[U-Boot] map mtd partitions address for TWO NOR flash

[H. Johnny]

Hi guys:
   I have a mpc8313erbd (powerpc arch) demo board. There are one NOR
flash and one NAND flash on board.
The drivers/mtd/map/mpc8313erbd.c do address map for NOR flash. I want
to add another NOR flash and take off the NAND flash.
So there are two NOR flash on board.
   I am trying to do address map for two NOR flash but I don't know
how to. Some part of drivers/mtd/map/mpc8313erbd.c code is as
following:
   Do I need to add another mtd_partition structure ? How to assign
the partition_info to specific NOR flash (coz the two NOR flash are
the same)
BTW, I know u-boot can pass the mtdparts parameters to linux kernel.
Which mtd partition info linux kernel will use, u-boot mtdparts info
or static address map code ?
   thanks, regards.

static struct mtd_partition partition_info[]={
   {
       .name        = "U-Boot",
       .offset     = 0,
       .size        = 0x100000,
       .mask_flags = MTD_WRITEABLE
   },
   {
       .name        = "Kernel",
       .offset        = MTDPART_OFS_APPEND,
       .size        = 0x200000
   },
   {
       .name        = "JFFS2",
       .offset        = MTDPART_OFS_APPEND,
       .size        = 0x400000,
       },
   {
       .name        = "dtb",
       .offset        = MTDPART_OFS_APPEND,
       .size        = 0x100000,
   },
};

-- 
[To be different, do different. To be appear different, change the name.]
H. Johnny