCH] OMAP3EVM: net_chip uses CS5 not CS6   Wolfgang Denk
• [U-Boot] Unable to debug UBOOT   Wolfgang Denk
• [U-Boot] Auto Boot ELF image using NFS   Wolfgang Denk
• [U-Boot] [PATCH] OMAP3EVM: net_chip uses CS5 not CS6   Wolfgang Denk
• [U-Boot] [PATCH 2/3] OMAP3: Rename interrupts.c to timer.c   Wolfgang Denk
• [U-Boot] [PATCH 1/3] console.h: remove non implement function : console_realloc   Wolfgang Denk
• [U-Boot] [PATCH 2/3] console: unify printing current devices   Wolfgang Denk
• [U-Boot] [RFC PATCH 3/3 V2] stdio/device: rework function naming convention   Wolfgang Denk
• [U-Boot] [PATCH 3/6] s3c4510b: move interrupts code to soc   Wolfgang Denk
• [U-Boot] [PATCH 00/29] Rework MPC512x Support   Wolfgang Denk
• [U-Boot] [PATCH 01/29] mpc512x: change cpu/mpc512x/Makefile to use Kconfig style   Wolfgang Denk
• [U-Boot] [PATCH 02/29] mpc512x: Move common files to share them by several boards   Wolfgang Denk
• [U-Boot] [PATCH 03/29] cpu/mpc512x/pci.c: minor coding style cleanup   Wolfgang Denk
• [U-Boot] [PATCH 04/29] cpu/mpc512x/diu.c: fix warning: assignment from incompatible pointer type   Wolfgang Denk
• [U-Boot] [PATCH 05/29] Rename ads5121 board into mpc5121ads   Wolfgang Denk
• [U-Boot] [PATCH 06/29] MPC512x: add more hardware description to immap_512x.h   Wolfgang Denk
• [U-Boot] [PATCH 07/29] mpc5121ads: use I/O accessors instead of pointer accesses   Wolfgang Denk
• [U-Boot] [PATCH 08/29] MPC512x: add support for ARIA board   Wolfgang Denk
• [U-Boot] [PATCH 09/29] cpu/mpc512x/iopin.c: convert to use I/O acessors.   Wolfgang Denk
• [U-Boot] [PATCH 10/29] cpu/mpc512x/iopin.c: remove redundant include of <asm/immap_512x.h>   Wolfgang Denk
• [U-Boot] [PATCH 11/29] MPC512x: prepare removal of include/mpc512x.h   Wolfgang Denk
• [U-Boot] [PATCH 12/29] include/configs/mpc5121ads.h: prepare removal of include/mpc512x.h   Wolfgang Denk
• [U-Boot] [PATCH 13/29] include/configs/aria.h: prepare removal of include/mpc512x.h   Wolfgang Denk
• [U-Boot] [PATCH 14/29] common/cmd_ide.c: prepare removal of include/mpc512x.h   Wolfgang Denk
• [U-Boot] [PATCH 15/29] cpu/mpc512x/cpu.c: prepare removal of include/mpc512x.h   Wolfgang Denk
• [U-Boot] [PATCH 16/29] cpu/mpc512x/cpu_init.c: prepare removal of include/mpc512x.h   Wolfgang Denk
• [U-Boot] [PATCH 17/29] cpu/mpc512x/cpu_init.c: use I/O accessors instead of pointer accesses   Wolfgang Denk
• [U-Boot] [PATCH 18/29] cpu/mpc512x/speed.c: prepare removal of include/mpc512x.h   Wolfgang Denk
• [U-Boot] [PATCH 19/29] cpu/mpc512x/speed.c: use I/O accessors instead of pointer accesses   Wolfgang Denk
• [U-Boot] [PATCH 20/29] cpu/mpc512x/serial.c: use I/O accessors instead of pointer accesses   Wolfgang Denk
• [U-Boot] [PATCH 21/29] cpu/mpc512x/i2c.c: prepare removal of include/mpc512x.h   Wolfgang Denk
• [U-Boot] [PATCH 22/29] cpu/mpc512x/i2c.c: use immr offsets from C struct instead of #define   Wolfgang Denk
• [U-Boot] [PATCH 23/29] cpu/mpc512x/i2c.c: use I/O accessors instead of pointer accesses   Wolfgang Denk
• [U-Boot] [PATCH 24/29] cpu/mpc512x/pci.c: use I/O accessors instead of pointer accesses   Wolfgang Denk
• [U-Boot] [PATCH 25/29] drivers/net/mpc512x_fec.c: prepare removal of include/mpc512x.h   Wolfgang Denk
• [U-Boot] [PATCH 26/29] MPC512x FEC: remove duplicated code and data types   Wolfgang Denk
• [U-Boot] [PATCH 27/29] drivers/net/mpc512x_fec.c: use I/O accessors instead of pointer accesses   Wolfgang Denk
• [U-Boot] [PATCH 28/29] MPC512x FEC: get rid of duplicated struct ethernet_regs   Wolfgang Denk
• [U-Boot] [PATCH 29/29] Remove include/mpc512x.h   Wolfgang Denk
• [U-Boot] [PATCH 22/29] cpu/mpc512x/i2c.c: use immr offsets from C struct instead of #define   Wolfgang Denk
• [U-Boot] [PATCH 22/29] cpu/mpc512x/i2c.c: use immr offsets from C struct instead of #define   Wolfgang Denk
• [U-Boot] [PATCH 08/29] MPC512x: add support for ARIA board   Wolfgang Denk
• [U-Boot] [RFC PATCH 3/3 V2] stdio/device: rework function naming convention   Wolfgang Denk
• [U-Boot] [PATCH 3/6] s3c4510b: move interrupts code to soc   Wolfgang Denk
• [U-Boot] Please pull u-boot-i2c.git next branch   Wolfgang Denk
• [U-Boot] Please pull u-boot-ppc4xx/next   Wolfgang Denk
• [U-Boot] Pull request u-boot-blackfin.git   Wolfgang Denk
• [U-Boot] [PATCH v2] tools/envcrc: add --binary option to export embedded env   Wolfgang Denk
• [U-Boot] [PATCH v2 3/3] MX31: Add NAND SPL boot support to i.MX31 PDK board.   Wolfgang Denk
• [U-Boot] [PATCH 1/1] mips: unify lds   Wolfgang Denk
• [U-Boot] [PATCH v2 3/3] MX31: Add NAND SPL boot support to i.MX31 PDK board.   Wolfgang Denk
• [U-Boot] [PATCH 2/3] OMAP3: Rename interrupts.c to timer.c   Wolfgang Denk
• [U-Boot] [PATCH 5/6] fix ‘x86/video_bios: probe_pci_video’ defined but not used   Wolfgang Denk
• [U-Boot] [PATCH 4/6] x86: fix pci large integer implicitly truncated to unsigned type   Wolfgang Denk
• [U-Boot] [PATCH 08/29] MPC512x: add support for ARIA board   Wolfgang Denk
• [U-Boot] [PATCH v2] ppc4xx: Add Sequoia RAM-booting target   Wolfgang Denk
• [U-Boot] Data transfer through Ethernet in u-boot.   Wolfgang Denk
• [U-Boot] Data transfer through Ethernet in u-boot.   Wolfgang Denk
• [U-Boot] [PATCH v2] ppc4xx: Add Sequoia RAM-booting target   Wolfgang Denk
• [U-Boot] [PATCH 1/4] net: extend the netdev to have a common way to set the hw mac address   Wolfgang Denk
• [U-Boot] [PATCH v2] ppc4xx: Add Sequoia RAM-booting target   Wolfgang Denk
• [U-Boot] [PATCH 1/4] net: extend the netdev to have a common way to set the hw mac address   Wolfgang Denk
• [U-Boot] [PATCH 1/4] net: extend the netdev to have a common way to set the hw mac address   Wolfgang Denk
• [U-Boot] [PATCH 1/4] net: extend the netdev to have a common way to set the hw mac address   Wolfgang Denk
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Wolfgang Denk
• [U-Boot] [PATCH] cmd_mtdparts: Move to common handling of FLASH devices via MTD layer   Wolfgang Denk
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Wolfgang Denk
• [U-Boot] [PATCH] MPC8260: fixup device tree by property instead of path   Wolfgang Denk
• [U-Boot] [PATCH v2] MPC8260: fixup device tree by property instead of path   Wolfgang Denk
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Wolfgang Denk
• [U-Boot] Timeout in tftp.c   Wolfgang Denk
• [U-Boot] [PATCH 05/29] Rename ads5121 board into mpc5121ads   Wolfgang Denk
• [U-Boot] [PATCH 00/29] Rework MPC512x Support   Wolfgang Denk
• [U-Boot] [PATCH] arm/imx31_phycore: Fix bi_arch_number   Wolfgang Denk
• [U-Boot] [PATCHv2 3/4] omap3: replace all instances of gpmc config struct by one global   Wolfgang Denk
• [U-Boot] [PATCH] arm/imx31_phycore: Fix bi_arch_number   Wolfgang Denk
• [U-Boot] [PATCH] common/cmd_ide.c: Coding style cleanup (Lindent)   Wolfgang Denk
• [U-Boot] [PATCH] common/cmd_ide.c: Coding style cleanup (Lindent)   Wolfgang Denk
• [U-Boot] [PATCH 01/10] mx27: basic cpu support   Wolfgang Denk
• [U-Boot] map mtd partitions address for TWO NOR flash   Wolfgang Denk
• [U-Boot] [PATCH 01/10] mx27: basic cpu support   Wolfgang Denk
• [U-Boot] [PATCH 01/10] mx27: basic cpu support   Wolfgang Denk
• [U-Boot] [PATCH] video: ct6900: Add an option to skip video initialization   Wolfgang Denk
• [U-Boot] [PATCH] cmd_ide: Fix detection problem with missing devices   Wolfgang Denk
• [U-Boot] [PATCH 01/10] mx27: basic cpu support   Wolfgang Denk
• [U-Boot] [PATCH] video: ct6900: Add an option to skip video initialization   Wolfgang Denk
• [U-Boot] [PATCH] cmd_ide: Fix detection problem with missing devices   Wolfgang Denk
• [U-Boot] [PATCH] video: ct6900: Add an option to skip video initialization   Wolfgang Denk
• [U-Boot] uboot kernel rejects filesystem   Wolfgang Denk
• [U-Boot] environement paramters with u-boot in nand   Wolfgang Denk
• [U-Boot] [PATCH] cmd_ide: Fix detection problem with missing devices   Wolfgang Denk
• [U-Boot] [PATCH] IDE: bail out of dev_print() for unknow device types   Wolfgang Denk
• [U-Boot] [PATCH v2] IDE: bail out of dev_print() for unknown device types   Wolfgang Denk
• [U-Boot] [PATCH 0/3] TQM834x: configuration update   Wolfgang Denk
• [U-Boot] [PATCH 1/3] TQM834x: fix environment size; add redundant env.   Wolfgang Denk
• [U-Boot] [PATCH 2/3] TQM834x: add FDT support   Wolfgang Denk
• [U-Boot] [PATCH 3/3] TQM834x: use buffered writes to accelerate writing to flash   Wolfgang Denk
• [U-Boot] environement paramters with u-boot in nand   Wolfgang Denk
• [U-Boot] [PATCH] TQM85xx: adapt for new flash types   Wolfgang Denk
• [U-Boot] [PATCH] TQM85xx: minor config file cleanup   Wolfgang Denk
• [U-Boot] [PATCH] Redundant Environment: protect full sector size   Wolfgang Denk
• [U-Boot] [PATCH] video: ct6900: Add an option to skip video initialization   Wolfgang Denk
• [U-Boot] [PATCH 3/3 v2] TQM834x: use buffered writes to accelerate writing to flash   Wolfgang Denk
• [U-Boot] [PATCH 3/3] TQM834x: use buffered writes to accelerate writing to flash   Wolfgang Denk
• [U-Boot] [PATCH v2] IDE: bail out of dev_print() for unknown device types   Wolfgang Denk
• [U-Boot] [PATCH v3] IDE: bail out of dev_print() for unknown device types   Wolfgang Denk
• [U-Boot] [PATCH 0/2] drv_video_init() cleanup / extension   Wolfgang Denk
• [U-Boot] [PATCH 1/2] drv_video_init(): simplify logic   Wolfgang Denk
• [U-Boot] [PATCH 2/2] video: Add an option to skip video initialization   Wolfgang Denk
• [U-Boot] [PATCH 2/2] video: Add an option to skip video initialization   Wolfgang Denk
• [U-Boot] [PATCH 2/2] video: Add an option to skip video initialization   Wolfgang Denk
• [U-Boot] [PATCH 2/2] video: Add an option to skip video initialization   Wolfgang Denk
• [U-Boot] [PATCH v4] Separate mtdparts command from jffs2   Wolfgang Denk
• [U-Boot] Please pull u-boot-ppc4xx/next   Wolfgang Denk
• [U-Boot] ARM pull Request   Wolfgang Denk
• [U-Boot] [PATCH] 82xx, ids8247: added ids8247 board to MAKEALL script   Wolfgang Denk
• [U-Boot] [PATCH v4] netloop: updates for NetLoop   Wolfgang Denk
• [U-Boot] [PATCH v4] netloop: updates for NetLoop   Wolfgang Denk
• [U-Boot] [PATCH v6] Add imls utility command   Wolfgang Denk
• [U-Boot] [PATCH] powerpc/inka4x0: Remove left-over ide reset code.   Wolfgang Denk
• [U-Boot] [PATCH] Schedule removal of non-CONFIG_NET_MULTI net driver API   Wolfgang Denk
• [U-Boot] [PATCH 2/2] Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN   Wolfgang Denk
• [U-Boot] [PATCH 2/2] Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN   Wolfgang Denk
• [U-Boot] [PATCH 1/6] x86/pcat_timer: fix implicit declaration of function ‘unmask_irq’   Wolfgang Denk
• [U-Boot] [PATCH 6/6] eNET: fix MAKEALL   Wolfgang Denk
• [U-Boot] [PATCH 1/6] x86/pcat_timer: fix implicit declaration of function ‘unmask_irq’   Wolfgang Denk
• [U-Boot] [PATCH] lib_arch/board.c: Move malloc initialization before flash_init()   Wolfgang Denk
• [U-Boot] [PATCH] cmd_flash updates: Remove unneeded CONFIG_CMD_JFFS2   Wolfgang Denk
• [U-Boot] [PATCH 00/29] Rework MPC512x Support   Wolfgang Denk
• [U-Boot] [PATCH v2] MPC8260: fixup device tree by property instead of path   Wolfgang Denk
• [U-Boot] [PATCH] Remove inline qualifier from show_boot_progress()   Wolfgang Denk
• [U-Boot] [PATCH 00/29] Rework MPC512x Support   Wolfgang Denk
• [U-Boot] [PATCHv2 3/4] omap3: replace all instances of gpmc config struct by one global   Wolfgang Denk
• [U-Boot] [PATCH] Fix e-mail address of Gary Jennejohn.   Wolfgang Denk
• [U-Boot] [PATCH 1/1] api: remove un-needed ifdef CONFIG_API already handle by the Makefile   Wolfgang Denk
• [U-Boot] [PATCH 1/4 v4] console.h: remove unused prototype 'console_realloc'   Wolfgang Denk
• [U-Boot] [PATCH] 74xx_7xx: Fix rounding problem in CPU frequency calculation   Wolfgang Denk
• [U-Boot] [PATCH v3] IDE: bail out of dev_print() for unknown device types   Wolfgang Denk
• [U-Boot] Out-of-tree build of API code fails   Wolfgang Denk
• [U-Boot] ARM Pull Request for next   Wolfgang Denk
• [U-Boot] [STATUS] v2009.06-rc2 is out   Wolfgang Denk
• [U-Boot] [PATCH 1/2] drv_video_init(): simplify logic   Wolfgang Denk
• [U-Boot] Pull request: u-boot-video next   Wolfgang Denk
• [U-Boot] [GIT PULL] MIPS updates   Wolfgang Denk
• [U-Boot] [GIT PULL] MIPS updates   Wolfgang Denk
• [U-Boot] [PATCH v2 00/10] Rework MPC512x Support   Wolfgang Denk
• [U-Boot] [PATCH v2 01/10] mpc512x: change cpu/mpc512x/Makefile to use Kconfig style   Wolfgang Denk
• [U-Boot] [PATCH v2 02/10] mpc512x: Move common files to share them by several boards   Wolfgang Denk
• [U-Boot] [PATCH v2 03/10] cpu/mpc512x/pci.c: minor coding style cleanup   Wolfgang Denk
• [U-Boot] [PATCH v2 04/10] cpu/mpc512x/diu.c: fix warning: assignment from incompatible pointer type   Wolfgang Denk
• [U-Boot] [PATCH v2 05/10] Rename ads5121 board into mpc5121ads   Wolfgang Denk
• [U-Boot] [PATCH v2 06/10] MPC512x: add more hardware description to immap_512x.h   Wolfgang Denk
• [U-Boot] [PATCH v2 07/10] MPC512x: use I/O accessors instead of pointer accesses   Wolfgang Denk
• [U-Boot] [PATCH v2 08/10] MPC512x FEC: get rid of duplicated struct ethernet_regs   Wolfgang Denk
• [U-Boot] [PATCH v2 09/10] MPC512x: remove include/mpc512x.h   Wolfgang Denk
• [U-Boot] [PATCH v2 10/10] MPC512x: add support for ARIA board   Wolfgang Denk
• [U-Boot] ARM Pull Request for next   Wolfgang Denk
• [U-Boot] [RFC/PATCH] jffs2/mtdparts: Fix problem with usage from JFFS2 and MTDPARTS together   Wolfgang Denk
• [U-Boot] [PATCH] cmd_mtdparts.c: allow to omit definitions for default settings   Wolfgang Denk
• [U-Boot] new cpu(Ingenic), new board(PI)   Wolfgang Denk
• [U-Boot] [RFC/PATCH] jffs2/mtdparts: Fix problem with usage from JFFS2 and MTDPARTS together   Wolfgang Denk
• [U-Boot] [RFC/PATCH] jffs2/mtdparts: Fix problem with usage from JFFS2 and MTDPARTS together   Wolfgang Denk
• [U-Boot] [PATCH 1/1] arm: unify some CONFIGs   Wolfgang Denk
• [U-Boot] Booting X86 using uboot   Wolfgang Denk
• [U-Boot] Ethernet not working on OMAP3 board with   Wolfgang Denk
• [U-Boot] [RFC/PATCH] Add support for Linux-like kallsysms   Wolfgang Denk
• [U-Boot] Enable Autoboot   Wolfgang Denk
• [U-Boot] make U-Boot quiet   Wolfgang Denk
• [U-Boot] u-boot version   Wolfgang Denk
• [U-Boot] Not getting the Uboot prompt for sbc2410x using u-boot1.1.6   Wolfgang Denk
• [U-Boot] [PATCH 01/10] mx27: basic cpu support   Wolfgang Denk
• [U-Boot] [PATCH] ARM DaVinci Leopard Board Support   Wolfgang Denk
• [U-Boot] [RFC] API Licence   Wolfgang Denk
• [U-Boot] [PATCH v7] Marvell Kirkwood family SOC support   Wolfgang Denk
• [U-Boot] how to use a function provided by u-boot in linux driver   Wolfgang Denk
• [U-Boot] [PATCH 1/1] SMC911x driver fixed for NFS boot   Wolfgang Denk
• [U-Boot] [PATCH v8] Marvell Kirkwood family SOC support   Wolfgang Denk
• [U-Boot] Cross-compiling U-Boot on Mac OS X -- can't find crc32.c?   Wolfgang Denk
• [U-Boot] [PATCH v9] Marvell MV88F6281GTW_GE Board support   Wolfgang Denk
• [U-Boot] [PATCH v2 05/10] Rename ads5121 board into mpc5121ads   Wolfgang Denk
• [U-Boot] Which U-Boot releases have Device Tree support   Wolfgang Denk
• [U-Boot] [PATCH v8] Marvell Kirkwood family SOC support   Wolfgang Denk
• [U-Boot] Support in u-boot for PCI-Express NIC   Wolfgang Denk
• [U-Boot] [PATCH v9] Marvell MV88F6281GTW_GE Board support   Wolfgang Denk
• [U-Boot] [PATCH v8] Marvell Kirkwood family SOC support   Wolfgang Denk
• [U-Boot] [PATCH 06/15] drivers/qe: Change QE RISC ALLOCATION to support 4 RISCs   Wolfgang Denk
• [U-Boot] [PATCH 10/15] Update the number of ethxaddr in reading system eeprom   Wolfgang Denk
• [U-Boot] [PATCH 11/15] MPC85xx: update uec to support up to 8 UECs in QE   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc83xx next   Wolfgang Denk
• [U-Boot] [PATCH 1/2] TQM834x: remove defines causing gcc4.4 warnings   Wolfgang Denk
• [U-Boot] [PATCH 2/2] common: fix inline--weak error spotted by gcc 4.4   Wolfgang Denk
• [U-Boot] Pull request u-boot-blackfin.git   Wolfgang Denk
• [U-Boot] Please pull u-boot-ppc4xx   Wolfgang Denk
• [U-Boot] Please pull u-boot-ubi - was Re: Please pull u-boot-ppc4xx   Wolfgang Denk
• [U-Boot] LZMA warnings in cmd_bootm   Wolfgang Denk
• [U-Boot] Which U-Boot releases have Device Tree support   Wolfgang Denk
• [U-Boot] Support in u-boot for PCI-Express NIC   Wolfgang Denk
• [U-Boot] [PATCH 10/15 v2] Update the number of ethxaddr in reading system eeprom   Wolfgang Denk
• [U-Boot] Auto-booting problem   Wolfgang Denk
• [U-Boot] [PATCH] Marvell Sheevaplug Board support   Wolfgang Denk
• [U-Boot] [PATCH v10] Marvell MV88F6281GTW_GE Board support   Wolfgang Denk
• [U-Boot] [PATCH v10] Marvell MV88F6281GTW_GE Board support   Wolfgang Denk
• [U-Boot] [PATCH] Marvell Sheevaplug Board support   Wolfgang Denk
• [U-Boot] ARM next Pull Request   Wolfgang Denk
• [U-Boot] [RFC] initcall mechanism introduction   Wolfgang Denk
• [U-Boot] [PATCH 3/3] net: switch device init to initcall   Wolfgang Denk
• [U-Boot] [PATCH 1/3] fix: missing autoconfig.mk from general Makefile   Wolfgang Denk
• [U-Boot] [RFC] initcall mechanism introduction   Wolfgang Denk
• [U-Boot] [PATCH] nand/onenand: Fix missing argument checking for "markbad" command   Wolfgang Denk
• [U-Boot] [RFC] initcall mechanism introduction   Wolfgang Denk
• [U-Boot] [PATCH 1/3] fix: missing autoconfig.mk from general Makefile   Wolfgang Denk
• [U-Boot] [PATCH 1/2] Make "usage" messages more helpful.   Wolfgang Denk
• [U-Boot] [PATCH 2/2] General help message cleanup   Wolfgang Denk
• [U-Boot] ARM next Pull Request   Wolfgang Denk
• [U-Boot] [PATCH 1/2] 83xx: Replace CONFIG_MPC83XX with CONFIG_MPC83xx   Wolfgang Denk
• [U-Boot] [PATCH 1/2] 83xx: Replace CONFIG_MPC83XX with CONFIG_MPC83xx   Wolfgang Denk
• [U-Boot] [PATCHv3 3/5] omap3: remove typedefs for configuration structs   Wolfgang Denk
• [U-Boot] ARM next Pull Request   Wolfgang Denk
• [U-Boot] [Resend PATCH] afeb9260: fix macb device init   Wolfgang Denk
• [U-Boot] Please pull ppc4xx   Wolfgang Denk
• [U-Boot] [RFC/PATCH] jffs2/mtdparts: Fix problem with usage from JFFS2 and MTDPARTS together   Wolfgang Denk
• [U-Boot] ARM next Pull Request   Wolfgang Denk
• [U-Boot] Question about U-Boot porting based on MPC852T   Wolfgang Denk
• [U-Boot] [PATCH] at91: Add support for MEESC board of esd gmbh   Wolfgang Denk
• [U-Boot] U-boot and linux command line parameters   Wolfgang Denk
• [U-Boot] U-boot and linux command line parameters   Wolfgang Denk
• [U-Boot] [PATCH] at91: Add support for MEESC board of esd gmbh   Wolfgang Denk
• [U-Boot] (no subject)   Wolfgang Denk
• [U-Boot] MAC Address reading procedure in board.c   Wolfgang Denk
• [U-Boot] [PATCH] avr32: unified u-boot.lds   Wolfgang Denk
• [U-Boot] [PATCH 1/7] mx27: basic cpu support   Wolfgang Denk
• [U-Boot] [PATCH 1/4] Support multiple CONFIG_ENV options in a single build.   Wolfgang Denk
• [U-Boot] [PATCH 2/4] Support run-time disabling of NAND and OneNAND memories.   Wolfgang Denk
• [U-Boot] [PATCH 3/4] Support run-time disabling of u-boot commands.   Wolfgang Denk
• [U-Boot] [PATCH 4/4] Support NAND and OneNAND memories on the OMAP3 EVM.   Wolfgang Denk
• [U-Boot] [RFC] initcall mechanism introduction   Wolfgang Denk
• [U-Boot] [RFC] initcall mechanism introduction   Wolfgang Denk
• [U-Boot] [RFC] initcall mechanism introduction   Wolfgang Denk
• [U-Boot] [RFC PATCH 1/2] sh: make lds more generic   Wolfgang Denk
• [U-Boot] [PATCH 00/29] Rework MPC512x Support   Wolfgang Denk
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Wolfgang Denk
• [U-Boot] [RFC/PATCH] jffs2/mtdparts: Fix problem with usage from JFFS2 and MTDPARTS together   Wolfgang Denk
• [U-Boot] Pull request u-boot-blackfin.git   Wolfgang Denk
• [U-Boot] Please pull u-boot-ppc4xx/next   Wolfgang Denk
• [U-Boot] [PATCH v2 08/10] MPC512x FEC: get rid of duplicated struct ethernet_regs   Wolfgang Denk
• [U-Boot] [PATCH 10/10] imx27lite: add support for imx27lite board from LogicPD   Wolfgang Denk
• [U-Boot] [PATCH v2 08/10] MPC512x FEC: get rid of duplicated struct ethernet_regs   Wolfgang Denk
• [U-Boot] Turning optimizations off   Wolfgang Denk
• [U-Boot] [PATCH 7/7] imx27lite: add support for imx27lite board from LogicPD   Wolfgang Denk
• [U-Boot] [PATCH 1/7] mx27: basic cpu support   Wolfgang Denk
• [U-Boot] [PATCH 1/7] mx27: basic cpu support   Wolfgang Denk
• [U-Boot] [PATCH 4/7] mxc_nand: add nand driver for MX2/MX3   Wolfgang Denk
• [U-Boot] Please pull u-boot-ppc4xx/next   Wolfgang Denk
• [U-Boot] hi,guys,about the nand flash driver   Wolfgang Denk
• [U-Boot] [PATCH 4/7] mxc_nand: add nand driver for MX2/MX3   Wolfgang Denk
• [U-Boot] [PATCH] spi: Add Marvell Kirkwood SPI driver   Wolfgang Denk
• [U-Boot] [PATCH] net: Add Marvell Kirkwood gigabit ethernet driver   Wolfgang Denk
• [U-Boot] [PATCH] cpu_misc_init support for ARM architectures   Wolfgang Denk
• [U-Boot] [PATCH] Marvell MV88F6281GTW_GE Board support   Wolfgang Denk
• [U-Boot] [PATCH] Marvell Sheevaplug Board support   Wolfgang Denk
• [U-Boot] [PATCH v2] Marvell Sheevaplug Board support   Wolfgang Denk
• [U-Boot] Congratulations   © Winner Draws
• [U-Boot] TICKET NO:1110008342   ©DELL ELECTRONICS
• [U-Boot] Timeout in tftp.c   Achim Ehrlich
• [U-Boot] Timeout in tftp.c   Achim Ehrlich
• [U-Boot] Timeout in tftp.c   Achim Ehrlich
• [U-Boot] Timeout in tftp.c   Achim Ehrlich
• [U-Boot] AMCC 405EX Trap   Grant Erickson
• [U-Boot] AMCC 405EX Trap   Grant Erickson
• [U-Boot] U-boot -printk kernel crash dump using md on PDK   Fabio Estevam
• [U-Boot] U-boot -printk kernel crash dump using md on PDK   Fabio Estevam
• [U-Boot] LOAN APPLICATION   JMC LOAN FIRM
• [U-Boot] [PATCH v2 05/10] Rename ads5121 board into mpc5121ads   Arno Fischer
• [U-Boot] [PATCH 00/29] Rework MPC512x Support   Arno Fischer
• [U-Boot] [PATCH] Rename CONFIG_SYS_MDDRC memory constants for ADS5121   Arno Fischer
• [U-Boot] [PATCH 4/6] fsl_esdhc: Add device tree fixups   Andy Fleming
• [U-Boot] [PATCH] mmc: Remove return from mmc_init for non SD 2.0 compatible cards.   Andy Fleming
• [U-Boot] [PATCH] mmc: Fix decoding of SCR & function switch data on little-endian machines   Andy Fleming
• [U-Boot] [PATCH 07/10] mmc: use lldiv() for 64-bit division   Andy Fleming
• [U-Boot] [PATCH 08/10] mmc: some endianess fixes for generic mmc subsystem   Andy Fleming
• [U-Boot] [PATCH 09/10] mmc: fix mmcinfo command   Andy Fleming
• [U-Boot] [PATCH 6/7] arm: add support for CONFIG_GENERIC_MMC   Andy Fleming
• [U-Boot] [PATCH] spi: Add Marvell Kirkwood SPI driver   Andy Fleming
• [U-Boot] PPC + NatSemi dp83640 phy?   Nathan French
• [U-Boot] 1-80 in 6 days 17 hours   Mike Frysinger
• [U-Boot] [PATCH 1/1] V2 Add config option for disabling DM9000-SROM support.   Mike Frysinger
• [U-Boot] Cross-compiling U-Boot on Mac OS X -- can't find crc32.c?   Mike Frysinger
• [U-Boot] What mkimage arguments for standalone AVR32 app?   Mike Frysinger
• [U-Boot] What mkimage arguments for standalone AVR32 app?   Mike Frysinger
• [U-Boot] [PATCH 1/3] smc911x: write back the manually set MAC address   Mike Frysinger
• [U-Boot] Micrel Switch KS8995M Driver   Mike Frysinger
• [U-Boot] [PATCH v2] tools/envcrc: add --binary option to export embedded env   Mike Frysinger
• [U-Boot] [PATCH 0/5] Blackfin fixes for 2009.06   Mike Frysinger
• [U-Boot] [PATCH 1/5] Blackfin: recurse with early serial initcode   Mike Frysinger
• [U-Boot] [PATCH 2/5] Blackfin: fix booting with older bootroms (no EVT1)   Mike Frysinger
• [U-Boot] [PATCH 3/5] Blackfin: avoid get_sclk() with early serial debug   Mike Frysinger
• [U-Boot] [PATCH 4/5] Blackfin: bf527-ezkit: fix SPI flash env params   Mike Frysinger
• [U-Boot] [PATCH 5/5] Blackfin: bf518f-ezbrd: reset ethernet PHY during init   Mike Frysinger
• [U-Boot] [PATCH v2] mtd: nand: new base driver for memory mapped nand devices   Mike Frysinger
• [U-Boot] SD Card Support   Mike Frysinger
• [U-Boot] [PATCH v2] mtd: nand: new base driver for memory mapped nand devices   Mike Frysinger
• [U-Boot] [PATCH v2] mtd: nand: new base driver for memory mapped nand devices   Mike Frysinger
• [U-Boot] [PATCH v3] mtd: nand: new base driver for memory mapped nand devices   Mike Frysinger
• [U-Boot] [PATCH v3] mtd: nand: new base driver for memory mapped nand devices   Mike Frysinger
• [U-Boot] [PATCH 1/1] at91: Add command to control up to 3 GPIO LEDs from the console   Mike Frysinger
• [U-Boot] [PATCH v2] mtd: nand: new base driver for memory mapped nand devices   Mike Frysinger
• [U-Boot] [PATCH v4] mtd: nand: new base driver for memory mapped nand devices   Mike Frysinger
• [U-Boot] MII register display   Mike Frysinger
• [U-Boot] MII register display   Mike Frysinger
• [U-Boot] Pull request u-boot-blackfin.git   Mike Frysinger
• [U-Boot] [PATCH 1/4] net: extend the netdev to have a common way to set the hw mac address   Mike Frysinger
• [U-Boot] [PATCH 1/4] net: extend the netdev to have a common way to set the hw mac address   Mike Frysinger
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Mike Frysinger
• [U-Boot] [PATCH 1/4] net: extend the netdev to have a common way to set the hw mac address   Mike Frysinger
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Mike Frysinger
• [U-Boot] [PATCH 1/4] net: extend the netdev to have a common way to set the hw mac address   Mike Frysinger
• [U-Boot] [PATCH 3/4] net/dm9000: move the CONFIG_NET_MULTI api   Mike Frysinger
• [U-Boot] [PATCH 1/4] net: extend the netdev to have a common way to set the hw mac address   Mike Frysinger
• [U-Boot] [PATCH 3/4] net/dm9000: move the CONFIG_NET_MULTI api   Mike Frysinger
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Mike Frysinger
• [U-Boot] [PATCH 1/4] net: extend the netdev to have a common way to set the hw mac address   Mike Frysinger
• [U-Boot] [PATCH 1/4] net: extend the netdev to have a common way to set the hw mac address   Mike Frysinger
• [U-Boot] [PATCH] lib_arch/board.c: Move malloc initialization before flash_init()   Mike Frysinger
• [U-Boot] [PATCH 1/4] net: extend the netdev to have a common way to set the hw mac address   Mike Frysinger
• [U-Boot] [PATCH v5] mtd: nand: new base driver for memory mapped nand devices   Mike Frysinger
• [U-Boot] [RFC/PATCH] Add support for Linux-like kallsysms   Mike Frysinger
• [U-Boot] [RFC/PATCH] allow boards to customize compiler options on a per-file/dir basis   Mike Frysinger
• [U-Boot] [RFC/PATCH v2] allow boards to customize compiler options on a per-file/dir basis   Mike Frysinger
• [U-Boot] [RFC/PATCH] Add support for Linux-like kallsysms   Mike Frysinger
• [U-Boot] [RFC] API Licence   Mike Frysinger
• [U-Boot] [RFC] API Licence   Mike Frysinger
• [U-Boot] [PATCH v2] Add support for Linux-like kallsysms   Mike Frysinger
• [U-Boot] LZMA warnings in cmd_bootm   Mike Frysinger
• [U-Boot] [PATCH] Blackfin: fix timer_init()/timer_reset()   Mike Frysinger
• [U-Boot] uboot-2009.06-rc1: git: seeing extra files in git status report.   Mike Frysinger
• [U-Boot] Writing a YAFFS image to NAND   Mike Frysinger
• [U-Boot] Pull request u-boot-blackfin.git   Mike Frysinger
• [U-Boot] [PATCH v3] Add support for Linux-like kallsysms   Mike Frysinger
• [U-Boot] [PATCH v3] Add support for Linux-like kallsysms   Mike Frysinger
• [U-Boot] LZMA warnings in cmd_bootm   Mike Frysinger
• [U-Boot] LDS Consolidation   Mike Frysinger
• [U-Boot] [PATCH] nvedit: speed up printing of environment   Mike Frysinger
• [U-Boot] [PATCH] Blackfin: bf518f-ezbrd: setup portmux for async flash   Mike Frysinger
• [U-Boot] [PATCH] config.mk: remove un-needed REMOTE_BUILD check   Mike Frysinger
• [U-Boot] [PATCH] config.mk: remove un-needed REMOTE_BUILD check   Mike Frysinger
• [U-Boot] Pull request u-boot-blackfin.git   Mike Frysinger
• [U-Boot] [PATCH v6] mtd: nand: new base driver for memory mapped nand devices   Mike Frysinger
• [U-Boot] [RFC] initcall mechanism introduction   Mike Frysinger
• [U-Boot] [PATCH] cpu_misc_init support for ARM architectures   Mike Frysinger
• [U-Boot] [PATCH] Blackfin: fix if() logic in bootrom evt1 check   Mike Frysinger
• [U-Boot] [PATCH] Blackfin: spi: fix pin handling of SPI0 SSEL4   Mike Frysinger
• [U-Boot] [PATCH/next] Blackfin: bfin_mac: do portmuxing earlier to allow board override   Mike Frysinger
• [U-Boot] Cross-compiling U-Boot on Mac OS X -- can't find crc32.c?   Mike Frysinger
• [U-Boot] [PATCH] compiler.h: unify system ifdef cruft here   Mike Frysinger
• [U-Boot] [PATCH] make sure toplevel $(SUBDIRS) is always declared   Mike Frysinger
• [U-Boot] [PATCH] at91: Add support for MEESC board of esd gmbh   Matthias Fuchs
• [U-Boot] USB to serial support at uboot level   Naveen Kumar GADDIPATI
• [U-Boot] USB to serial support at uboot level   Naveen Kumar GADDIPATI
• [U-Boot] help required for usbtty at uboot level   Naveen Kumar GADDIPATI
• [U-Boot] PATCH: bugfix for reading maximum TLB size on mpc85xx   Kumar Gala
• [U-Boot] [PATCH] 85xx: Added MPC8535/E identifiers   Kumar Gala
• [U-Boot] [PATCH] 85xx: Always attempt ethernet device tree fixup   Kumar Gala
• [U-Boot] [PATCH 3/6] mpc83xx: USB: Reorganized its support   Kumar Gala
• [U-Boot] Does U-BOOT (MPC8560) support Micron MT18VDD12872DG   Deepak Gaur
• [U-Boot] Timeout in tftp.c   Jens Gehrlein
• [U-Boot] Axiom MCF5282 help   Mark Giacobbe
• [U-Boot] Axiom MCF5282 help   Mark Giacobbe
• [U-Boot] Axiom MCF5282 help   Mark Giacobbe
• [U-Boot] Add a new command to U-Boot   Deepak Gopalakrishnan
• [U-Boot] Add a new command to U-Boot   Deepak Gopalakrishnan
• [U-Boot] Add a new command to U-Boot   Deepak Gopalakrishnan
• [U-Boot] Uboot reloaction scheme   Deepak Gopalakrishnan
• [U-Boot] uboot relocate_code() function   Deepak Gopalakrishnan
• [U-Boot] start.s file   Deepak Gopalakrishnan
• [U-Boot] u-boot version   Deepak Gopalakrishnan
• [U-Boot] u-boot version   Deepak Gopalakrishnan
• [U-Boot] U-boot common/environment.c   Deepak Gopalakrishnan
• [U-Boot] u-boot version   Deepak Gopalakrishnan
• [U-Boot] u-boot version   Deepak Gopalakrishnan
• [U-Boot] bootstrap nand write function   Deepak Gopalakrishnan
• [U-Boot] bootstrap nand write function   Deepak Gopalakrishnan
• [U-Boot] [PATCH 1/1] at91: Add command to control up to 3 GPIO LEDs from the console   Daniel Gorsulowski
• [U-Boot] [PATCH 1/1] at91: Add command to control up to 3 GPIO LEDs from the console   Daniel Gorsulowski
• [U-Boot] [PATCH 1/1] at91: Add command to control up to 3 GPIO LEDs from the console   Daniel Gorsulowski
• [U-Boot] [PATCH 1/1] at91: Add command to control up to 3 GPIO LEDs from the console   Daniel Gorsulowski
• [U-Boot] [PATCH 12/13] at91: add hardware i2c drivers   Daniel Gorsulowski
• [U-Boot] [PATCH 1/1] at91: Add command to control up to 3 GPIO LEDs from the console   Daniel Gorsulowski
• [U-Boot] [PATCH] at91: Add command to control GPIO LEDs from the console   Daniel Gorsulowski
• [U-Boot] [PATCH] at91: Extended soft_i2c driver for AT91SAM9263 SoC   Daniel Gorsulowski
• [U-Boot] [PATCH] at91: Add support for MEESC board of esd gmbh   Daniel Gorsulowski
• [U-Boot] [PATCH] at91: Add support for MEESC board of esd gmbh   Daniel Gorsulowski
• [U-Boot] [PATCH] at91: Extended soft_i2c driver for AT91SAM9263 SoC   Daniel Gorsulowski
• [U-Boot] [PATCH] video: ct6900: Add an option to skip video initialization   Anatolij Gustschin
• [U-Boot] [PATCH] video: ct6900: Add an option to skip video initialization   Anatolij Gustschin
• [U-Boot] [PATCH 2/2] video: Add an option to skip video initialization   Anatolij Gustschin
• [U-Boot] [PATCH 2/2] video: Add an option to skip video initialization   Anatolij Gustschin
• [U-Boot] [PATCH 2/2] video: Add an option to skip video initialization   Anatolij Gustschin
• [U-Boot] [PATCH 1/2] drv_video_init(): simplify logic   Anatolij Gustschin
• [U-Boot] [PATCH 2/2] video: Add an option to skip video initialization   Anatolij Gustschin
• [U-Boot] Pull request: u-boot-video next   Anatolij Gustschin
• [U-Boot] [PATCH] video: Add an option to skip video initialization   Anatolij Gustschin
• [U-Boot] [PATCH 01/10] mx27: basic cpu support   Sascha Hauer
• [U-Boot] [PATCH] remove myself as phycore/litekit Maintainer   Sascha Hauer
• [U-Boot] AMCC 405EX Trap   Jonathan Haws
• [U-Boot] AMCC 405EX Trap   Jonathan Haws
• [U-Boot] AMCC 405EX Trap   Jonathan Haws
• [U-Boot] AMCC 405EX Trap   Jonathan Haws
• [U-Boot] AMCC 405EX Register Definitions   Jonathan Haws
• [U-Boot] QUESTION: How do I generate an assembly listing?   Jonathan Haws
• [U-Boot] TICKET NO: 1110008342   Dell Headquarter
• [U-Boot] TICKET NO: 1110008342   Dell Mailing Headquarter
• [U-Boot] [PATCH] Move L2-cache enable/disable function to soc dependent code   HeungJun, Kim
• [U-Boot] onenand bad block handling   Geiger Ho
• [U-Boot] onenand bad block handling   Geiger Ho
• [U-Boot] [PATCH] fix accidental erase of OneNand whole chip   Geiger Ho
• [U-Boot] medical profession listings   Bennett Holland
• [U-Boot] (no subject)   JMC INVESTMENT
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Kazuaki Ichinohe
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Kazuaki Ichinohe
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Kazuaki Ichinohe
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Kazuaki Ichinohe
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Kazuaki Ichinohe
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Kazuaki Ichinohe
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Kazuaki Ichinohe
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Kazuaki Ichinohe
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Kazuaki Ichinohe
• [U-Boot] [PATCH] Canyonlands   Kazuaki Ichinohe
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Kazuaki Ichinohe
• [U-Boot] at91: fix a USB problem for AT91SAM9261   RONETIX - Ilko Iliev
• [U-Boot] U-Boot and CONFIG_SYS_DAVINCI_BROKEN_ECC   Stephen Irons
• [U-Boot] [RFC PATCH 1/2] sh: make lds more generic   Nobuhiro Iwamatsu
• [U-Boot] [RFC PATCH 1/2] sh: make lds more generic   Nobuhiro Iwamatsu
• [U-Boot] Which U-Boot releases have Device Tree support   JEW-DONG
• [U-Boot] Which U-Boot releases have Device Tree support   JEW-DONG
• [U-Boot] Memory problems on mpc8572ds   Rafal Jaworowski
• [U-Boot] Out-of-tree build of API code fails   Rafal Jaworowski
• [U-Boot] [RFC] API Licence   Rafal Jaworowski
• [U-Boot] USB driver for MPC8349 device   Dushara Jayasinghe
• [U-Boot] USB driver for MPC8349 device   Dushara Jayasinghe
• [U-Boot] Winner   Joan
• [U-Boot] Winner   Joan
• [U-Boot] map mtd partitions address for TWO NOR flash   H. Johnny
• [U-Boot] map mtd partitions address for TWO NOR flash   H. Johnny
• [U-Boot] Enable Autoboot   H. Johnny
• [U-Boot] Enable Autoboot   H. Johnny
• [U-Boot] kb9202/at91rm9200: compiler quirk?   Matthias Kaehlcke
• [U-Boot] kb9202/at91rm9200: compiler quirk?   Matthias Kaehlcke
• [U-Boot] [PATCH 1/2] KB9202: Update board resource information   Matthias Kaehlcke
• [U-Boot] [PATCH 2/2] KB9202: Add NAND support   Matthias Kaehlcke
• [U-Boot] [PATCH 2/2] KB9202: Add NAND support   Matthias Kaehlcke
• [U-Boot] [PATCH 2/2] KB9202: Add NAND support   Matthias Kaehlcke
• [U-Boot] [PATCH] Add +size syntax to nand commands to pad lengths to page sizes.   Josh Karabin
• [U-Boot] [PATCH] Add +size syntax to nand commands to pad lengths to page sizes.   Josh Karabin
• [U-Boot] [PATCH] Add a + prefix form to nand commands.   Josh Karabin
• [U-Boot] [PATCH 1/1] SMC911x driver fixed for NFS boot   Josh Karabin
• [U-Boot] Ethernet not working on OMAP3 board with   Josh Karabin
• [U-Boot] Ethernet not working on OMAP3 board with   Josh Karabin
• [U-Boot] Ethernet not working on OMAP3 board with   Josh Karabin
• [U-Boot] [PATCH 0/4] Support NAND and OneNAND memories on the OMAP3 EVM   Josh Karabin
• [U-Boot] [PATCH 1/4] Support multiple CONFIG_ENV options in a single build.   Josh Karabin
• [U-Boot] [PATCH 2/4] Support run-time disabling of NAND and OneNAND memories.   Josh Karabin
• [U-Boot] [PATCH 3/4] Support run-time disabling of u-boot commands.   Josh Karabin
• [U-Boot] [PATCH 4/4] Support NAND and OneNAND memories on the OMAP3 EVM.   Josh Karabin
• [U-Boot] [PATCH] mmc: Fix decoding of SCR & function switch data on little-endian machines   Yauhen Kharuzhy
• [U-Boot] [PATCH] mmc: Remove return from mmc_init for non SD 2.0 compatible cards.   Yauhen Kharuzhy
• [U-Boot] [PATCH] mmc: Remove return from mmc_init for non SD 2.0 compatible cards.   Yauhen Kharuzhy
• [U-Boot] [PATCH] change cpu.c under cpu/arm_cortexa8 dir to common code.   Kim, Heung Jun
• [U-Boot] [PATCH] change cpu.c under cpu/arm_cortexa8 dir to common code.   Kim, Heung Jun
• [U-Boot] [PATCH] change cpu.c under cpu/arm_cortexa8 dir to common code.   Kim, Heung Jun
• [U-Boot] [PATCH] The cache flush using coprocessor must be in lib_arm/cache-cp15.c   Kim, Heung Jun
• [U-Boot] [PATCH] The cache flush using coprocessor must be in lib_arm/cache-cp15.c   Kim, Heung Jun
• [U-Boot] [PATCH] Move L2-cache enable/disable function to soc dependent code   Kim, Heung Jun
• [U-Boot] [PATCH] ARM: unbreak PXA build by defining UP2OCR   Markus Klotzbücher
• [U-Boot] [PATCH] ARM: unbreak PXA build by defining UP2OCR   Markus Klotzbücher
• [U-Boot] AWARD WINNER!!!   Kruse, Mary M.
• [U-Boot] [PATCH] include/ns16550.h: Unify structure declaration for registers   Shinya Kuribayashi
• [U-Boot] [PATCH] include/ns16550.h: Unify structure declaration for registers   Shinya Kuribayashi
• [U-Boot] [PATCH] include/ns16550.h: Unify structure declaration for registers   Shinya Kuribayashi
• [U-Boot] [PATCH] include/ns16550.h: Unify structure declaration for registers   Shinya Kuribayashi
• [U-Boot] [PATCH] MIPS: Implement ethernet halt for au1x00   Shinya Kuribayashi
• [U-Boot] [PATCH] include/ns16550.h: Unify structure declaration for registers   Shinya Kuribayashi
• [U-Boot] [PATCH 1/2] MIPS: Make all extern-ed functions in bitops.h static   Shinya Kuribayashi
• [U-Boot] [PATCH 2/2] MIPS: lib_mips/board.c: Remove unused variables   Shinya Kuribayashi
• [U-Boot] [GIT PULL] MIPS updates   Shinya Kuribayashi
• [U-Boot] [GIT PULL] MIPS updates   Shinya Kuribayashi
• [U-Boot] [PATCH 1/1] mips: unify lds   Shinya Kuribayashi
• [U-Boot] [PATCH 1/1] mips: unify lds   Shinya Kuribayashi
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Shinya Kuribayashi
• [U-Boot] [PATCH 1/2 V2] mips: add endianness support   Shinya Kuribayashi
• [U-Boot] [PATCH 2/2 V2] mips: unify lds   Shinya Kuribayashi
• [U-Boot] [PATCH 1/2 V2] mips: add endianness support   Shinya Kuribayashi
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Shinya Kuribayashi
• [U-Boot] Congratulation !!   BRITISH NATIONAL LOTTERY
• [U-Boot] [PATCH] u-boot-v2 initrd support for ARM   Eric Lammerts
• [U-Boot] [PATCH] ARM DaVinci: EMIF settings   Thomas Lange
• [U-Boot] [PATCH] ARM DaVinci: Reset with watchdog enabled   Thomas Lange
• [U-Boot] [PATCH] AFEB9260 network fix   Sergey Lapin
• [U-Boot] [PATCH][Re-submission] AFEB9260 network fix   Sergey Lapin
• [U-Boot] [PATCH][Re-submission] AFEB9260 network fix   Sergey Lapin
• [U-Boot] Question about U-Boot porting based on MPC852T   Chengzhi Li
• [U-Boot] [PATCH 1/2] env_nand: remove unused variable.   Guennadi Liakhovetski
• [U-Boot] [PATCH 2/2] nand_spl: read environment early, when booting from NAND using nand_spl   Guennadi Liakhovetski
• [U-Boot] [PATCH 2/2] nand_spl: read environment early, when booting from NAND using nand_spl   Guennadi Liakhovetski
• [U-Boot] Axiom MCF5282 help   TC Liew
• [U-Boot] U-Boot on Xilinx Virtex platforms   Grant Likely
• [U-Boot] [PATCH] powerpc/inka4x0: Remove left-over ide reset code.   Grant Likely
• [U-Boot] Important Proposal   Mr. Song Lile
• [U-Boot] U-boot -printk kernel crash dump using md on PDK   Magnus Lilja
• [U-Boot] [RFC PATCH] console/device: rework function naming   Magnus Lilja
• [U-Boot] [PATCH v2 0/3] MX31: NAND boot for phyCORE and PDK boards.   Magnus Lilja
• [U-Boot] [PATCH v2 1/3] MX31: Add NAND SPL for i.MX31.   Magnus Lilja
• [U-Boot] [PATCH v2 2/3] MX31: Add basic support for Freescale i.MX31 PDK board.   Magnus Lilja
• [U-Boot] [PATCH v2 3/3] MX31: Add NAND SPL boot support to i.MX31 PDK board.   Magnus Lilja
• [U-Boot] U-boot -printk kernel crash dump using md on PDK   Magnus Lilja
• [U-Boot] [PATCH 01/10] mx27: basic cpu support   Magnus Lilja
• [U-Boot] [PATCH 04/10] mxc_nand: add nand driver for MX2/MX3   Magnus Lilja
• [U-Boot] [PATCH 07/10] mmc: use lldiv() for 64-bit division   Magnus Lilja
• [U-Boot] [PATCH 10/10] imx27lite: add support for imx27lite board from LogicPD   Magnus Lilja
• [U-Boot] [PATCH 04/10] mxc_nand: add nand driver for MX2/MX3   Magnus Lilja
• [U-Boot] [PATCH 10/10] imx27lite: add support for imx27lite board from LogicPD   Magnus Lilja
• [U-Boot] [RFC PATCH 3/3 V2] stdio/device: rework function naming convention   Magnus Lilja
• [U-Boot] [PATCH v2 1/3] MX31: Add NAND SPL for i.MX31.   Magnus Lilja
• [U-Boot] [PATCH v2 2/3] MX31: Add basic support for Freescale i.MX31 PDK board.   Magnus Lilja
• [U-Boot] [PATCH v2 3/3] MX31: Add NAND SPL boot support to i.MX31 PDK board.   Magnus Lilja
• [U-Boot] [PATCH v2 2/3] MX31: Add basic support for Freescale i.MX31 PDK board.   Magnus Lilja
• [U-Boot] [PATCH v2 3/3] MX31: Add NAND SPL boot support to i.MX31 PDK board.   Magnus Lilja
• [U-Boot] [PATCH v2 1/3] MX31: Add NAND SPL for i.MX31.   Magnus Lilja
• [U-Boot] [PATCH v2 1/3] MX31: Add NAND SPL for i.MX31.   Magnus Lilja
• [U-Boot] [PATCH v2 1/3] MX31: Add NAND SPL for i.MX31.   Magnus Lilja
• [U-Boot] [PATCH v2 3/3] MX31: Add NAND SPL boot support to i.MX31 PDK board.   Magnus Lilja
• [U-Boot] [PATCH 01/10] mx27: basic cpu support   Magnus Lilja
• [U-Boot] Clock frequency on a mx31 board   Magnus Lilja
• [U-Boot] [PATCH 4/7] mxc_nand: add nand driver for MX2/MX3   Magnus Lilja
• [U-Boot] [PATCH v2 1/3] MX31: Add NAND SPL for i.MX31.   Magnus Lilja
• [U-Boot] [PATCH] 85xx: Fix the wrong BCSR address of 8569MDS   Dave Liu
• [U-Boot] [PATCH] 85xx: Fix the wrong SYS_CLK_IN for 8569MDS   Dave Liu
• [U-Boot] [PATCH] OMAP3EVM: net_chip uses CS5 not CS6   Matthias Ludwig
• [U-Boot] [PATCH] OMAP3EVM: net_chip uses CS5 not CS6   Matthias Ludwig
• [U-Boot] [PATCH] OMAP3EVM: net_chip uses CS5 not CS6   Matthias Ludwig
• [U-Boot] [PATCH 0/4] omap3: clean up gpmc config strut   Matthias Ludwig
• [U-Boot] [PATCH 1/4] omap3: embedd gpmc_cs into gpmc config struct   Matthias Ludwig
• [U-Boot] [PATCH 2/4] omap3: remove typedef for struct gpmc   Matthias Ludwig
• [U-Boot] [PATCH 3/4] omap3: replace all instances of gpmc config struct by one global   Matthias Ludwig
• [U-Boot] [PATCH 4/4] omap3: use only fixed-size types inside ctrl_structs   Matthias Ludwig
• [U-Boot] [PATCH 0/4] omap3: clean up gpmc config strut   Matthias Ludwig
• [U-Boot] [PATCH 2/4] omap3: remove typedef for struct gpmc   Matthias Ludwig
• [U-Boot] [PATCHv2 1/4] omap3: embedd gpmc_cs into gpmc config struct   Matthias Ludwig
• [U-Boot] [PATCHv2 2/4] omap3: remove typedefs for configuration structs   Matthias Ludwig
• [U-Boot] [PATCHv2 3/4] omap3: replace all instances of gpmc config struct by one global   Matthias Ludwig
• [U-Boot] [PATCHv2 4/4] omap3: use only fixed-size types inside ctrl_structs   Matthias Ludwig
• [U-Boot] [PATCHv2 1/4] omap3: embedd gpmc_cs into gpmc config struct   Matthias Ludwig
• [U-Boot] [PATCHv2 2/4] omap3: remove typedefs for configuration structs   Matthias Ludwig
• [U-Boot] [PATCHv2 4/4] omap3: use only fixed-size types inside ctrl_structs   Matthias Ludwig
• [U-Boot] [PATCHv2 1/4] omap3: embedd gpmc_cs into gpmc config struct   Matthias Ludwig
• [U-Boot] Ethernet not working on OMAP3 board with   Matthias Ludwig
• [U-Boot] [PATCHv3 0/5] clean up omap3 configuration structs   Matthias Ludwig
• [U-Boot] [PATCHv3 1/5] OMAP3EVM: net_chip uses CS5 not CS6   Matthias Ludwig
• [U-Boot] [PATCHv3 2/5] omap3: embedd gpmc_cs into gpmc config struct   Matthias Ludwig
• [U-Boot] [PATCHv3 3/5] omap3: remove typedefs for configuration structs   Matthias Ludwig
• [U-Boot] [PATCHv3 4/5] omap3: replace all instances of gpmc config struct by one global   Matthias Ludwig
• [U-Boot] [PATCHv3 5/5] omap3: use only fixed-size types inside ctrl_structs   Matthias Ludwig
• [U-Boot] [PATCH] ARM: unbreak PXA build by defining UP2OCR   Daniel Mack
• [U-Boot] [PATCH] ARM: unbreak PXA build by defining UP2OCR   Daniel Mack
• [U-Boot] [PATCH] ARM: unbreak PXA build by defining UP2OCR   Daniel Mack
• [U-Boot] [PATCH] ARM: unbreak PXA build by defining UP2OCR   Daniel Mack
• [U-Boot] [PATCH] ARM: unbreak PXA build by defining UP2OCR   Daniel Mack
• [U-Boot] [PATCH 1/6] mpc8xxx: USB: Removed reenablement of its interface   Vivek Mahajan
• [U-Boot] [PATCH 2/6] mpc8xxx: USB: Relocates ehci-fsl.h to include/usb   Vivek Mahajan
• [U-Boot] [PATCH 3/6] mpc83xx: USB: Reorganized its support   Vivek Mahajan
• [U-Boot] [PATCH 4/6] mpc85xx: USB: Add support   Vivek Mahajan
• [U-Boot] [PATCH 5/6] mpc83xx: 8315erdb: Add USB related CONFIGs   Vivek Mahajan
• [U-Boot] [PATCH 6/6] mpc85xx: 8536ds: Add USB related CONFIGs   Vivek Mahajan
• [U-Boot] [PATCH v2 3/6] mpc83xx: USB: Reorganized its support   Vivek Mahajan
• [U-Boot] [PATCH v2 5/6] mpc83xx: 8315erdb: Add USB related CONFIGs   Vivek Mahajan
• [U-Boot] [PATCH v2 6/6] mpc85xx: 8536ds: Add USB related CONFIGs   Vivek Mahajan
• [U-Boot] Data transfer through Ethernet in u-boot.   Marco
• [U-Boot] [PATCH v6] Add imls utility command   Marco
• [U-Boot] [PATCH] Remove inline qualifier from show_boot_progress()   Emil Medve
• [U-Boot] Unable to debug UBOOT   Nishanth Menon
• [U-Boot] [PATCH 0/4] omap3: clean up gpmc config strut   Nishanth Menon
• [U-Boot] MPC8536DS Evaluation Board Force DDR Setting cannot bedone properly   Hu Mingkai-B21284
• [U-Boot] U-boot and linux command line parameters   Mirek23
• [U-Boot] U-boot and linux command line parameters   Mirek23
• [U-Boot] U-boot and linux command line parameters   Mirek23
• [U-Boot] U-boot and linux command line parameters   Mirek23
• [U-Boot] Current status of UBI?   Werner Nedel
• [U-Boot] DDR2 configuration in MPC85xx   Werner Nedel
• [U-Boot] DDR2 configuration in MPC85xx   Werner Nedel
• [U-Boot] DDR2 configuration in MPC85xx   Werner Nedel
• [U-Boot] DDR2 configuration in MPC85xx   Werner Nedel
• [U-Boot] Physician Directory   Tina + Neff
• [U-Boot] Add a new command to U-Boot   Subodh Nijsure
• [U-Boot] Enable Autoboot   Vijay Nikam
• [U-Boot] Auto-booting problem   Vijay Nikam
• [U-Boot] [PATCH] Marvell 88EXXXX Switch/PHY init support   Sergey Nikulov
• [U-Boot] [PATCH] Marvell 88EXXXX Switch/PHY init support   Sergey Nikulov
• [U-Boot] FLASH write bug on NGW100   Ben Nizette
• [U-Boot] Congrats   Online Notice
• [U-Boot] Contact   Batch Number
• [U-Boot] Your e-mail address has won you US$4,600,000.00   U. K Lottery Organization
• [U-Boot] Disable features   Derek Ou
• [U-Boot] [PATCH 1/4] arm: unify interrupt init   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/4] arm: remove cpu_init   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/4] s3c4510b: move interrupts code to soc   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 4/4] lpc2292: move interrupts code to soc   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Disable features   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [patch u-boot git arm/next] davinci: display correct clock info   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] at91: remove lowlevel_init.S   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] at91: remove lowlevel_init.S   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC PATCH 1/6] integratorap: split pci support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC PATCH 2/6] integratorap: split timer support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC PATCH 3/6] integratorcp: split timer support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC PATCH 4/6] integratorap/cp/versatile: remove non used functions   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC PATCH 5/6] integratorap/cp: use cfi driver   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC PATCH 6/6] integrator: merge integratorap and integratorcp   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH V2] arm: timer and interrupt init rework   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/2] pm9263: lowlevel init update   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2] pm9263: use macro instead of hardcode value for the lowlevel_init   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] omap3: remove copy&paste global arm interrupts code   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] arm: clean sizes.h   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH V2] arm: timer and interrupt init rework   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Cross-compiling U-Boot on Mac OS X -- can't find crc32.c?   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/3] versatile: config coding style cleanup   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/3] versatile: specify the board type on the prompt   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/3] versatile: update config and merge to cfi flash driver   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v4] Marvell Kirkwood family SOC support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v4] Marvell MV88F6281GTW_GE Board support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [Bug] IXP425 and e1000 network driver   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Part 1/0   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Using U-boot on the IXP432   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/2] arm/dcc: use static support to allow to use it at anytime   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2] arm/dcc: add xcale support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] arm: clean sizes.h   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH V2] arm: timer and interrupt init rework   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] at91: fix a USB problem for AT91SAM9261   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/3] versatile: config coding style cleanup   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] at91: fix a USB problem for AT91SAM9261   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v4] Marvell Kirkwood family SOC support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v4] Marvell MV88F6281GTW_GE Board support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] Add config option for disabling DM9000-SROM support.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] Add config option for disabling DM9000-SROM support.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC PATCH] console/device: rework function naming   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC PATCH] console/device: rework function naming   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC PATCH] console/device: rework function naming   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC PATCH] console/device: rework function naming   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v4] Marvell Kirkwood family SOC support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] ARM: unbreak PXA build by defining UP2OCR   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] kb9202/at91rm9200: compiler quirk?   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v6] Marvell Kirkwood family SOC support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v9] Marvell MV88E61XX Switch Driver support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v6] Marvell MV88F6281GTW_GE Board support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v6] Marvell Kirkwood family SOC support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] ARM: unbreak PXA build by defining UP2OCR   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] ARM: unbreak PXA build by defining UP2OCR   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] ARM: unbreak PXA build by defining UP2OCR   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] OMAP3EVM: Set default bootfile   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/3] OMAP3: Rename interrupts.c to timer.c   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/3] OMAP3: Reorganize Makefile style   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] OMAP3: Introduce CONFIG option for power code   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] ARM: Updating mach-types.h   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] OMAP3EVM: net_chip uses CS5 not CS6   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] ARM: unbreak PXA build by defining UP2OCR   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] ARM DaVinci:Consolidate common u-boot.lds   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/6] OMAP Consolidate common u-boot.lds to cpu layer.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/6] ZOOM2 Add initial support for Zoom2   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/6] OMAP3 Port kernel omap gpio interface.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 5/6] ZOOM2 Add serial support.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 6/6] ZOOM2 Add led support.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] arm: unify lds   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] arm: unify lds   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/6] OMAP3 Port kernel omap gpio interface.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/3] console.h: remove non implement function : console_realloc   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/3] console: unify printing current devices   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC PATCH 3/3 V2] stdio/device: rework function naming convention   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/6] arm: unify interrupt init   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/6] arm: remove cpu_init   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/6] s3c4510b: move interrupts code to soc   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 4/6] lpc2292: move interrupts code to soc   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 5/6] arm920t/interrupts: Move conditional compilation to Makefile   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 6/6] S3C24x0: extract interrupts from timer   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v4] ARM DaVinci Adding DM357 Support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [patch u-boot-git 2/2] davinci_nand: cleanup II (CONFIG_SYS_DAVINCI_BROKEN_ECC )   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2 1/3] MX31: Add NAND SPL for i.MX31.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2 2/3] MX31: Add basic support for Freescale i.MX31 PDK board.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2 3/3] MX31: Add NAND SPL boot support to i.MX31 PDK board.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC PATCH 3/3 V2] stdio/device: rework function naming convention   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/6] s3c4510b: move interrupts code to soc   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/6] arm: unify interrupt init   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/6] arm: remove cpu_init   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] OMAP3: Introduce CONFIG option for power code   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/6] x86/pcat_timer: fix implicit declaration of function ‘unmask_irq’   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/6] x86/sc520_pci: fix non renaming PCI_REGION_MEMORY by commit ff4e66e93   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/6] sc520_spunk: fix ssi.h include location   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 4/6] x86: fix pci large integer implicitly truncated to unsigned type   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 5/6] fix ‘x86/video_bios: probe_pci_video’ defined but not used   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 6/6] eNET: fix MAKEALL   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2 2/3] MX31: Add basic support for Freescale i.MX31 PDK board.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2 1/3] MX31: Add NAND SPL for i.MX31.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2 3/3] MX31: Add NAND SPL boot support to i.MX31 PDK board.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/6] s3c4510b: move interrupts code to soc   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] mips: unify lds   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2 3/3] MX31: Add NAND SPL boot support to i.MX31 PDK board.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/4] net: extend the netdev to have a common way to set the hw mac address   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/4] macb: add set_hw_enetaddr support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/4] net/dm9000: move the CONFIG_NET_MULTI api   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 4/4] at91/macb: remove reset_phy callback   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/4] net: extend the netdev to have a common way to set the hw mac address   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/4] net: extend the netdev to have a common way to set the hw mac address   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/4] net: extend the netdev to have a common way to set the hw mac address   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/4] net: extend the netdev to have a common way to set the hw mac address   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/4] net/dm9000: move the CONFIG_NET_MULTI api   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/4] net: extend the netdev to have a common way to set the hw mac address   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2 1/3] MX31: Add NAND SPL for i.MX31.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2 3/3] MX31: Add NAND SPL boot support to i.MX31 PDK board.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2 3/3] MX31: Add NAND SPL boot support to i.MX31 PDK board.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [patch arm/next] dm355 evm support (v2)   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] ARM DaVinci: Minor Updates to base addresses   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] OMAP3EVM: Set default bootfile   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] OMAP3: Introduce CONFIG option for power code   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] arm/imx31_phycore: Fix bi_arch_number   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/6] s3c4510b: move interrupts code to soc   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] AFEB9260 network fix   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 0/3][Net][ARM] Davinci Ethernet driver cleanup   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Timeout in tftp.c   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2 3/3] MX31: Add NAND SPL boot support to i.MX31 PDK board.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] OMAP3: Introduce CONFIG option for power code   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/4] omap3: remove typedef for struct gpmc   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCHv2 1/4] omap3: embedd gpmc_cs into gpmc config struct   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCHv2 2/4] omap3: remove typedefs for configuration structs   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCHv2 3/4] omap3: replace all instances of gpmc config struct by one global   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCHv2 4/4] omap3: use only fixed-size types inside ctrl_structs   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] arm/imx31_phycore: Fix bi_arch_number   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH][Re-submission] AFEB9260 network fix   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [patch arm/next] dm355 evm support (v3)   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCHv2 3/4] omap3: replace all instances of gpmc config struct by one global   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] arm/imx31_phycore: Fix bi_arch_number   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCHv2 1/4] omap3: embedd gpmc_cs into gpmc config struct   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Timeout in tftp.c   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH V3] arm: timer and interrupt init rework   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] api: remove un-needed ifdef CONFIG_API already handle by the Makefile   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/4 v4] console.h: remove unused prototype 'console_realloc'   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/4 v4] stdio/device: rework function naming convention   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/4 v4] console: unify printing current devices   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 4/4 v4] mpl: printing current stdio devices cleanup   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] at91: regroup IP hw init in one cpu file per soc   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC PATCH 1/2] sh: make lds more generic   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC PATCH 2/2] sh: unify lds   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] Timeout in tftp.c   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2] video: Add an option to skip video initialization   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] remove myself as phycore/litekit Maintainer   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [ANNOUNCE] Search for phycore/litekit board Maintainer   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] arm/imx31_phycore: Fix bi_arch_number   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] ARM pull Request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2] video: Add an option to skip video initialization   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2] video: Add an option to skip video initialization   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] ARM Pull Request for next   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] ARM DaVinci: Reset with watchdog enabled   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] ARM Pull Request for next   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/3 v5] stdio/device: rework function naming convention   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/3 v5] console: unify printing current devices   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/3 v5] mpl: printing current stdio devices cleanup   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 5/6] ZOOM2 Add serial support.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] nand_init: use loff_t for offset   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] kgdb: unify kgdb on serial   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/2] pxa: move serial driver to drivers/serial   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2] lh7a40x: move serial driver to drivers/serial   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] OMAP3: Zoom2: Fix missing Board and CPU info   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/2] ZOOM2 Add serial support.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2] ZOOM2 Add led support.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/1] arm: unify some CONFIGs   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2] OMAP3: Zoom2: Enable Board and CPU info   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] ARM DaVinci Leopard Board Support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [patch] Add display cpuinfo for Atmel at91sam9261 Cores   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC] API Licence   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC] API Licence   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] ARM DaVinci Leopard Board Support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v7] Marvell Kirkwood family SOC support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v7.1] Marvell Kirkwood family SOC support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v8] Marvell MV88F6281GTW_GE Board support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] OMAP3: Fix CKE1 MUX setting to allow self-refresh   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2] OMAP3: Introduce CONFIG option for power code   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCHv2 1/4] omap3: embedd gpmc_cs into gpmc config struct   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/3 v5] stdio/device: rework function naming convention   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v3] Add support for Linux-like kallsysms   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] nand_init: use loff_t for offset   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] omap24xx: rename reset file   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] at91: extract reset from timer   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] at91: move cpu name define to arm/arch/ cpu header   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] at91: move cpu info print to cpu   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] config.mk: remove un-needed REMOTE_BUILD check   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2] at91: move cpu info print to cpu   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] at91/cpu.c: add missing Copyright & GPL header   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] ARM next Pull Request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC PATCH 1/2] sh: make lds more generic   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] at91: Add command to control GPIO LEDs from the console   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH V2] make MODEM SUPPORT generic instead of duplicate it   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] *** PROBABLY SPAM *** Re: [PATCH 1/1] mips: unify lds   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] at91: Add support for MEESC board of esd gmbh   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] at91: Extended soft_i2c driver for AT91SAM9263 SoC   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH][u-boot arm/next] ARM DaVinci DM365 Support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/7] mx27: basic cpu support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/7] serial_mx31: allow it to work with mx27 too and rename to serial_mxc   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 6/7] arm: add support for CONFIG_GENERIC_MMC   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v10] Marvell MV88F6281GTW_GE Board support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] avr32: unified u-boot.lds   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/2 V2] mips: add endianness support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2 V2] mips: unify lds   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] LDS Consolidation   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC] initcall mechanism introduction   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/3] arm: add initcalls_init   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/3] net: switch device init to initcall   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/2 V2] mips: add endianness support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/3] net: switch device init to initcall   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] ARM DaVinci Minor Change to header file   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/2 V2] mips: add endianness support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/3] fix: missing autoconfig.mk from general Makefile   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/3] mips: add endianness support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 3/3] mips: unify lds   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC] initcall mechanism introduction   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] config.mk: remove un-needed REMOTE_BUILD check   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC] initcall mechanism introduction   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/3] fix: missing autoconfig.mk from general Makefile   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCHv3 1/5] OMAP3EVM: net_chip uses CS5 not CS6   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCHv3 3/5] omap3: remove typedefs for configuration structs   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCHv2 4/4] omap3: use only fixed-size types inside ctrl_structs   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] DaVinci Network Driver Updates   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCHv3 3/5] omap3: remove typedefs for configuration structs   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] ARM next Pull Request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [Resend PATCH] afeb9260: fix macb device init   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCHv3 3/5] omap3: remove typedefs for configuration structs   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] ARM next Pull Request   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] at91: Add support for MEESC board of esd gmbh   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] at91: Add support for MEESC board of esd gmbh   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v10] Marvell Kirkwood family SOC support NAND discussion   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [RFC] initcall mechanism introduction   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] change cpu.c under cpu/arm_cortexa8 dir to common code.   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] The cache flush using coprocessor must be in lib_arm/cache-cp15.c   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] The cache flush using coprocessor must be in lib_arm/cache-cp15.c   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] The cache flush using coprocessor must be in lib_arm/cache-cp15.c   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] Move L2-cache enable/disable function to soc dependent code   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 1/2 V2] afeb9260: fix macb device init   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2 V2] arm: unify linker script   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] arm: Kirkwood: Basic SOCs support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] spi: Add Marvell Kirkwood SPI driver   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] net: Add Marvell Kirkwood gigabit ethernet driver   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] ARM Cortex A8: Move OMAP3 specific reset handler to OMAP3 code   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] arm: Kirkwood: Basic SOCs support   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH v2] arch_misc_init support for ARM architectures   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH] ARM DaVinci: EMIF settings   Jean-Christophe PLAGNIOL-VILLARD
• [U-Boot] [PATCH 2/2] Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN   Kyungmin Park
• [U-Boot] [PATCH v4] ARM DaVinci Adding DM357 Support   Paulraj, Sandeep
• [U-Boot] [PATCH] DaVinci Network Driver Updates   Paulraj, Sandeep
• [U-Boot] [PATCH] ARM DaVinci Leopard Board Support   Paulraj, Sandeep
• [U-Boot] [PATCH] ARM DaVinci Leopard Board Support   Paulraj, Sandeep
• [U-Boot] [PATCH v2 0/3][Net][ARM] Davinci Ethernet driver cleanup   Paulraj, Sandeep
• [U-Boot] [PATCH][u-boot arm/next] ARM DaVinci DM365 Support   Paulraj, Sandeep
• [U-Boot] [PATCH 00/29] Rework MPC512x Support   Kim Phillips
• [U-Boot] [PATCH 05/29] Rename ads5121 board into mpc5121ads   Kim Phillips
• [U-Boot] [PATCH] lib_arch/board.c: Move malloc initialization before flash_init()   Kim Phillips
• [U-Boot] [PATCH 00/29] Rework MPC512x Support   Kim Phillips
• [U-Boot] [PATCH] lib_arch/board.c: Move malloc initialization before flash_init()   Kim Phillips
• [U-Boot] [PATCH v2 05/10] Rename ads5121 board into mpc5121ads   Kim Phillips
• [U-Boot] [PATCH 0/3] TQM834x: configuration update   Kim Phillips
• [U-Boot] Please pull u-boot-mpc83xx next   Kim Phillips
• [U-Boot] [PATCH 1/2] TQM834x: remove defines causing gcc4.4 warnings   Kim Phillips
• [U-Boot] [PATCH 2/2] common: fix inline--weak error spotted by gcc 4.4   Kim Phillips
• [U-Boot] [PATCH 1/2] 83xx: Replace CONFIG_MPC83XX with CONFIG_MPC83xx   Kim Phillips
• [U-Boot] [PATCH 1/2] 83xx: Replace CONFIG_MPC83XX with CONFIG_MPC83xx   Kim Phillips
• [U-Boot] Please pull u-boot-ppc4xx/next   Kim Phillips
• [U-Boot] [PATCH] OMAP3EVM: Set default bootfile   Pillai, Manikandan
• [U-Boot] [PATCH] OMAP3EVM: net_chip uses CS5 not CS6   Pillai, Manikandan
• [U-Boot] [PATCH] OMAP3EVM: net_chip uses CS5 not CS6   Pillai, Manikandan
• [U-Boot] Ethernet not working on OMAP3 board with   Pillai, Manikandan
• [U-Boot] Ethernet not working on OMAP3 board with   Pillai, Manikandan
• [U-Boot] Ethernet not working on OMAP3 board with   Pillai, Manikandan
• [U-Boot] Ethernet not working on OMAP3 board with   Pillai, Manikandan
• [U-Boot] Ethernet not working on OMAP3 board with   Pillai, Manikandan
• [U-Boot] Unable to debug UBOOT   Aggrwal Poonam-B10812
• [U-Boot] [PATCH 1/1] V2 Add config option for disabling DM9000-SROM support.   Stelian Pop
• [U-Boot] [PATCH] OMAP3EVM: Set default bootfile   Sanjeev Premi
• [U-Boot] [PATCH] OMAP3EVM: Set default bootfile   Premi, Sanjeev
• [U-Boot] ARM: Updating mach-types.h   Premi, Sanjeev
• [U-Boot] ARM: Updating mach-types.h   Premi, Sanjeev
• [U-Boot] Winner.........£950.000.00 Pounds   Global Promo
• [U-Boot] U-Boot on Xilinx Virtex platforms   Felix Radensky
• [U-Boot] DDR2 autocalibration failure on 460EX   Felix Radensky
• [U-Boot] Incorrect MDIO clock setup in 4xx network driver   Felix Radensky
• [U-Boot] [PATCH] ppc4xx/net: Fix MDIO clock setup   Felix Radensky
• [U-Boot] USB gadget interface from cdc branch into mainline   Ragha
• [U-Boot] Regarding U-boot   Rajkumar
• [U-Boot] Kconfig menu layout (multiple ways to show the same Kconfig configs?)   Sam Ravnborg
• [U-Boot] Ping on Coldfire patch status   Richard Retanubun
• [U-Boot] Question about M29W128G CFI QRY bug   Richard Retanubun
• [U-Boot] coldFire: net: Question about the use of MCFFEC_TOUT_LOOP   Richard Retanubun
• [U-Boot] uboot-2009.06-rc1: git: seeing extra files in git status report.   Richard Retanubun
• [U-Boot] Subject: [PATCH] Standardize the use of MCFFEC_TOUT_LOOP as a udelay(1) loop counter.   Richard Retanubun
• [U-Boot] Subject: [PATCH] [repost] Standardize the use of MCFFEC_TOUT_LOOP as a udelay(1) loop counter.   Richard Retanubun
• [U-Boot] Net: UEC: Question about (R)TBI interface initialization in u-boot.   Richard Retanubun
• [U-Boot] Ping on Coldfire patch status   John Rigby
• [U-Boot] [PATCH 00/29] Rework MPC512x Support   John Rigby
• [U-Boot] USB EHCI driver   John Rigby
• [U-Boot] [PATCH 1/6] OMAP Consolidate common u-boot.lds to cpu layer.   Tom Rix
• [U-Boot] [PATCH 2/6] ZOOM2 Add initial support for Zoom2   Tom Rix
• [U-Boot] [PATCH 3/6] OMAP3 Port kernel omap gpio interface.   Tom Rix
• [U-Boot] [PATCH 4/6] ZOOM2 Add support for debug board detection.   Tom Rix
• [U-Boot] [PATCH 5/6] ZOOM2 Add serial support.   Tom Rix
• [U-Boot] [PATCH 6/6] ZOOM2 Add led support.   Tom Rix
• [U-Boot] [PATCH 3/6] OMAP3 Port kernel omap gpio interface.   Tom Rix
• [U-Boot] [PATCH 1/2] ZOOM2 Add serial support.   Tom Rix
• [U-Boot] [PATCH 2/2] ZOOM2 Add led support.   Tom Rix
• [U-Boot] [PATCH 1/1] FAT replace compare_sign with strncmp.   Tom Rix
• [U-Boot] Zoom2, Beagle board revision detection.   Tom Rix
• [U-Boot] [PATCH 1/3] Fix a typo in the instructions on using omap3's gpio interface.   Tom Rix
• [U-Boot] [PATCH 2/3] ZOOM2 detect the version of the zoom2 board at runtime.   Tom Rix
• [U-Boot] [PATCH 3/3] Beagle Convert the board version detection to use the OMAP3 GPIO interface.   Tom Rix
• [U-Boot] OMAP3, Zoom2 Initializing GPIO bank clocks   Tom Rix
• [U-Boot] [PATCH 1/2] OMAP3 Turn on the GPIO bank clocks   Tom Rix
• [U-Boot] [PATCH 2/2] ZOOM2 Define GPIO banks used.   Tom Rix
• [U-Boot] AMCC 405EX Trap   Stefan Roese
• [U-Boot] Current status of UBI?   Stefan Roese
• [U-Boot] Current status of UBI?   Stefan Roese
• [U-Boot] [PATCH 1/6] esd/common: extend cpld command with address parameter   Stefan Roese
• [U-Boot] PPC4xx without CONFIG_NET_MULTI   Stefan Roese
• [U-Boot] AMCC 405EX Trap   Stefan Roese
• [U-Boot] AMCC 405EX Trap   Stefan Roese
• [U-Boot] mtdparts and JFFS2   Stefan Roese
• [U-Boot] [PATCH 2/2][Net][ppc4xx] Remove support for non-CONFIG_NET_MULTI on PPC4xx EMAC   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Add Sequoia RAM-booting target   Stefan Roese
• [U-Boot] [PATCH 2/2][Net][ppc4xx] Remove support for non-CONFIG_NET_MULTI on PPC4xx EMAC   Stefan Roese
• [U-Boot] [PATCH 1/2][Net][ppc4xx] Enable CONFIG_NET_MULTI on all remaining PPC4xx boards   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/next   Stefan Roese
• [U-Boot] [PATCH 1/1] at91: Add command to control up to 3 GPIO LEDs from the console   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Add Sequoia RAM-booting target   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Add Sequoia RAM-booting target   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Add Sequoia RAM-booting target   Stefan Roese
• [U-Boot] [PATCH 1/1] at91: Add command to control up to 3 GPIO LEDs from the console   Stefan Roese
• [U-Boot] [PATCH 08/29] MPC512x: add support for ARIA board   Stefan Roese
• [U-Boot] [PATCH v2] ppc4xx: Add Sequoia RAM-booting target   Stefan Roese
• [U-Boot] [PATCH v2] ppc4xx: Add Sequoia RAM-booting target   Stefan Roese
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Stefan Roese
• [U-Boot] [PATCH v2] ppc4xx: Add Sequoia RAM-booting target   Stefan Roese
• [U-Boot] [PATCH] lib_arch/board.c: Move malloc initialization before flash_init()   Stefan Roese
• [U-Boot] [PATCH] cfi_mtd: Fix bug in last sector detection   Stefan Roese
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Stefan Roese
• [U-Boot] [PATCH] mtd: Add MTD concat support to concatenate multiple MTD NOR devices   Stefan Roese
• [U-Boot] [PATCH] cmd_mtdparts: Move to common handling of FLASH devices via MTD layer   Stefan Roese
• [U-Boot] [PATCH] cmd_flash updates: Remove unneeded CONFIG_CMD_JFFS2   Stefan Roese
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Stefan Roese
• [U-Boot] [PATCH v2] ppc4xx: Add Sequoia RAM-booting target   Stefan Roese
• [U-Boot] [PATCH v3] ppc4xx: Add Sequoia RAM-booting target   Stefan Roese
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/next   Stefan Roese
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Stefan Roese
• [U-Boot] [PATCH] cmd_mtdparts: Move to common handling of FLASH devices via MTD layer   Stefan Roese
• [U-Boot] [PATCH v2] mtd: Add MTD concat support to concatenate multiple MTD NOR devices   Stefan Roese
• [U-Boot] [PATCH] mtd: Introduce CONFIG_MTD_DEVICE to select compilation of mtdcore.o   Stefan Roese
• [U-Boot] [PATCH v2] cmd_mtdparts: Move to common handling of FLASH devices via MTD layer   Stefan Roese
• [U-Boot] [PATCH] mtd: MTD related config header changes (mtdparts command)   Stefan Roese
• [U-Boot] Repository with latest (mostly) MTD related changes for testing   Stefan Roese
• [U-Boot] [PATCH] lib_arch/board.c: Move malloc initialization before flash_init()   Stefan Roese
• [U-Boot] [PATCH] common/cmd_ide.c: Coding style cleanup (Lindent)   Stefan Roese
• [U-Boot] [PATCH] common/cmd_ide.c: Coding style cleanup (Lindent)   Stefan Roese
• [U-Boot] [PATCH] cmd_ide: Fix detection problem with missing devices   Stefan Roese
• [U-Boot] [PATCH] 74xx_7xx: Fix rounding problem in CPU frequency calculation   Stefan Roese
• [U-Boot] [PATCH] video: ct6900: Add an option to skip video initialization   Stefan Roese
• [U-Boot] [PATCH] 74xx_7xx: Add CPCI adapter/target support for the CPCI750   Stefan Roese
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Stefan Roese
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Stefan Roese
• [U-Boot] [PATCH] video: ct6900: Add an option to skip video initialization   Stefan Roese
• [U-Boot] [PATCH] cmd_ide: Fix detection problem with missing devices   Stefan Roese
• [U-Boot] [PATCH] video: ct6900: Add an option to skip video initialization   Stefan Roese
• [U-Boot] [PATCH] cmd_ide: Fix detection problem with missing devices   Stefan Roese
• [U-Boot] [PATCH] video: ct6900: Add an option to skip video initialization   Stefan Roese
• [U-Boot] [PATCH 3/3] TQM834x: use buffered writes to accelerate writing to flash   Stefan Roese
• [U-Boot] [PATCH v2] IDE: bail out of dev_print() for unknown device types   Stefan Roese
• [U-Boot] [PATCH] video: ct6900: Add an option to skip video initialization   Stefan Roese
• [U-Boot] [PATCH] video: Add an option to skip video initialization   Stefan Roese
• [U-Boot] [PATCH] Redundant Environment: protect full sector size   Stefan Roese
• [U-Boot] [PATCH v2] IDE: bail out of dev_print() for unknown device types   Stefan Roese
• [U-Boot] [PATCH 2/2] video: Add an option to skip video initialization   Stefan Roese
• [U-Boot] PCIe on Kilauea   Stefan Roese
• [U-Boot] [PATCH v4] Separate mtdparts command from jffs2   Stefan Roese
• [U-Boot] [RFC/PATCH] jffs2/mtdparts: Fix problem with usage from JFFS2 and MTDPARTS together   Stefan Roese
• [U-Boot] [PATCH] UBI: fix return code in ubi_volume_read   Stefan Roese
• [U-Boot] [PATCH 1/3] ppc4xx: Move definition for PPC4xx NAND FLASH controller to header   Stefan Roese
• [U-Boot] [PATCH 2/3] ppc4xx: Fix problem with ECC ordering for PPC4xx NDFC platforms   Stefan Roese
• [U-Boot] [PATCH 3/3] nand: Fix problem with ECC ordering for PPC4xx NDFC platforms   Stefan Roese
• [U-Boot] [RFC/PATCH] jffs2/mtdparts: Fix problem with usage from JFFS2 and MTDPARTS together   Stefan Roese
• [U-Boot] [RFC/PATCH] jffs2/mtdparts: Fix problem with usage from JFFS2 and MTDPARTS together   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx   Stefan Roese
• [U-Boot] Please pull u-boot-ubi - was Re: Please pull u-boot-ppc4xx   Stefan Roese
• [U-Boot] [PATCH v8] Marvell Kirkwood family SOC support   Stefan Roese
• [U-Boot] [PATCH] Canyonlands SATA harddisk driver   Stefan Roese
• [U-Boot] [PATCH v8] Marvell Kirkwood family SOC support   Stefan Roese
• [U-Boot] [PATCH] Marvell Sheevaplug Board support   Stefan Roese
• [U-Boot] [PATCH 1/3] ppc4xx: Move definition for PPC4xx NAND FLASH controller to header   Stefan Roese
• [U-Boot] Please pull ppc4xx   Stefan Roese
• [U-Boot] [PATCH v10] Marvell MV88F6281GTW_GE Board support   Stefan Roese
• [U-Boot] [PATCH v10] Marvell Kirkwood family SOC support   Stefan Roese
• [U-Boot] [PATCH v10] Marvell Kirkwood family SOC support   Stefan Roese
• [U-Boot] [PATCH v10] Marvell Kirkwood family SOC support   Stefan Roese
• [U-Boot] [PATCH 2/2][Net][ppc4xx] Remove support for non-CONFIG_NET_MULTI on PPC4xx EMAC   Stefan Roese
• [U-Boot] [PATCH v10] Marvell Kirkwood family SOC support   Stefan Roese
• [U-Boot] [PATCH v10] Marvell Kirkwood family SOC support NAND discussion   Stefan Roese
• [U-Boot] [PATCH] bin_dep.sh Support   Stefan Roese
• [U-Boot] [PATCH v4] Gbe Controller driver support for kirkwood SOCs   Stefan Roese
• [U-Boot] [PATCH 1/2] 83xx: Replace CONFIG_MPC83XX with CONFIG_MPC83xx   Stefan Roese
• [U-Boot] [PATCH v4] Gbe Controller driver support for kirkwood SOCs   Stefan Roese
• [U-Boot] [RFC] initcall mechanism introduction   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Remove PCI async bootup message if PCI is not used   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/next   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/next   Stefan Roese
• [U-Boot] Incorrect MDIO clock setup in 4xx network driver   Stefan Roese
• [U-Boot] [PATCH V2] arm: timer and interrupt init rework   Michael Roth
• [U-Boot] Support in u-boot for PCI-Express NIC   Zang Roy-R61911
• [U-Boot] [PATCH] arm: unify lds   Alessandro Rubini
• [U-Boot] Not able to print env variable added in standalone application   Kartheek N S
• [U-Boot] how to use a function provided by u-boot in linux driver   Kartheek N S
• [U-Boot] Xilinx SPI driver   Seyyed Mohammad Sajjadi
• [U-Boot] Please pull u-boot-i2c.git next branch   Heiko Schocher
• [U-Boot] [PATCH 08/29] MPC512x: add support for ARIA board   Heiko Schocher
• [U-Boot] [PATCH 21/29] cpu/mpc512x/i2c.c: prepare removal of include/mpc512x.h   Heiko Schocher
• [U-Boot] [PATCH 22/29] cpu/mpc512x/i2c.c: use immr offsets from C struct instead of #define   Heiko Schocher
• [U-Boot] [PATCH 23/29] cpu/mpc512x/i2c.c: use I/O accessors instead of pointer accesses   Heiko Schocher
• [U-Boot] [PATCH 22/29] cpu/mpc512x/i2c.c: use immr offsets from C struct instead of #define   Heiko Schocher
• [U-Boot] [PATCH v2] MPC8260: fixup device tree by property instead of path   Heiko Schocher
• [U-Boot] [PATCH v2] MPC8260: fixup device tree by property instead of path   Heiko Schocher
• [U-Boot] onenand bad block handling   Amit Kumar Sharma
• [U-Boot] usbtty Support on AT91SAM9XXX chipsets   Daniel Sherwood
• [U-Boot] usbtty Support on AT91SAM9XXX chipsets   Daniel Sherwood
• [U-Boot] Memory problems on mpc8572ds   Sebastian Andrzej Siewior
• [U-Boot] Memory problems on mpc8572ds   Sebastian Andrzej Siewior
• [U-Boot] Memory problems on mpc8572ds   Sebastian Andrzej Siewior
• [U-Boot] Xilinx SPI driver   Michal Simek
• [U-Boot] [PATCH 2/4] macb: add set_hw_enetaddr support   Haavard Skinnemoen
• [U-Boot] [PATCH 06/13] Add support for the AT91RM9200EK Board.   Haavard Skinnemoen
• [U-Boot] [RFC] initcall mechanism introduction   Haavard Skinnemoen
• [U-Boot] my u-boot freezing at Uncompress Linux...   SlinceArm
• [U-Boot] my u-boot freezing at Uncompress Linux...   SlinceArm
• [U-Boot] MII register display   Jon Smirl
• [U-Boot] MII register display   Jon Smirl
• [U-Boot] MII register display   Jon Smirl
• [U-Boot] [PATCH V2] board support patch for phyCORE-MPC5200B-tiny   Jon Smirl
• [U-Boot] [PATCH 00/11] 85xx/86xx dma updates   Ira Snyder
• [U-Boot] [PATCH 00/11] 85xx/86xx dma updates   Ira Snyder
• [U-Boot] [RFC/PATCH] 83xx: Add support for using the fsl_dma driver   Ira Snyder
• [U-Boot] Access JFFS2 partition from U-Boot   Guillaume Spalla
• [U-Boot] Support in u-boot for PCI-Express NIC   Srinivasan Srikanth-R9AABP
• [U-Boot] Support in u-boot for PCI-Express NIC   Srinivasan Srikanth-R9AABP
• [U-Boot] [PATCH 1/4] net: extend the netdev to have a common way to set the hw mac address   Daniel Stenberg
• [U-Boot] Help!Some memory doesn't work on PPC405Ex based board!   SunNeo
• [U-Boot] Cross-compiling U-Boot on Mac OS X -- can't find crc32.c?   Timur Tabi
• [U-Boot] Cross-compiling U-Boot on Mac OS X -- can't find crc32.c?   Timur Tabi
• [U-Boot] Cross-compiling U-Boot on Mac OS X -- can't find crc32.c?   Timur Tabi
• [U-Boot] Cross-compiling U-Boot on Mac OS X -- can't find crc32.c?   Timur Tabi
• [U-Boot] uboot relocate_code() function   Timur Tabi
• [U-Boot] Cross-compiling U-Boot on Mac OS X -- can't find crc32.c?   Timur Tabi
• [U-Boot] Cross-compiling U-Boot on Mac OS X -- can't find crc32.c?   Timur Tabi
• [U-Boot] Cross-compiling U-Boot on Mac OS X -- can't find crc32.c?   Timur Tabi
• [U-Boot] [PATCH] 85xx: Always attempt ethernet device tree fixup   Timur Tabi
• [U-Boot] [PATCH 10/15 v2] Update the number of ethxaddr in reading system eeprom   Timur Tabi
• [U-Boot] [PATCH 00/11] 85xx/86xx dma updates   Timur Tabi
• [U-Boot] [PATCH 10/10] imx27lite: add support for imx27lite board from LogicPD   Paul Thomas
• [U-Boot] [PATCH 10/10] imx27lite: add support for imx27lite board from LogicPD   Paul Thomas
• [U-Boot] [PATCH 10/10] imx27lite: add support for imx27lite board from LogicPD   Paul Thomas
• [U-Boot] [PATCH 10/10] imx27lite: add support for imx27lite board from LogicPD   Paul Thomas
• [U-Boot] Hard SPI broken on mpc832x?   Joakim Tjernlund
• [U-Boot] [PATCH] 85xx: Fix the wrong SYS_CLK_IN for 8569MDS   Joakim Tjernlund
• [U-Boot] Nand driver acts different in two different settings   John Tobias
• [U-Boot] Zoom2 initial support rebased to arm/next   Tom
• [U-Boot] Zoom2 patch set on arm/next   Tom
• [U-Boot] [PATCH 3/6] OMAP3 Port kernel omap gpio interface.   Tom
• [U-Boot] [PATCH 5/6] ZOOM2 Add serial support.   Tom
• [U-Boot] [PATCH 5/6] ZOOM2 Add serial support.   Tom
• [U-Boot] [PATCH 5/6] ZOOM2 Add serial support.   Tom
• [U-Boot] [PATCH] OMAP3: Zoom2: Fix missing Board and CPU info   Tom
• [U-Boot] Zoom2 initial support.   Tom
• [U-Boot] powerpc: why call unlock_ram_in_cache() only for e500 cores and linux?   Peter Tyser
• [U-Boot] [PATCH 00/11] 85xx/86xx dma updates   Peter Tyser
• [U-Boot] [PATCH 01/11] fsl: Create common fsl_dma.h for 85xx and 86xx cpus   Peter Tyser
• [U-Boot] [PATCH 02/11] 85xx, 86xx: Sync up DMA code   Peter Tyser
• [U-Boot] [PATCH 03/11] 85xx, 86xx: Break out DMA code to a common file   Peter Tyser
• [U-Boot] [PATCH 04/11] fsl_dma: Add bitfield definitions for common registers   Peter Tyser
• [U-Boot] [PATCH 05/11] fsl_dma: Update to use proper I/O accessor functions   Peter Tyser
• [U-Boot] [PATCH 06/11] fsl_dma: Add support for arbitrarily large transfers   Peter Tyser
• [U-Boot] [PATCH 07/11] fsl_dma: Fix Channel Start bug in dma_check()   Peter Tyser
• [U-Boot] [PATCH 08/11] 8xxx: Rename dma_xfer() to dmacpy()   Peter Tyser
• [U-Boot] [PATCH 09/11] fsl_dma: Move dma function prototypes to common header file   Peter Tyser
• [U-Boot] [PATCH 10/11] 85xx, 86xx: Move dma_init() call to common code   Peter Tyser
• [U-Boot] [PATCH 11/11] fsl_dma: Break out common memory initialization function   Peter Tyser
• [U-Boot] [RFC/PATCH 0/3] Add optional dma transfers to mtest   Peter Tyser
• [U-Boot] [RFC/PATCH 1/3] fsl_dma: Make DMA transactions snoopable   Peter Tyser
• [U-Boot] [RFC/PATCH 2/3] mtest: Add optional support for DMA memory test   Peter Tyser
• [U-Boot] [RFC/PATCH 3/3] XPedite5200, XPedite5370: Enable DMA memory test   Peter Tyser
• [U-Boot] [PATCH 08/11] 8xxx: Rename dma_xfer() to dmacpy()   Peter Tyser
• [U-Boot] [PATCH 00/11] 85xx/86xx dma updates   Peter Tyser
• [U-Boot] [PATCH 0/7] Initial support for the XPedite5170   Peter Tyser
• [U-Boot] [PATCH 1/7] 85xx: Add PORBMSR and PORDEVSR shift defines   Peter Tyser
• [U-Boot] [PATCH 2/7] tsec: Add support for BCM5482S PHY   Peter Tyser
• [U-Boot] [PATCH 3/7] 86xx: Unlock l1 cache unconditionally   Peter Tyser
• [U-Boot] [PATCH 4/7] xes: Update Freescale PCI code to work with 86xx processors   Peter Tyser
• [U-Boot] [PATCH 5/7] xes: Update Freescale DDR code to work with 86xx processors   Peter Tyser
• [U-Boot] [PATCH 6/7] xes: Update Freescale clock code to work with 86xx processors   Peter Tyser
• [U-Boot] [PATCH 7/7] XPedite5170 board support   Peter Tyser
• [U-Boot] [RFC/PATCH] 83xx: Add support for using the fsl_dma driver   Peter Tyser
• [U-Boot] [PATCH 1/2] 83xx: Replace CONFIG_MPC83XX with CONFIG_MPC83xx   Peter Tyser
• [U-Boot] [PATCH 2/2] 83xx: Replace CONFIG_MPC83[0-9]X with MPC83[0-9]x   Peter Tyser
• [U-Boot] [PATCH 1/2] 83xx: Replace CONFIG_MPC83XX with CONFIG_MPC83xx   Peter Tyser
• [U-Boot] (no subject)   UKL-DEPT
• [U-Boot] Auto Boot ELF image using NFS   Zvi Vered
• [U-Boot] Booting X86 using uboot   Zvi Vered
• [U-Boot] What mkimage arguments for standalone AVR32 app?   Jesper Vestergaard
• [U-Boot] What mkimage arguments for standalone AVR32 app?   Jesper Vestergaard
• [U-Boot] [PATCH 3/6] mpc83xx: USB: Reorganized its support   Mahajan Vivek-B08308
• [U-Boot] [PATCH 1/8] Add simple hwconfig infrastructure   Anton Vorontsov
• [U-Boot] [PATCH 4/6] fsl_esdhc: Add device tree fixups   Anton Vorontsov
• [U-Boot] [PATCH v4] Marvell MV88F6281GTW_GE Board support   Prafulla Wadaskar
• [U-Boot] [PATCH v4] Marvell Kirkwood family SOC support   Prafulla Wadaskar
• [U-Boot] [PATCH v5] Marvell Kirkwood family SOC support   Prafulla Wadaskar
• [U-Boot] [PATCH v5] Marvell MV88F6281GTW_GE Board support   Prafulla Wadaskar
• [U-Boot] [PATCH v4] Marvell Kirkwood family SOC support   Prafulla Wadaskar
• [U-Boot] [PATCH v5] Marvell MV88F6281GTW_GE Board support   Prafulla Wadaskar
• [U-Boot] [PATCH v5] Marvell MV88F6281GTW_GE Board support   Prafulla Wadaskar
• [U-Boot] [PATCH v6] Marvell Kirkwood family SOC support   Prafulla Wadaskar
• [U-Boot] [PATCH v9] Marvell MV88E61XX Switch Driver support   Prafulla Wadaskar
• [U-Boot] [PATCH v6] Marvell MV88F6281GTW_GE Board support   Prafulla Wadaskar
• [U-Boot] [PATCH v2] Gbe Controller driver support for kirkwood SOCs   Prafulla Wadaskar
• [U-Boot] [PATCH v9] Marvell MV88E61XX Switch Driver support   Prafulla Wadaskar
• [U-Boot] [PATCH v9] Marvell MV88E61XX Switch Driver support   Prafulla Wadaskar
• [U-Boot] [PATCH v6] Marvell MV88F6281GTW_GE Board support   Prafulla Wadaskar
• [U-Boot] [PATCH v6] Marvell Kirkwood family SOC support   Prafulla Wadaskar
• [U-Boot] [PATCH v6] Marvell Kirkwood family SOC support   Prafulla Wadaskar
• [U-Boot] Micrel Switch KS8995M Driver   Prafulla Wadaskar
• [U-Boot] [PATCH v6] Marvell Kirkwood family SOC support   Prafulla Wadaskar
• [U-Boot] [PATCH v7] Marvell MV88F6281GTW_GE Board support   Prafulla Wadaskar
• [U-Boot] [PATCH v2] Gbe Controller driver support for kirkwood SOCs   Prafulla Wadaskar
• [U-Boot] [PATCH v2] Gbe Controller driver support for kirkwood SOCs   Prafulla Wadaskar
• [U-Boot] [PATCH v10] Marvell MV88E61XX Switch Driver support   Prafulla Wadaskar
• [U-Boot] [PATCH v7] Marvell Kirkwood family SOC support   Prafulla Wadaskar
• [U-Boot] [PATCH v7.1] Marvell Kirkwood family SOC support   Prafulla Wadaskar
• [U-Boot] [PATCH v8] Marvell MV88F6281GTW_GE Board support   Prafulla Wadaskar
• [U-Boot] [PATCH v3] Gbe Controller driver support for kirkwood SOCs   Prafulla Wadaskar
• [U-Boot] [PATCH v9] Marvell MV88F6281GTW_GE Board support   Prafulla Wadaskar
• [U-Boot] [PATCH v8] Marvell Kirkwood family SOC support   Prafulla Wadaskar
• [U-Boot] [PATCH v8] Marvell Kirkwood family SOC support   Prafulla Wadaskar
• [U-Boot] [PATCH v9] Marvell MV88F6281GTW_GE Board support   Prafulla Wadaskar
• [U-Boot] [PATCH v8] Marvell Kirkwood family SOC support   Prafulla Wadaskar
• [U-Boot] [PATCH v9] Marvell MV88F6281GTW_GE Board support   Prafulla Wadaskar
• [U-Boot] [PATCH v8] Marvell Kirkwood family SOC support   Prafulla Wadaskar
• [U-Boot] [PATCH v8] Marvell Kirkwood family SOC support   Prafulla Wadaskar
• [U-Boot] [PATCH v9] Marvell MV88F6281GTW_GE Board support   Prafulla Wadaskar
• [U-Boot] [PATCH v8] Marvell Kirkwood family SOC support   Prafulla Wadaskar
• [U-Boot] [PATCH v9] Marvell Kirkwood family SOC support   Prafulla Wadaskar
• [U-Boot] [PATCH v10] Marvell MV88F6281GTW_GE Board support   Prafulla Wadaskar
• [U-Boot] [PATCH] Marvell 88EXXXX Switch/PHY init support   Prafulla Wadaskar
• [U-Boot] [PATCH] Marvell 88EXXXX Switch/PHY init support   Prafulla Wadaskar
• [U-Boot] [PATCH v10] Marvell Kirkwood family SOC support   Prafulla Wadaskar
• [U-Boot] [PATCH] Marvell Sheevaplug Board support   Prafulla Wadaskar
• [U-Boot] [PATCH] Marvell MV88E1116 PHY Driver support   Prafulla Wadaskar
• [U-Boot] [PATCH v4] Gbe Controller driver support for kirkwood SOCs   Prafulla Wadaskar
• [U-Boot] [PATCH v8] Marvell Kirkwood family SOC support   Prafulla Wadaskar
• [U-Boot] [PATCH v10] Marvell MV88F6281GTW_GE Board support   Prafulla Wadaskar
• [U-Boot] [PATCH] Marvell Sheevaplug Board support   Prafulla Wadaskar
• [U-Boot] [PATCH] Marvell Sheevaplug Board support   Prafulla Wadaskar
• [U-Boot] [PATCH v10] Marvell MV88F6281GTW_GE Board support   Prafulla Wadaskar
• [U-Boot] [PATCH v1] Marvell Sheevaplug Board support   Prafulla Wadaskar
• [U-Boot] [PATCH v11] Marvell MV88F6281GTW_GE Board support   Prafulla Wadaskar
• [U-Boot] [PATCH v10] Marvell MV88F6281GTW_GE Board support   Prafulla Wadaskar
• [U-Boot] [PATCH v10] Marvell MV88F6281GTW_GE Board support   Prafulla Wadaskar
• [U-Boot] [PATCH v10] Marvell Kirkwood family SOC support   Prafulla Wadaskar
• [U-Boot] [PATCH v2] Gbe Controller driver support for kirkwood SOCs   Prafulla Wadaskar
• [U-Boot] [PATCH v4] Gbe Controller driver support for kirkwood SOCs   Prafulla Wadaskar
• [U-Boot] [PATCH v10] Marvell Kirkwood family SOC support   Prafulla Wadaskar
• [U-Boot] [PATCH v10] Marvell Kirkwood family SOC support   Prafulla Wadaskar
• [U-Boot] [PATCH v10] Marvell Kirkwood family SOC support NAND discussion   Prafulla Wadaskar
• [U-Boot] [PATCH v4] Gbe Controller driver support for kirkwood SOCs   Prafulla Wadaskar
• [U-Boot] [PATCH] cpu_misc_init support for ARM architectures   Prafulla Wadaskar
• [U-Boot] [PATCH] arm: generic cache.h for ARM architectures   Prafulla Wadaskar
• [U-Boot] [PATCH] arm: Kirkwood: Basic SOCs support   Prafulla Wadaskar
• [U-Boot] [PATCH] spi: Add Marvell Kirkwood SPI driver   Prafulla Wadaskar
• [U-Boot] [PATCH] nand: Add Marvell Kirkwood NAND driver   Prafulla Wadaskar
• [U-Boot] [PATCH] net: Add Marvell Kirkwood gigabit ethernet driver   Prafulla Wadaskar
• [U-Boot] [PATCH] Marvell MV88F6281GTW_GE Board support   Prafulla Wadaskar
• [U-Boot] [PATCH] Marvell Sheevaplug Board support   Prafulla Wadaskar
• [U-Boot] [PATCH] cpu_misc_init support for ARM architectures   Prafulla Wadaskar
• [U-Boot] [PATCH] Marvell Sheevaplug Board support   Prafulla Wadaskar
• [U-Boot] [PATCH] net: Add Marvell Kirkwood gigabit ethernet driver   Prafulla Wadaskar
• [U-Boot] [PATCH] arm: Kirkwood: Basic SOCs support   Prafulla Wadaskar
• [U-Boot] [PATCH v2] arch_misc_init support for ARM architectures   Prafulla Wadaskar
• [U-Boot] [PATCH v2] nand: Add Marvell Kirkwood NAND driver   Prafulla Wadaskar
• [U-Boot] [PATCH v2] Marvell Sheevaplug Board support   Prafulla Wadaskar
• [U-Boot] [PATCH 1/9 v2] MPC85xx: Add QE clk support for mpc85xx platforms   Haiying Wang
• [U-Boot] [PATCH 01/15] MPC85xx: Add QE clk support   Haiying Wang
• [U-Boot] [PATCH 02/15] MPC85xx: Fix MURAM size for MPC8569   Haiying Wang
• [U-Boot] [PATCH 03/15] MPC85xx: Fix some settings for MPC8569MDS board   Haiying Wang
• [U-Boot] [PATCH 04/15] MPC85xx: Add PIB support at CS4/CS5 for MPC8569MDS   Haiying Wang
• [U-Boot] [PATCH 05/15] MPC85xx: Add UART1 support for MPC8569MDS   Haiying Wang
• [U-Boot] [PATCH 06/15] drivers/qe: Change QE RISC ALLOCATION to support 4 RISCs   Haiying Wang
• [U-Boot] [PATCH 07/15] drivers/qe: Add more SNUM number for QE   Haiying Wang
• [U-Boot] [PATCH 08/15] MPC85xx: Add UEC3 and UEC4 support for MPC8569MDS   Haiying Wang
• [U-Boot] [PATCH 00/15] patchset for QE UEC and MPC8569MDS   Haiying Wang
• [U-Boot] [PATCH 09/15] MPC85xx: Add RMII support for MPC8569MDS   Haiying Wang
• [U-Boot] [PATCH 10/15] Update the number of ethxaddr in reading system eeprom   Haiying Wang
• [U-Boot] [PATCH 11/15] MPC85xx: update uec to support up to 8 UECs in QE   Haiying Wang
• [U-Boot] [PATCH 12/15] drivers/qe: add sgmii support in for UEC driver   Haiying Wang
• [U-Boot] [PATCH 13/15] MPC85xx: Add UEC6 and UEC8 at SGMII mode for MPC8569MDS   Haiying Wang
• [U-Boot] [PATCH 14/15] MPC85xx: Add README for MPC8569MDS   Haiying Wang
• [U-Boot] [PATCH 15/15] 85xx: Fix the wrong BCSR address of MPC8569MDS   Haiying Wang
• [U-Boot] [PATCH] drivers/qe: Rename the camel-case identifiers in uec   Haiying Wang
• [U-Boot] [PATCH 06/15 v2] drivers/qe: Change QE RISC ALLOCATION to support 4 RISCs   Haiying Wang
• [U-Boot] [PATCH 10/15 v2] Update the number of ethxaddr in reading system eeprom   Haiying Wang
• [U-Boot] [PATCH 10/15 v3] Update the number of ethxaddr in reading system eeprom   Haiying Wang
• [U-Boot] Disable features   Ben Warren
• [U-Boot] [PATCH] ARM DaVinci:Adding DM365 Support   Ben Warren
• [U-Boot] [patch] Convert DM9000 driver for CONFIG_NET_MULTI   Ben Warren
• [U-Boot] [Bug] IXP425 and e1000 network driver   Ben Warren
• [U-Boot] [PATCH v5] Marvell MV88F6281GTW_GE Board support   Ben Warren
• [U-Boot] [PATCH 1/1] Add config option for disabling DM9000-SROM support.   Ben Warren
• [U-Boot] [PATCH v5] Marvell MV88F6281GTW_GE Board support   Ben Warren
• [U-Boot] [PATCH v5] Marvell MV88F6281GTW_GE Board support   Ben Warren
• [U-Boot] [PATCH] ARM DaVinci:Adding DM365 Support   Ben Warren
• [U-Boot] PPC4xx without CONFIG_NET_MULTI   Ben Warren
• [U-Boot] [PATCH v9] Marvell MV88E61XX Switch Driver support   Ben Warren
• [U-Boot] [PATCH 2/2][Net][ppc4xx] Remove support for non-CONFIG_NET_MULTI on PPC4xx EMAC   Ben Warren
• [U-Boot] [PATCH 03/10] fec_imx27: driver for FEC ethernet controller on i.MX27   Ben Warren
• [U-Boot] [PATCH 1/4] net: extend the netdev to have a common way to set the hw mac address   Ben Warren
• [U-Boot] [PATCH 2/4] macb: add set_hw_enetaddr support   Ben Warren
• [U-Boot] [PATCH 3/4] net/dm9000: move the CONFIG_NET_MULTI api   Ben Warren
• [U-Boot] [PATCH 4/4] at91/macb: remove reset_phy callback   Ben Warren
• [U-Boot] [PATCH v2] Gbe Controller driver support for kirkwood SOCs   Ben Warren
• [U-Boot] [PATCH 0/3][Net][ARM] Davinci Ethernet driver cleanup   Ben Warren
• [U-Boot] Help with driver for a ethernet switch   Ben Warren
• [U-Boot] Ethernet not working on OMAP3 board with   Ben Warren
• [U-Boot] [PATCH 3/3] net: switch device init to initcall   Ben Warren
• [U-Boot] [PATCH 3/3] net: switch device init to initcall   Ben Warren
• [U-Boot] [PATCH] DaVinci Network Driver Updates   Ben Warren
• [U-Boot] [PATCH v2] Gbe Controller driver support for kirkwood SOCs   Ben Warren
• [U-Boot] [PATCH-ARM] Add support for Embest SBC2440-II Board   Ben Warren
• [U-Boot] [PATCH 3/7] fec_imx27: driver for FEC ethernet controller on i.MX27   Ben Warren
• [U-Boot] Subject: [PATCH] Standardize the use of MCFFEC_TOUT_LOOP as a udelay(1) loop counter.   Ben Warren
• [U-Boot] [PATCH v10] Marvell MV88E61XX Switch Driver support   Ben Warren
• [U-Boot] [PATCH v4] Gbe Controller driver support for kirkwood SOCs   Ben Warren
• [U-Boot] [PATCH v2] Gbe Controller driver support for kirkwood SOCs   Ben Warren
• [U-Boot] [PATCH v2 08/10] MPC512x FEC: get rid of duplicated struct ethernet_regs   Ben Warren
• [U-Boot] [PATCH 2/2][Net][ppc4xx] Remove support for non-CONFIG_NET_MULTI on PPC4xx EMAC   Ben Warren
• [U-Boot] [PATCH v2 0/3][Net][ARM] Davinci Ethernet driver cleanup   Ben Warren
• [U-Boot] [PATCH v2 1/3][Net][ARM] Moved Davinci Ethernet driver to drivers/net   Ben Warren
• [U-Boot] [PATCH v2 2/3][Net][ARM] Initial cleanup of Davinci Ethernet driver   Ben Warren
• [U-Boot] [PATCH v2 3/3][Net][ARM] Switched dm644x_emac Ethernet driver to use newer API   Ben Warren
• [U-Boot] [PATCH v2 0/3][Net][ARM] Davinci Ethernet driver cleanup   Ben Warren
• [U-Boot] [PATCH v2 08/10] MPC512x FEC: get rid of duplicated struct ethernet_regs   Ben Warren
• [U-Boot] [PATCH] net: Add Marvell Kirkwood gigabit ethernet driver   Ben Warren
• [U-Boot] [PATCH] Marvell MV88E1116 PHY Driver support   Ben Warren
• [U-Boot] PCIe on Kilauea   Weirich, Bernhard
• [U-Boot] PCIe on Kilauea   Weirich, Bernhard
• [U-Boot] Cpngratulations!!!   Lotto Winner's
• [U-Boot] [PATCH 4/6] fsl_esdhc: Add device tree fixups   Scott Wood
• [U-Boot] [PATCH 4/6] fsl_esdhc: Add device tree fixups   Scott Wood
• [U-Boot] [PATCH] ARM DaVinci: Changing ALE Mask Value   Scott Wood
• [U-Boot] [STATUS] v2009.06-rc1 is out   Scott Wood
• [U-Boot] [PATCH] include/ns16550.h: Unify structure declaration for registers   Scott Wood
• [U-Boot] [PATCH] arm920t kgdb serial support   Scott Wood
• [U-Boot] [PATCH v2] mtd: nand: new base driver for memory mapped nand devices   Scott Wood
• [U-Boot] [PATCH v2] mtd: nand: new base driver for memory mapped nand devices   Scott Wood
• [U-Boot] [PATCH v3] mtd: nand: new base driver for memory mapped nand devices   Scott Wood
• [U-Boot] [PATCH] OMAP3EVM: net_chip uses CS5 not CS6   Scott Wood
• [U-Boot] [PATCH] ppc4xx: Add Sequoia RAM-booting target   Scott Wood
• [U-Boot] [PATCH] OMAP3EVM: net_chip uses CS5 not CS6   Scott Wood
• [U-Boot] [PATCH] OMAP3EVM: net_chip uses CS5 not CS6   Scott Wood
• [U-Boot] [PATCH 2/3] OMAP3: Rename interrupts.c to timer.c   Scott Wood
• [U-Boot] [PATCH 2/3] OMAP3: Rename interrupts.c to timer.c   Scott Wood
• [U-Boot] [patch u-boot-git 2/2] davinci_nand: cleanup II (CONFIG_SYS_DAVINCI_BROKEN_ECC )   Scott Wood
• [U-Boot] uboot relocate_code() function   Scott Wood
• [U-Boot] [PATCH v4] mtd: nand: new base driver for memory mapped nand devices   Scott Wood
• [U-Boot] [PATCH] NAND DaVinci: Update to ALE/CLE Mask values   Scott Wood
• [U-Boot] [patch nand/next] davinci_nand chipselect/init cleanup   Scott Wood
• [U-Boot] [PATCH] Add +size syntax to nand commands to pad lengths to page sizes.   Scott Wood
• [U-Boot] [PATCH] mtd: Update MTD infrastructure to support 64bit device size   Scott Wood
• [U-Boot] [PATCH] Add +size syntax to nand commands to pad lengths to page sizes.   Scott Wood
• [U-Boot] [PATCH v2 1/3] MX31: Add NAND SPL for i.MX31.   Scott Wood
• [U-Boot] [PATCH 1/4] net: extend the netdev to have a common way to set the hw mac address   Scott Wood
• [U-Boot] [PATCH 1/4] net: extend the netdev to have a common way to set the hw mac address   Scott Wood
• [U-Boot] [PATCH 2/2] KB9202: Add NAND support   Scott Wood
• [U-Boot] [PATCH 01/10] mx27: basic cpu support   Scott Wood
• [U-Boot] [PATCH 2/2] KB9202: Add NAND support   Scott Wood
• [U-Boot] [PATCH v5] mtd: nand: new base driver for memory mapped nand devices   Scott Wood
• [U-Boot] [PATCH] nand_init: use loff_t for offset   Scott Wood
• [U-Boot] [PATCH] fix accidental erase of OneNand whole chip   Scott Wood
• [U-Boot] [PATCH 1/2] env_nand: remove unused variable.   Scott Wood
• [U-Boot] [PATCH 2/2] nand_spl: read environment early, when booting from NAND using nand_spl   Scott Wood
• [U-Boot] [PATCH 1/3] ppc4xx: Move definition for PPC4xx NAND FLASH controller to header   Scott Wood
• [U-Boot] bootstrap nand write function   Scott Wood
• [U-Boot] [PATCH 08/11] 8xxx: Rename dma_xfer() to dmacpy()   Scott Wood
• [U-Boot] [RFC/PATCH] jffs2/mtdparts: Fix problem with usage from JFFS2 and MTDPARTS together   Scott Wood
• [U-Boot] Auto-booting problem   Scott Wood
• [U-Boot] [RFC] initcall mechanism introduction   Scott Wood
• [U-Boot] [U-BOOT] nand merge problem   Scott Wood
• [U-Boot] [PATCH v10] Marvell Kirkwood family SOC support NAND discussion   Scott Wood
• [U-Boot] [RFC] initcall mechanism introduction   Scott Wood
• [U-Boot] [U-BOOT] nand merge problem   Scott Wood
• [U-Boot] itoa(), base of 16   Scott Wood
• [U-Boot] hi,guys,about the nand flash driver   Scott Wood
• [U-Boot] [PATCH] nand: Add Marvell Kirkwood NAND driver   Scott Wood
• [U-Boot] [PATCH v6] mtd: nand: new base driver for memory mapped nand devices   Scott Wood
• [U-Boot] [PATCH v2 1/3] MX31: Add NAND SPL for i.MX31.   Scott Wood
• [U-Boot] [PATCH] Add a + prefix form to nand commands.   Scott Wood
• [U-Boot] [PATCH] nand/onenand: Fix missing argument checking for "markbad" command   Scott Wood
• [U-Boot] [PATCH 00/10] Support for LogicPD i.MX27-LITEKIT development board   Ilya Yanok
• [U-Boot] [PATCH 01/10] mx27: basic cpu support   Ilya Yanok
• [U-Boot] [PATCH 02/10] serial_mx31: allow it to work with mx27 too   Ilya Yanok
• [U-Boot] [PATCH 03/10] fec_imx27: driver for FEC ethernet controller on i.MX27   Ilya Yanok
• [U-Boot] [PATCH 04/10] mxc_nand: add nand driver for MX2/MX3   Ilya Yanok
• [U-Boot] [PATCH 05/10] mxc-mmc: sdhc host driver for MX2 and MX3 proccessor   Ilya Yanok
• [U-Boot] [PATCH 06/10] arm: add support for CONFIG_GENERIC_MMC   Ilya Yanok
• [U-Boot] [PATCH 07/10] mmc: use lldiv() for 64-bit division   Ilya Yanok
• [U-Boot] [PATCH 08/10] mmc: some endianess fixes for generic mmc subsystem   Ilya Yanok
• [U-Boot] [PATCH 09/10] mmc: fix mmcinfo command   Ilya Yanok
• [U-Boot] [PATCH 10/10] imx27lite: add support for imx27lite board from LogicPD   Ilya Yanok
• [U-Boot] [PATCH 01/10] mx27: basic cpu support   Ilya Yanok
• [U-Boot] [PATCH 01/10] mx27: basic cpu support   Ilya Yanok
• [U-Boot] [PATCH] mmc: it's safe to ignore mmc_send_if_cond() return value   Ilya Yanok
• [U-Boot] [PATCH 01/10] mx27: basic cpu support   Ilya Yanok
• [U-Boot] [PATCH] mmc: it's safe to ignore mmc_send_if_cond() return value   Ilya Yanok
• [U-Boot] [PATCH] mmc: it's safe to ignore mmc_send_if_cond() return value   Ilya Yanok
• [U-Boot] [PATCH] mmc: it's safe to ignore mmc_send_if_cond() return value   Ilya Yanok
• [U-Boot] [PATCH] mmc: it's safe to ignore mmc_send_if_cond() return value   Ilya Yanok
• [U-Boot] [PATCH 00/10][v2] Support for LogicPD i.MX27-LITEKIT development board   Ilya Yanok
• [U-Boot] [PATCH 1/7] mx27: basic cpu support   Ilya Yanok
• [U-Boot] [PATCH 2/7] serial_mx31: allow it to work with mx27 too and rename to serial_mxc   Ilya Yanok
• [U-Boot] [PATCH 3/7] fec_imx27: driver for FEC ethernet controller on i.MX27   Ilya Yanok
• [U-Boot] [PATCH 4/7] mxc_nand: add nand driver for MX2/MX3   Ilya Yanok
• [U-Boot] [PATCH 5/7] mxc-mmc: sdhc host driver for MX2 and MX3 proccessor   Ilya Yanok
• [U-Boot] [PATCH 6/7] arm: add support for CONFIG_GENERIC_MMC   Ilya Yanok
• [U-Boot] [PATCH 7/7] imx27lite: add support for imx27lite board from LogicPD   Ilya Yanok
• [U-Boot] [PATCH 0/7][v2] Support for LogicPD i.MX27-LITEKIT development board   Ilya Yanok
• [U-Boot] [PATCH 10/10] imx27lite: add support for imx27lite board from LogicPD   Ilya Yanok
• [U-Boot] Uboot bitmap utility   Steven Zedeck
• [U-Boot] [PATCH] include/ns16550.h: Unify structure declaration for registers   Detlev Zundel
• [U-Boot] hello, how to git a clone from http://git.denx.de/   Detlev Zundel
• [U-Boot] [PATCH] include/ns16550.h: Unify structure declaration for registers   Detlev Zundel
• [U-Boot] [PATCH] powerpc/inka4x0: Remove left-over ide reset code.   Detlev Zundel
• [U-Boot] [PATCH] arm/imx31_phycore: Fix bi_arch_number   Detlev Zundel
• [U-Boot] [PATCH] ppc4xx: Add Sequoia RAM-booting target   Detlev Zundel
• [U-Boot] [PATCH] ppc4xx: Add Sequoia RAM-booting target   Detlev Zundel
• [U-Boot] [PATCH] OMAP3EVM: net_chip uses CS5 not CS6   Detlev Zundel
• [U-Boot] [PATCH] ppc4xx: Add Sequoia RAM-booting target   Detlev Zundel
• [U-Boot] [PATCH 1/4] net: extend the netdev to have a common way to set the hw mac address   Detlev Zundel
• [U-Boot] uboot kernel rejects filesystem   Detlev Zundel
• [U-Boot] [PATCH 1/4] net: extend the netdev to have a common way to set the hw mac address   Detlev Zundel
• [U-Boot] [PATCH] mtd: MTD related config header changes (mtdparts command)   Detlev Zundel
• [U-Boot] start.s file   Detlev Zundel
• [U-Boot] uboot kernel rejects filesystem   Detlev Zundel
• [U-Boot] [PATCH 1/4] net: extend the netdev to have a common way to set the hw mac address   Detlev Zundel
• [U-Boot] [PATCH 1/4] net: extend the netdev to have a common way to set the hw mac address   Detlev Zundel
• [U-Boot] [PATCH] Fix e-mail address of Gary Jennejohn.   Detlev Zundel
• [U-Boot] [PATCH] lib_arch/board.c: Move malloc initialization before flash_init()   Detlev Zundel
• [U-Boot] [PATCH v2] MPC8260: fixup device tree by property instead of path   Detlev Zundel
• [U-Boot] [PATCH] powerpc/inka4x0: Remove left-over ide reset code.   Detlev Zundel
• [U-Boot] [PATCH] powerpc/inka4x0: Remove left-over ide reset code.   Detlev Zundel
• [U-Boot] [PATCH 1/4] net: extend the netdev to have a common way to set the hw mac address   Detlev Zundel
• [U-Boot] uboot kernel rejects filesystem   Detlev Zundel
• [U-Boot] uboot kernel rejects filesystem   Detlev Zundel
• [U-Boot] u-boot version   Detlev Zundel
• [U-Boot] uboot kernel rejects filesystem   Detlev Zundel
• [U-Boot] Not getting the Uboot prompt for sbc2410x using u-boot1.1.6   Detlev Zundel
• [U-Boot] my u-boot freezing at Uncompress Linux...   Detlev Zundel
• [U-Boot] how to use a function provided by u-boot in linux driver   Detlev Zundel
• [U-Boot] U-boot common/environment.c   Detlev Zundel
• [U-Boot] u-boot version   Detlev Zundel
• [U-Boot] my u-boot freezing at Uncompress Linux...   Detlev Zundel
• [U-Boot] 1-80 in 6 days 17 hours   noreply at ageofexploits.com
• [U-Boot] mtdparts and JFFS2   Renaud barbier
• [U-Boot] Dearest,   hind bare
• [U-Boot] Congratulations   wilsonbusiness at bellnet.ca
• [U-Boot] |>entists Database in the USA   cafeteria
• [U-Boot] Not getting the Uboot prompt for sbc2410x using u-boot1.1.6   vishal dahiwal
• [U-Boot] [PATCH] Trizeps IV adaptation to changes in dm9000 driver   sbabic at denx.de
• [U-Boot] [PATCH 1/2] Make "usage" messages more helpful.   y at denx.de
• [U-Boot] [PATCH 2/2] General help message cleanup   y at denx.de
• [U-Boot] Please help for Data TLB Error in MPC8544   duckycool
• [U-Boot] Please help for Data TLB Error in MPC8544   duckycool
• [U-Boot] Please help for Data TLB Error in MPC8544   duckycool
• [U-Boot] [PATCH-ARM] Add support for Embest SBC2440-II Board   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] [PATCH-ARM v2] Add support for Embest SBC2440-II Board   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] hello, how to git a clone from http://git.denx.de/   vc_asm at hotmail.com
• [U-Boot] U-BOOT kgdb support for ARM920T (s3c2440)   barbalace at igi.cnr.it
• [U-Boot] U-BOOT kgdb support for ARM920T (s3c2440)   barbalace at igi.cnr.it
• [U-Boot] PATCH arm920t kgdb serial support   barbalace at igi.cnr.it
• [U-Boot] [PATCH] arm920t kgdb serial support   barbalace at igi.cnr.it
• [U-Boot] newbie problem.... please help   Benny k j
• [U-Boot] AMCC 405ex memory size issue   konamo
• [U-Boot] AMCC 405ex memory size issue   konamo
• [U-Boot] hi,guys,about the nand flash driver   lanmanck
• [U-Boot] Reply:Re: hi,guys,about the nand flash driver   lanmanck
• [U-Boot] (no subject)   xiaojing mao
• [U-Boot] Problem with u-boot debugging   mouse1
• [U-Boot] Congratulations   giseles at ns.sympatico.ca
• [U-Boot] Complement of the day   mrlile22 at optonline.net
• [U-Boot] Auto-booting problem   paras
• [U-Boot] Auto-booting problem   paras
• [U-Boot] make U-Boot quiet   simon polette
• [U-Boot] make U-Boot quiet   simon polette
• [U-Boot] Data transfer through Ethernet in u-boot.   prathika
• [U-Boot] Data transfer through Ethernet in u-boot.   prathika
• [U-Boot] Data transfer through Ethernet in u-boot.   prathika
• [U-Boot] LCD issue   yanfeng qin
• [U-Boot] How to change the entry point for standalone Applications same as the text section base address   ffmm rrcc
• [U-Boot] How to change the entry point for standalone Applications same as the text section base address   ffmm rrcc
• [U-Boot] U-boot -printk kernel crash dump using md on PDK   alfred steele
• [U-Boot] U-boot -printk kernel crash dump using md on PDK   alfred steele
• [U-Boot] U-boot -printk kernel crash dump using md on PDK   alfred steele
• [U-Boot] U-boot snapshot for commit dfc91c33957c95da34e3888dc87912d5c15a7603   alfred steele
• [U-Boot] U-boot -printk kernel crash dump using md on PDK   alfred steele
• [U-Boot] [PATCH 05/10] mxc-mmc: sdhc host driver for MX2 and MX3 proccessor   alfred steele
• [U-Boot] Unable to debug UBOOT   alfred steele
• [U-Boot] [PATCH 05/10] mxc-mmc: sdhc host driver for MX2 and MX3 proccessor   alfred steele
• [U-Boot] [PATCH] mmc: it's safe to ignore mmc_send_if_cond() return value   alfred steele
• [U-Boot] [PATCH] mmc: it's safe to ignore mmc_send_if_cond() return value   alfred steele
• [U-Boot] [PATCH] mmc: it's safe to ignore mmc_send_if_cond() return value   alfred steele
• [U-Boot] [PATCH] mmc: it's safe to ignore mmc_send_if_cond() return value   alfred steele
• [U-Boot] [PATCH] mmc: it's safe to ignore mmc_send_if_cond() return value   alfred steele
• [U-Boot] Uboot porting Cloning an existing board/processor configuration : Link errors   alfred steele
• [U-Boot] Clock frequency on a mx31 board   alfred steele
• [U-Boot] [PATCH] ARM DaVinci:Consolidate common u-boot.lds   s-paulraj at ti.com
• [U-Boot] [PATCH v4] ARM DaVinci Adding DM357 Support   s-paulraj at ti.com
• [U-Boot] [PATCH] ARM DaVinci: Minor Updates to base addresses   s-paulraj at ti.com
• [U-Boot] [PATCH] NAND DaVinci: Update to ALE/CLE Mask values   s-paulraj at ti.com
• [U-Boot] [PATCH v5] ARM DaVinci Adding DM357 Support   s-paulraj at ti.com
• [U-Boot] [PATCH] DaVinci Network Driver Updates   s-paulraj at ti.com
• [U-Boot] [PATCH] ARM DaVinci Leopard Board Support   s-paulraj at ti.com
• [U-Boot] [PATCH][u-boot arm/next] ARM DaVinci DM365 Support   s-paulraj at ti.com
• [U-Boot] [PATCH] ARM DaVinci Minor Change to header file   s-paulraj at ti.com
• [U-Boot] [PATCH] ARM DaVinci: Adding new Header file   s-paulraj at ti.com
• [U-Boot] Not getting the Uboot prompt for sbc2410x using u-boot1.1.6   vishalD
• [U-Boot] Reply:Re: hi,guys,about the nand flash driver   xiangfu
• [U-Boot] [U-BOot] new cpu(Ingenic), new board(PI)   xiangfu
• [U-Boot] [U-BOOT] nand merge problem   xiangfu
• [U-Boot] new cpu(Ingenic), new board(PI)   xiangfu_gmail
• [U-Boot] [U-BOOT] nand merge problem   xiangfu_gmail
• [U-Boot] [U-BOOT] nand merge problem   xiangfu_gmail
• [U-Boot] [U-BOOT] nand merge problem   xiangfu_gmail
• [U-Boot] How to read and write a normal file from and to the yaffs2 in u-boot-2009.03 ?   zhou.yanqing at zte.com.cn

Last message date: Sun May 31 23:45:42 CEST 2009
Archived on: Sun May 31 23:45:50 CEST 2009

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...