[U-Boot] [PATCH v4] Marvell Kirkwood family SOC support

[Jean-Christophe PLAGNIOL-VILLARD]

> +
> +	if ((!enable) || (bank > BANK3))
> +		return 0;
> +	result = 0xff000000 & readl(KW_REG_CPUCS_WIN_SZ(bank));
> +	result += 0x01000000;
> +	return result;
> +}
> diff --git a/cpu/arm926ejs/kirkwood/kwcore.c b/cpu/arm926ejs/kirkwood/kwcore.c
> new file mode 100644
> index 0000000..9eaaab6
> --- /dev/null
> +++ b/cpu/arm926ejs/kirkwood/kwcore.c
please cpu.c
> @@ -0,0 +1,284 @@
> +/*
> + * (C) Copyright 2009
> + * Marvell Semiconductor <www.marvell.com>
> + * Prafulla Wadaskar <prafulla at marvell.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301 USA
> + */

> diff --git a/cpu/arm926ejs/start.S b/cpu/arm926ejs/start.S
> index ed4932a..bdbb7e0 100644
> --- a/cpu/arm926ejs/start.S
> +++ b/cpu/arm926ejs/start.S
> @@ -139,7 +139,7 @@ reset:
>  	 * we do sys-critical inits only at reboot,
>  	 * not when booting from ram!
>  	 */
> -#ifndef CONFIG_SKIP_LOWLEVEL_INIT
> +#if !defined (CONFIG_SKIP_LOWLEVEL_INIT) || defined (CONFIG_ARCH_LOWLEVEL_INIT)
>  	bl	cpu_init_crit
>  #endif
>  
> @@ -201,7 +201,7 @@ _start_armboot:
>   *
>   *************************************************************************
>   */
> -#ifndef CONFIG_SKIP_LOWLEVEL_INIT
> +#if !defined (CONFIG_SKIP_LOWLEVEL_INIT) || defined (CONFIG_ARCH_LOWLEVEL_INIT)
NACK

if you skip the lowlevel init you also skip the arch lowlevel_init

if it's permannent arch init please use arch_cpu_init

Best regards,
J.