[U-Boot] Data transfer through Ethernet in u-boot.
prathika
prathika at deeopl.com
Tue May 12 14:17:10 CEST 2009
Wolfgang Denk wrote:
> Dear prathika,
>
> please do not top post / full quote. Make sure to read and understand
> http://www.netmeister.org/news/learn2quote.html
>
>
> In message <4A08080E.6030605 at deeopl.com> you wrote:
>
>> You have mentioned to add the test code to the existing POST framework. In my hardware, I have CAN controller interfaced to SPI interface, SPI DACs, parallel ADCs, 1553B controller interfaced to EBC.
>> I have a CPLD to generate chip selects to these ICs.
>> If this test code will be useful, please let me to know how to add it to the POST framework.
>>
>
> Well, study the existing code and the documentation, than add your
> test code.
>
>
>> I understood that "tftp" command in u-boot has been coded only for receiving data from the PC and not to transmit, to PC.If this is the case should i add the transmit code to the "tftp" command?
>>
>
> Yes.
>
>> Even if I use this command for data transfer, what are the requirements for the application in PC side?
>>
>
> I don't understand this question?
>
--Here, I will be connecting my board through a GUI to a Windows
PC. I will interact using this GUI. Actually if I use "tftp"
command for file transfer, do I need some tftp client or server
running on my Windows PC?
Thanks & Regards,
Prathika R
More information about the U-Boot
mailing list