[U-Boot] [PATCH v5] Marvell Kirkwood family SOC support
Prafulla Wadaskar
prafulla at marvell.com
Sun May 3 06:35:06 CEST 2009
Kirkwood family controllers are highly integrated SOCs
based on Feroceon-88FR131/Sheeva-88SV131 cpu core.
SOC versions supported:-
1) 88F6281-A0 define CONFIG_KW88F6281_A0
2) 88F6192-A0 define CONFIG_KW88F6192_A0
Other supported features:-
1) get_random_hex() fucntion
2) SPI port controller driver
3) PCI Express port initialization
Contributors:
Yotam Admon <yotam at marvell.com>
Michael Blostein <michaelbl at marvell.com
Reviewed-by: Ronen Shitrit <rshitrit at marvell.com>
Signed-off-by: Prafulla Wadaskar <prafulla at marvell.com>
---
Change log:
v2: crated arch-kirkwood and moved some header files there
renamed and moved spi.c to drivers/spi/
renamed and moved serial.c to drivers/serial/
doimage utility removed
soc_init.S renamed as lowlevel_init.S
debug prints removed
v3: lowlevel_init.S converted to lowlevel_init.c
removed BITxx macros, removed entire assembly code
Added CONFIG_ARCH_LOWLEVE_INIT support for arm926ejs core
updated as per review commens for v2
v4: updated as per review comments for v3
print_cpuinfo used to display Soc info
arch_misc_init support created and used for lib_arm
mandatory readl/write macros used
asm/cache.h asm/arch/spi.h asm//arch/serial.h created and used
v5: updated as per review comments for v4
cosmetic updates, arch_misc_init and arch_cpu_init used
start.S updated to call arch_lowlevel_init in case if lowlevl_init is skipped
bug fix in cpu.c
cpu/arm926ejs/kirkwood/Makefile | 50 +++++
cpu/arm926ejs/kirkwood/config.mk | 25 +++
cpu/arm926ejs/kirkwood/cpu.c | 287 +++++++++++++++++++++++++++++
cpu/arm926ejs/kirkwood/cpu.h | 99 ++++++++++
cpu/arm926ejs/kirkwood/dram.c | 57 ++++++
cpu/arm926ejs/kirkwood/lowlevel_init.S | 43 +++++
cpu/arm926ejs/kirkwood/timer.c | 159 ++++++++++++++++
cpu/arm926ejs/start.S | 9 +-
drivers/serial/Makefile | 1 +
drivers/serial/kirkwood_serial.c | 128 +++++++++++++
drivers/spi/Makefile | 1 +
drivers/spi/kirkwood_spi.c | 167 +++++++++++++++++
include/asm-arm/arch-kirkwood/kirkwood.h | 118 ++++++++++++
include/asm-arm/arch-kirkwood/kw88f6192.h | 37 ++++
include/asm-arm/arch-kirkwood/kw88f6281.h | 37 ++++
include/asm-arm/arch-kirkwood/serial.h | 89 +++++++++
include/asm-arm/arch-kirkwood/spi.h | 39 ++++
include/asm-arm/cache.h | 49 +++++
include/asm-arm/config.h | 4 +
include/common.h | 1 +
lib_arm/board.c | 4 +
21 files changed, 1402 insertions(+), 2 deletions(-)
create mode 100644 cpu/arm926ejs/kirkwood/Makefile
create mode 100644 cpu/arm926ejs/kirkwood/config.mk
create mode 100644 cpu/arm926ejs/kirkwood/cpu.c
create mode 100644 cpu/arm926ejs/kirkwood/cpu.h
create mode 100644 cpu/arm926ejs/kirkwood/dram.c
create mode 100644 cpu/arm926ejs/kirkwood/lowlevel_init.S
create mode 100644 cpu/arm926ejs/kirkwood/timer.c
create mode 100644 drivers/serial/kirkwood_serial.c
create mode 100644 drivers/spi/kirkwood_spi.c
create mode 100644 include/asm-arm/arch-kirkwood/kirkwood.h
create mode 100644 include/asm-arm/arch-kirkwood/kw88f6192.h
create mode 100644 include/asm-arm/arch-kirkwood/kw88f6281.h
create mode 100644 include/asm-arm/arch-kirkwood/serial.h
create mode 100644 include/asm-arm/arch-kirkwood/spi.h
create mode 100644 include/asm-arm/cache.h
diff --git a/cpu/arm926ejs/kirkwood/Makefile b/cpu/arm926ejs/kirkwood/Makefile
new file mode 100644
index 0000000..db41d7c
--- /dev/null
+++ b/cpu/arm926ejs/kirkwood/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Prafulla Wadaskar <prafulla at marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC).a
+
+COBJS-y = dram.o
+COBJS-y += cpu.o
+COBJS-y += timer.o
+
+SOBJS = lowlevel_init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/cpu/arm926ejs/kirkwood/config.mk b/cpu/arm926ejs/kirkwood/config.mk
new file mode 100644
index 0000000..000eeb4
--- /dev/null
+++ b/cpu/arm926ejs/kirkwood/config.mk
@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Prafulla Wadaskar <prafulla at marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+
+PLATFORM_CPPFLAGS += -march=armv5te
diff --git a/cpu/arm926ejs/kirkwood/cpu.c b/cpu/arm926ejs/kirkwood/cpu.c
new file mode 100644
index 0000000..035d18f
--- /dev/null
+++ b/cpu/arm926ejs/kirkwood/cpu.c
@@ -0,0 +1,287 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <u-boot/md5.h>
+
+void reset_cpu(unsigned long ignored)
+{
+ writel(readl(KW_REG_CPU_RSTOUTN_MASK) | (1 << 2),
+ KW_REG_CPU_RSTOUTN_MASK);
+ writel(readl(KW_REG_CPU_SYS_SOFT_RST) | 1, KW_REG_CPU_SYS_SOFT_RST);
+ while (1) ;
+}
+
+/*
+ * Generates Ramdom hex number reading some time varient system registers
+ * and using md5 algorithm
+ */
+unsigned char get_random_hex(void)
+{
+ int i;
+ u32 inbuf[16];
+ u8 outbuf[16];
+
+ /*
+ * in case of 88F6281/88F6192 A0,
+ * Bit7 need to reset to generate random values in KW_REG_UNDOC_0x1470
+ * Soc reg offsets KW_REG_UNDOC_0x1470 and KW_REG_UNDOC_0x1478 are reserved regs and
+ * Does not have names at this moment (no errata available)
+ */
+ writel(readl(KW_REG_UNDOC_0x1478) | (1 << 7), KW_REG_UNDOC_0x1478);
+ for (i = 0; i < 16; i++) {
+ inbuf[i] = readl(KW_REG_UNDOC_0x1470);
+ }
+ md5((u8 *) inbuf, 64, outbuf);
+ return outbuf[outbuf[7] % 0x0f];
+}
+
+/*
+ * Window Size
+ * Used with the Base register to set the address window size and location.
+ * Must be programmed from LSB to MSB as sequence of 1’s followed by
+ * sequence of 0’s. The number of 1’s specifies the size of the window in
+ * 64 KByte granularity (e.g., a value of 0x00FF specifies 256 = 16 MByte).
+ * NOTE: A value of 0x0 specifies 64-KByte size.
+ */
+static unsigned int kw_winctrl_calcsize(unsigned int sizeval)
+{
+ int i;
+ unsigned int j = 0;
+
+ for (i = 0; i < (sizeval / 0x10000); i++) {
+ j |= (1 << i);
+ }
+ return (0x0000ffff & j);
+}
+
+/* prepares data to be loaded in win_Ctrl register */
+#define KWCPU_WIN_CTRL_DATA(size, target, attr, en) (en | (target << 4) \
+ | (attr << 8) | (kw_winctrl_calcsize(size) << 16))
+
+/*
+ * kw_config_adr_windows - Configure address Windows
+ *
+ * There are 7 address windows supported by Kirkwood Soc to addess different
+ * devices. Each window can be configured for size, BAR and remap addr
+ * Below configuration is standard for most of the cases
+ *
+ * Reference Documentation:
+ * Mbus-L to Mbus Bridge Registers Configuration.
+ * (Sec 25.1 and 25.3 of Datasheet)
+ */
+int kw_config_adr_windows(void)
+{
+ writel(KWCPU_WIN_CTRL_DATA(0xc0000, KWCPU_TARGET_PCIE,
+ KWCPU_ATTR_PCIE_MEM, KWCPU_WIN_ENABLE),
+ KW_REG_WIN_CTRL(0));
+
+ writel(0x90000000, KW_REG_WIN_BASE(0));
+ writel(0x90000000, KW_REG_WIN_REMAP_LOW(0));
+ writel(0x00000000, KW_REG_WIN_REMAP_HIGH(0));
+
+ writel(KWCPU_WIN_CTRL_DATA(0x70000, KWCPU_TARGET_MEMORY,
+ KWCPU_ATTR_NANDFLASH, KWCPU_WIN_ENABLE),
+ KW_REG_WIN_CTRL(1));
+ writel(0xF9000000, KW_REG_WIN_BASE(1));
+ writel(0xF9000000, KW_REG_WIN_REMAP_LOW(1));
+ writel(0x00000000, KW_REG_WIN_REMAP_HIGH(1));
+
+ writel(KWCPU_WIN_CTRL_DATA(0x80000, KWCPU_TARGET_PCIE,
+ KWCPU_ATTR_PCIE_IO, KWCPU_WIN_ENABLE),
+ KW_REG_WIN_CTRL(2));
+ writel(0xF0000000, KW_REG_WIN_BASE(2));
+ writel(0xC0000000, KW_REG_WIN_REMAP_LOW(2));
+ writel(0x00000000, KW_REG_WIN_REMAP_HIGH(2));
+
+ writel(KWCPU_WIN_CTRL_DATA(0x80000, KWCPU_TARGET_MEMORY,
+ KWCPU_ATTR_SPIFLASH, KWCPU_WIN_ENABLE),
+ KW_REG_WIN_CTRL(3));
+ writel(0xF8000000, KW_REG_WIN_BASE(3));
+ writel(0x00000000, KW_REG_WIN_REMAP_LOW(3));
+ writel(0x00000000, KW_REG_WIN_REMAP_HIGH(3));
+
+ writel(KWCPU_WIN_CTRL_DATA(0x80000, KWCPU_TARGET_MEMORY,
+ KWCPU_ATTR_BOOTROM, KWCPU_WIN_ENABLE),
+ KW_REG_WIN_CTRL(4));
+ writel(0xFF000000, KW_REG_WIN_BASE(4));
+ writel(0x00000000, KW_REG_WIN_REMAP_LOW(4));
+ writel(0x00000000, KW_REG_WIN_REMAP_HIGH(4));
+
+ writel(KWCPU_WIN_CTRL_DATA(0xb0000, KWCPU_TARGET_MEMORY,
+ KWCPU_ATTR_SPIFLASH, KWCPU_WIN_DISABLE),
+ KW_REG_WIN_CTRL(5));
+ writel(0xE8000000, KW_REG_WIN_BASE(5));
+ writel(0x00000000, KW_REG_WIN_REMAP_LOW(5));
+ writel(0x00000000, KW_REG_WIN_REMAP_HIGH(5));
+
+ writel(KWCPU_WIN_CTRL_DATA(0xb0000, KWCPU_TARGET_MEMORY,
+ KWCPU_ATTR_BOOTROM, KWCPU_WIN_DISABLE),
+ KW_REG_WIN_CTRL(6));
+ writel(0xF0000000, KW_REG_WIN_BASE(6));
+ writel(0x00000000, KW_REG_WIN_REMAP_LOW(6));
+ writel(0x00000000, KW_REG_WIN_REMAP_HIGH(6));
+
+ writel(KWCPU_WIN_CTRL_DATA(0x0, KWCPU_TARGET_SASRAM, KWCPU_ATTR_SASRAM,
+ KWCPU_WIN_ENABLE), KW_REG_WIN_CTRL(7));
+ writel(0xFB000000, KW_REG_WIN_BASE(7));
+ writel(0x00000000, KW_REG_WIN_REMAP_LOW(7));
+ writel(0x00000000, KW_REG_WIN_REMAP_HIGH(7));
+
+ return 0;
+}
+
+/*
+ * kw_config_gpio - GPIO configuration
+ */
+void kw_config_gpio(u32 gpp0_oe_val, u32 gpp1_oe_val, u32 gpp0_oe, u32 gpp1_oe)
+{
+ /* Init GPIOS to default values as per board requirement */
+ writel(gpp0_oe_val, KW_REG_GPP0_DATA_OUT);
+ writel(gpp1_oe_val, KW_REG_GPP1_DATA_OUT);
+ writel(gpp0_oe, KW_REG_GPP0_DATA_OUT_EN);
+ writel(gpp1_oe, KW_REG_GPP1_DATA_OUT_EN);
+}
+
+/*
+ * kw_config_mpp - Multi-Purpose Pins Functionality configuration
+ *
+ * Each MPP can be configured to different functionality through
+ * MPP control register, ref (sec 6.1 of kirkwood h/w specification)
+ *
+ * There are maximum 64 Multi-Pourpose Pins on Kirkwood
+ * Each MPP functionality can be configuration by a 4bit value
+ * of MPP control reg, the value and associated functionality depends
+ * upon used SoC varient
+ */
+int kw_config_mpp(u32 mpp0_7, u32 mpp8_15, u32 mpp16_23, u32 mpp24_31,
+ u32 mpp32_39, u32 mpp40_47, u32 mpp48_55)
+{
+ /* program mpp registers */
+ writel(mpp0_7, KW_REG_MPP_CONTROL0);
+ writel(mpp8_15, KW_REG_MPP_CONTROL1);
+ writel(mpp16_23, KW_REG_MPP_CONTROL2);
+ writel(mpp24_31, KW_REG_MPP_CONTROL3);
+ writel(mpp32_39, KW_REG_MPP_CONTROL4);
+ writel(mpp40_47, KW_REG_MPP_CONTROL5);
+ writel(mpp48_55, KW_REG_MPP_CONTROL6);
+ return 0;
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+ char *name = "Unknown";
+
+ switch (readl(KW_REG_DEVICE_ID) & 0x03) {
+ case 1:
+ name = "88F6192_A0";
+ break;
+ case 2:
+ name = "88F6281_A0";
+ break;
+ default:
+ break;
+ }
+ printf("SoC: Kirkwood %s\n", name);
+ return 0;
+}
+#endif /* CONFIG_DISPLAY_CPUINFO */
+
+#ifdef CONFIG_ARCH_CPU_INIT
+int arch_cpu_init(void)
+{
+ u32 reg;
+
+ kw_config_adr_windows();
+
+#ifdef CONFIG_KIRKWOOD_RGMII_PAD_1V8
+ /*
+ * Configures the I/O voltage of the pads connected to Egigabit
+ * Ethernet interface to 1.8V
+ * By defult it is set to 3.3V
+ */
+ reg = readl(KW_REG_MPP_OUT_DRV_REG);
+ reg |= (1 << 7);
+ writel(reg, KW_REG_MPP_OUT_DRV_REG);
+#endif
+#ifdef CONFIG_KIRKWOOD_EGIGA_INIT
+ /*
+ * Set egiga port0/1 in normal functional mode
+ * This is required becasue on kirkwood by default ports are in reset mode
+ * OS egiga driver may not have provision to set them in normal mode
+ * and if u-boot is build without network support, network may fail at OS level
+ */
+ reg = readl((KW_EGIGA0_BASE + 0x44c)); /* PORT_SERIAL_CONTROL1_REG */
+ reg &= ~(1 << 4); /* Clear PortReset Bit */
+ writel(reg, (KW_EGIGA0_BASE + 0x44c)); /* PORT_SERIAL_CONTROL1_REG */
+ reg = readl((KW_EGIGA1_BASE + 0x44c)); /* PORT_SERIAL_CONTROL1_REG */
+ reg &= ~(1 << 4); /* Clear PortReset Bit */
+ writel(reg, (KW_EGIGA1_BASE + 0x44c)); /* PORT_SERIAL_CONTROL1_REG */
+#endif
+#ifdef CONFIG_KIRKWOOD_PCIE_INIT
+ /*
+ * Enable PCI Express Port0
+ */
+ reg = readl(KW_REG_CPU_CTRL_STAT);
+ reg |= (1 << 0); /* Set PEX0En Bit */
+ writel(reg, KW_REG_CPU_CTRL_STAT);
+#endif
+ return 0;
+}
+#endif /* CONFIG_ARCH_CPU_INIT */
+
+/*
+ * SOC specific misc init
+ */
+#if defined(CONFIG_ARCH_MISC_INIT)
+int arch_misc_init(void)
+{
+ volatile u32 temp;
+
+ /*CPU streaming & write allocate */
+ temp = readfr_extra_feature_reg();
+ temp &= ~(1 << 28); /* disable wr alloc */
+ writefr_extra_feature_reg(temp);
+
+ temp = readfr_extra_feature_reg();
+ temp &= ~(1 << 29); /* streaming disabled */
+ writefr_extra_feature_reg(temp);
+
+ /* L2Cache settings */
+ temp = readfr_extra_feature_reg();
+ /* Disable L2C pre fetch - Set bit 24 */
+ temp |= (1 << 24);
+ /* enable L2C - Set bit 22 */
+ temp |= (1 << 22);
+ writefr_extra_feature_reg(temp);
+
+ icache_enable();
+ /* Change reset vector to address 0x0 */
+ temp = get_cr();
+ set_cr(temp & ~CR_V);
+
+ return 0;
+}
+#endif /* CONFIG_ARCH_MISC_INIT */
diff --git a/cpu/arm926ejs/kirkwood/cpu.h b/cpu/arm926ejs/kirkwood/cpu.h
new file mode 100644
index 0000000..6cdf8b8
--- /dev/null
+++ b/cpu/arm926ejs/kirkwood/cpu.h
@@ -0,0 +1,99 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _KWCPU_H
+#define _KWCPU_H
+
+#include <asm/system.h>
+
+#ifndef __ASSEMBLY__
+enum memory_bank {
+ BANK0,
+ BANK1,
+ BANK2,
+ BANK3
+};
+
+enum kwcpu_winen {
+ KWCPU_WIN_DISABLE,
+ KWCPU_WIN_ENABLE
+};
+
+enum kwcpu_target {
+ KWCPU_TARGET_RESERVED,
+ KWCPU_TARGET_MEMORY,
+ KWCPU_TARGET_1RESERVED,
+ KWCPU_TARGET_SASRAM,
+ KWCPU_TARGET_PCIE
+};
+
+enum kwcpu_attrib {
+ KWCPU_ATTR_SASRAM = 0x01,
+ KWCPU_ATTR_NANDFLASH = 0x2f,
+ KWCPU_ATTR_SPIFLASH = 0x1e,
+ KWCPU_ATTR_BOOTROM = 0x1d,
+ KWCPU_ATTR_PCIE_IO = 0xe0,
+ KWCPU_ATTR_PCIE_MEM = 0xe8
+};
+
+/*
+ * read feroceon/sheeva core extra feature register
+ * using co-proc instruction
+ */
+static inline unsigned int readfr_extra_feature_reg(void)
+{
+ unsigned int val;
+ asm volatile ("mrc p15, 1, %0, c15, c1, 0 @ readfr exfr":"=r"
+ (val)::"cc");
+ return val;
+}
+
+/*
+ * write feroceon/sheeva core extra feature register
+ * using co-proc instruction
+ */
+static inline void writefr_extra_feature_reg(unsigned int val)
+{
+ asm volatile ("mcr p15, 1, %0, c15, c1, 0 @ writefr exfr"::"r"
+ (val):"cc");
+ isb();
+}
+
+/*
+ * functions
+ */
+void reset_cpu(unsigned long ignored);
+unsigned char get_random_hex(void);
+unsigned int kw_sdram_bar(enum memory_bank bank);
+unsigned int kw_sdram_bs(enum memory_bank bank);
+int kw_config_adr_windows(void);
+void kw_config_gpio(unsigned int gpp0_oe_val, unsigned int gpp1_oe_val,
+ unsigned int gpp0_oe, unsigned int gpp1_oe);
+int kw_config_mpp(unsigned int mpp0_7, unsigned int mpp8_15,
+ unsigned int mpp16_23, unsigned int mpp24_31,
+ unsigned int mpp32_39, unsigned int mpp40_47,
+ unsigned int mpp48_55);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _KWCPU_H */
diff --git a/cpu/arm926ejs/kirkwood/dram.c b/cpu/arm926ejs/kirkwood/dram.c
new file mode 100644
index 0000000..9abdca2
--- /dev/null
+++ b/cpu/arm926ejs/kirkwood/dram.c
@@ -0,0 +1,57 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <config.h>
+
+#define KW_REG_CPUCS_WIN_BAR(x) (KW_REGISTER(0x1500) + (x * 0x08))
+#define KW_REG_CPUCS_WIN_SZ(x) (KW_REGISTER(0x1504) + (x * 0x08))
+/*
+ * kw_sdram_bar - reads SDRAM Base Address Register
+ */
+u32 kw_sdram_bar(enum memory_bank bank)
+{
+ u32 result = 0;
+ u32 enable = 0x01 & readl(KW_REG_CPUCS_WIN_SZ(bank));
+
+ if ((!enable) || (bank > BANK3))
+ return 0;
+
+ result = readl(KW_REG_CPUCS_WIN_BAR(bank));
+ return result;
+}
+
+/*
+ * kw_sdram_bs - reads SDRAM Bank size
+ */
+u32 kw_sdram_bs(enum memory_bank bank)
+{
+ u32 result = 0;
+ u32 enable = 0x01 & readl(KW_REG_CPUCS_WIN_SZ(bank));
+
+ if ((!enable) || (bank > BANK3))
+ return 0;
+ result = 0xff000000 & readl(KW_REG_CPUCS_WIN_SZ(bank));
+ result += 0x01000000;
+ return result;
+}
diff --git a/cpu/arm926ejs/kirkwood/lowlevel_init.S b/cpu/arm926ejs/kirkwood/lowlevel_init.S
new file mode 100644
index 0000000..d81ad05
--- /dev/null
+++ b/cpu/arm926ejs/kirkwood/lowlevel_init.S
@@ -0,0 +1,43 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <config.h>
+#include <asm/cache.h>
+
+ .globl arch_lowlevel_init
+arch_lowlevel_init:
+ /* Linux expects` the internal registers to be at 0xf1000000 */
+ ldr r1, = KW_OFFSET_REG
+ ldr r3, = KW_REGS_PHY_BASE
+ str r3,[r1]
+
+ /* Enable L2 cache in write through mode */
+ ldr r1, = KW_REG_CPU_L2_CONFIG
+ ldr r2, [r1]
+ orr r2, r2, #0x18
+ str r2, [r1]
+
+ asm_invalidate_l2_cache
+
+ mov pc, lr
diff --git a/cpu/arm926ejs/kirkwood/timer.c b/cpu/arm926ejs/kirkwood/timer.c
new file mode 100644
index 0000000..034acb9
--- /dev/null
+++ b/cpu/arm926ejs/kirkwood/timer.c
@@ -0,0 +1,159 @@
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ * Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+
+#define UBOOT_CNTR 0 /* counter to use for uboot timer */
+
+/*
+ * ARM Timers Registers Map
+ */
+#define CNTMR_CTRL_REG KW_REG_TMR_CTRL
+#define CNTMR_RELOAD_REG(tmrnum) (KW_REG_TMR_RELOAD + tmrnum*8)
+#define CNTMR_VAL_REG(tmrnum) (KW_REG_TMR_VAL + tmrnum*8)
+
+/*
+ * ARM Timers Control Register
+ * CPU_TIMERS_CTRL_REG (CTCR)
+ */
+#define TIMER0_NUM 0
+#define TIMER1_NUM 1
+#define WATCHDOG_NUM 2
+
+#define CTCR_ARM_TIMER_EN_OFFS(cntr) (cntr * 2)
+#define CTCR_ARM_TIMER_EN_MASK(cntr) (1 << CTCR_ARM_TIMER_EN_OFFS)
+#define CTCR_ARM_TIMER_EN(cntr) (1 << CTCR_ARM_TIMER_EN_OFFS(cntr))
+#define CTCR_ARM_TIMER_DIS(cntr) (0 << CTCR_ARM_TIMER_EN_OFFS(cntr))
+
+#define CTCR_ARM_TIMER_AUTO_OFFS(cntr) ((cntr * 2) + 1)
+#define CTCR_ARM_TIMER_AUTO_MASK(cntr) (1 << 1)
+#define CTCR_ARM_TIMER_AUTO_EN(cntr) (1 << CTCR_ARM_TIMER_AUTO_OFFS(cntr))
+#define CTCR_ARM_TIMER_AUTO_DIS(cntr) (0 << CTCR_ARM_TIMER_AUTO_OFFS(cntr))
+
+/*
+ * ARM Timer\Watchdog Reload Register
+ * CNTMR_RELOAD_REG (TRR)
+ */
+#define TRG_ARM_TIMER_REL_OFFS 0
+#define TRG_ARM_TIMER_REL_MASK 0xffffffff
+
+/*
+ * ARM Timer\Watchdog Register
+ * CNTMR_VAL_REG (TVRG)
+ */
+#define TVR_ARM_TIMER_OFFS 0
+#define TVR_ARM_TIMER_MASK 0xffffffff
+#define TVR_ARM_TIMER_MAX 0xffffffff
+#define TIMER_LOAD_VAL 0xffffffff
+
+#define READ_TIMER (readl(CNTMR_VAL_REG(UBOOT_CNTR)) / \
+ (CONFIG_SYS_TCLK / 1000))
+
+static ulong timestamp;
+static ulong lastdec;
+
+void reset_timer_masked(void)
+{
+ /* reset time */
+ lastdec = READ_TIMER;
+ timestamp = 0;
+}
+
+ulong get_timer_masked(void)
+{
+ ulong now = READ_TIMER;
+
+ if (lastdec >= now) {
+ /* normal mode */
+ timestamp += lastdec - now;
+ } else {
+ /* we have an overflow ... */
+ timestamp +=
+ lastdec + (TIMER_LOAD_VAL / (CONFIG_SYS_TCLK / 1000)) - now;
+ }
+ lastdec = now;
+
+ return timestamp;
+}
+
+void reset_timer(void)
+{
+ reset_timer_masked();
+}
+
+ulong get_timer(ulong base)
+{
+ return get_timer_masked() - base;
+}
+
+void set_timer(ulong t)
+{
+ timestamp = t;
+}
+
+void udelay(unsigned long usec)
+{
+ uint current;
+ ulong delayticks;
+
+ current = readl(CNTMR_VAL_REG(UBOOT_CNTR));
+ delayticks = (usec * (CONFIG_SYS_TCLK / 1000000));
+
+ if (current < delayticks) {
+ delayticks -= current;
+ while (readl(CNTMR_VAL_REG(UBOOT_CNTR)) < current) ;
+ while ((TIMER_LOAD_VAL - delayticks) <
+ readl(CNTMR_VAL_REG(UBOOT_CNTR))) ;
+ } else {
+ while (readl(CNTMR_VAL_REG(UBOOT_CNTR)) >
+ (current - delayticks)) ;
+ }
+}
+
+/*
+ * init the counter
+ */
+int timer_init(void)
+{
+ unsigned int cntmrCtrl;
+
+ /* load value onto counter\timer */
+ writel(TIMER_LOAD_VAL, CNTMR_RELOAD_REG(UBOOT_CNTR));
+ writel(TIMER_LOAD_VAL, CNTMR_VAL_REG(UBOOT_CNTR));
+
+ /* set the counter to load in the first time */
+ writel(TIMER_LOAD_VAL, CNTMR_VAL_REG(UBOOT_CNTR));
+
+ /* set control for timer \ cunter and enable */
+ /* read control register */
+ cntmrCtrl = readl(CNTMR_CTRL_REG);
+ cntmrCtrl |= CTCR_ARM_TIMER_EN(UBOOT_CNTR); /* enable cnt\timer */
+ cntmrCtrl |= CTCR_ARM_TIMER_AUTO_EN(UBOOT_CNTR); /* Auto mode */
+
+ writel(cntmrCtrl, CNTMR_CTRL_REG);
+
+ /* init the timestamp and lastdec value */
+ reset_timer_masked();
+
+ return 0;
+}
diff --git a/cpu/arm926ejs/start.S b/cpu/arm926ejs/start.S
index ed4932a..bdbb7e0 100644
--- a/cpu/arm926ejs/start.S
+++ b/cpu/arm926ejs/start.S
@@ -139,7 +139,7 @@ reset:
* we do sys-critical inits only at reboot,
* not when booting from ram!
*/
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !defined (CONFIG_SKIP_LOWLEVEL_INIT) || defined (CONFIG_ARCH_LOWLEVEL_INIT)
bl cpu_init_crit
#endif
@@ -201,7 +201,7 @@ _start_armboot:
*
*************************************************************************
*/
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+#if !defined (CONFIG_SKIP_LOWLEVEL_INIT) || defined (CONFIG_ARCH_LOWLEVEL_INIT)
cpu_init_crit:
/*
* flush v4 I/D caches
@@ -224,7 +224,12 @@ cpu_init_crit:
* Go setup Memory and board specific bits prior to relocation.
*/
mov ip, lr /* perserve link reg across call */
+#ifdef CONFIG_ARCH_LOWLEVEL_INIT
+ bl arch_lowlevel_init /* go setup arch specific init */
+#endif /* CONFIG_ARCH_LOWLEVEL_INIT */
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
bl lowlevel_init /* go setup pll,mux,memory */
+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
mov lr, ip /* restore link */
mov pc, lr /* back to my caller */
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 14c818d..9174ec6 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -28,6 +28,7 @@ LIB := $(obj)libserial.a
COBJS-$(CONFIG_ARM_DCC) += arm_dcc.o
COBJS-$(CONFIG_AT91RM9200_USART) += at91rm9200_usart.o
COBJS-$(CONFIG_ATMEL_USART) += atmel_usart.o
+COBJS-$(CONFIG_KIRKWOOD_SERIAL) += kirkwood_serial.o
COBJS-$(CONFIG_MCFUART) += mcfuart.o
COBJS-$(CONFIG_NS9750_UART) += ns9750_serial.o
COBJS-$(CONFIG_SYS_NS16550) += ns16550.o
diff --git a/drivers/serial/kirkwood_serial.c b/drivers/serial/kirkwood_serial.c
new file mode 100644
index 0000000..2f79d59
--- /dev/null
+++ b/drivers/serial/kirkwood_serial.c
@@ -0,0 +1,128 @@
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ * Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <asm/arch/serial.h>
+
+/* static variables */
+#if defined (CONFIG_CONS_INDEX) /* comes from board config */
+#if (CONFIG_CONS_INDEX == 0 )
+static volatile struct kw_uart_port *p_uart_port =
+ (void *)KW_REGISTER(KW_UART0_BASE);
+#elif (CONFIG_CONS_INDEX == 1 )
+static volatile struct kw_uart_port *p_uart_port =
+ (void *)KW_REGISTER(KW_UART1_BASE);
+#endif
+#else
+#error CONFIG_CONS_INDEX not defined correctly
+#endif
+
+#define CONFIG_KW_UART_PORTS { (void *)KW_UART0_BASE, \
+ (void *)KW_UART1_BASE }
+
+/*
+ * Serial init banner is kept simplest one
+ * if required can be created good one
+ */
+int serial_init(void)
+{
+ serial_setbrg();
+ printf
+ ("\n*************************************************************");
+ return (0);
+}
+
+static void kw_uart_putc(u8 c)
+{
+ while ((p_uart_port->lsr & LSR_THRE) == 0) ;
+ p_uart_port->thr = c;
+ return;
+}
+
+void serial_putc(const char c)
+{
+ if (c == '\n')
+ kw_uart_putc('\r');
+
+ kw_uart_putc(c);
+}
+
+int serial_getc(void)
+{
+ while ((p_uart_port->lsr & LSR_DR) == 0) ;
+ return (p_uart_port->rbr);
+}
+
+int serial_tstc(void)
+{
+ return ((p_uart_port->lsr & LSR_DR) != 0);
+}
+
+void serial_setbrg(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ int clock_divisor = (CONFIG_SYS_TCLK / 16) / gd->baudrate;
+
+ p_uart_port->ier = 0x00;
+ p_uart_port->lcr = LCR_DIVL_EN; /* Access baud rate */
+ p_uart_port->dll = clock_divisor & 0xff; /* 9600 baud */
+ p_uart_port->dlm = (clock_divisor >> 8) & 0xff;
+ p_uart_port->lcr = LCR_8N1; /* 8 data, 1 stop, no parity */
+ /* Clear & enable FIFOs */
+ p_uart_port->fcr = FCR_FIFO_EN | FCR_RXSR | FCR_TXSR;
+ return;
+}
+
+void serial_puts(const char *s)
+{
+ while (*s) {
+ serial_putc(*s++);
+ }
+}
+
+#ifdef CONFIG_CMD_KGDB
+void kgdb_serial_init(void)
+{
+}
+
+void putDebugChar(int c)
+{
+ serial_putc(c);
+}
+
+void putDebugStr(const char *str)
+{
+ serial_puts(str);
+}
+
+int getDebugChar(void)
+{
+ return serial_getc();
+}
+
+void kgdb_interruptible(int yes)
+{
+ return;
+}
+#endif /* CONFIG_CMD_KGDB */
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 1350f3e..7ffa47d 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -28,6 +28,7 @@ LIB := $(obj)libspi.a
COBJS-$(CONFIG_ATMEL_DATAFLASH_SPI) += atmel_dataflash_spi.o
COBJS-$(CONFIG_ATMEL_SPI) += atmel_spi.o
COBJS-$(CONFIG_BFIN_SPI) += bfin_spi.o
+COBJS-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o
COBJS-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o
COBJS-$(CONFIG_MXC_SPI) += mxc_spi.o
COBJS-$(CONFIG_SOFT_SPI) += soft_spi.o
diff --git a/drivers/spi/kirkwood_spi.c b/drivers/spi/kirkwood_spi.c
new file mode 100644
index 0000000..f7a70ce
--- /dev/null
+++ b/drivers/spi/kirkwood_spi.c
@@ -0,0 +1,167 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * Derived from drivers/spi/mpc8xxx_spi.c
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <spi.h>
+#include <asm/arch/spi.h>
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct spi_slave *slave;
+ u32 data;
+
+ if (!spi_cs_is_valid(bus, cs))
+ return NULL;
+
+ slave = malloc(sizeof(struct spi_slave));
+ if (!slave)
+ return NULL;
+
+ slave->bus = bus;
+ slave->cs = cs;
+
+ writel(0x00000002, KW_REG_SPI_CTRL);
+ /* program spi clock prescaller using max_hz */
+ data = ((CONFIG_SYS_TCLK / 2) / max_hz) & 0x0000000f;
+ debug("data = 0x%08x \n", data);
+ writel(0x00000210 | data, KW_REG_SPI_CONFIG);
+ writel(0x00000001, KW_REG_SPI_IRQ_CAUSE);
+ writel(0x00000000, KW_REG_SPI_IRQ_MASK);
+
+ /* program mpp registers to select SPI_CSn */
+ if (cs)
+ writel((readl(KW_REG_MPP_CONTROL0) & 0x0fffffff) |
+ 0x20000000, KW_REG_MPP_CONTROL0);
+ else
+ writel((readl(KW_REG_MPP_CONTROL0) & 0xfffffff0) |
+ 0x00000002, KW_REG_MPP_CONTROL0);
+
+ return slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ free(slave);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+}
+
+#ifndef CONFIG_SPI_CS_IS_VALID
+/*
+ * you can define this function board specific
+ * define above CONFIG in board specific config file and
+ * provide the function in board specific src file
+ */
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return (bus == 0 && (cs == 0 || cs == 1));
+}
+#endif
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ writel(readl(KW_REG_SPI_CTRL) | 1, KW_REG_SPI_CTRL);
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ writel(readl(KW_REG_SPI_CTRL) & ~1, KW_REG_SPI_CTRL);
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
+ void *din, unsigned long flags)
+{
+ unsigned int tmpdout, tmpdin;
+ int tm, isread = 0;
+
+ debug("spi_xfer: slave %u:%u dout %08X din %08X bitlen %u\n",
+ slave->bus, slave->cs, dout, din, bitlen);
+
+ if (flags & SPI_XFER_BEGIN)
+ spi_cs_activate(slave);
+
+ /*
+ * handle data in 8-bit chunks
+ * TBD: 2byte xfer mode to be enabled
+ */
+ while (bitlen > 4) {
+ debug("loopstart bitlen %d\n", bitlen);
+ tmpdout = 0;
+ /*1 byte xfer mode */
+ writel(readl(KW_REG_SPI_CONFIG) & ~(1 << 5), KW_REG_SPI_CONFIG);
+ /* Shift data so it's msb-justified */
+ if (dout)
+ tmpdout = *(u32 *) dout & 0x0ff;
+
+ writel(0x0, KW_REG_SPI_IRQ_CAUSE); /* clear bit */
+ writel(tmpdout, KW_REG_SPI_DATA_OUT); /* Write the data out */
+ debug("*** spi_xfer: ... %08x written, bitlen %d\n",
+ tmpdout, bitlen);
+
+ /*
+ * Wait for SPI transmit to get out
+ * or time out (1 second = 1000 ms)
+ * The NE event must be read and cleared first
+ */
+ for (tm = 0, isread = 0; tm < KW_SPI_TIMEOUT; ++tm) {
+ if (readl(KW_REG_SPI_IRQ_CAUSE)) {
+ isread = 1;
+ tmpdin = readl(KW_REG_SPI_DATA_IN);
+ debug
+ ("*** spi_xfer: din %08X ... %08x read\n",
+ din, tmpdin);
+
+ if (din) {
+ *((u8 *) din) = (u8) tmpdin;
+ din += 1;
+ }
+ if (dout)
+ dout += 1;
+ bitlen -= 8;
+ }
+ if (isread)
+ break;
+ }
+ if (tm >= KW_SPI_TIMEOUT)
+ printf("*** spi_xfer: Time out during SPI transfer\n");
+
+ debug("loopend bitlen %d\n", bitlen);
+ }
+
+ if (flags & SPI_XFER_END)
+ spi_cs_deactivate(slave);
+
+ return 0;
+}
diff --git a/include/asm-arm/arch-kirkwood/kirkwood.h b/include/asm-arm/arch-kirkwood/kirkwood.h
new file mode 100644
index 0000000..d06ec35
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/kirkwood.h
@@ -0,0 +1,118 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * Header file for the Marvell's Feroceon CPU core.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _ASM_ARCH_KIRKWOOD_H
+#define _ASM_ARCH_KIRKWOOD_H
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+#include <asm/io.h>
+#endif /* __ASSEMBLY__ */
+
+#if defined (CONFIG_FEROCEON_88FR131) || defined (CONFIG_SHEEVA_88SV131)
+#if defined (CONFIG_KIRKWOOD)
+#include <../cpu/arm926ejs/kirkwood/cpu.h>
+
+/* SOC specific definations */
+#define INTREG_BASE 0xd0000000
+#define KW_REGISTER(x) (KW_REGS_PHY_BASE | x)
+#define KW_OFFSET_REG (INTREG_BASE | 0x20080)
+
+/* undocumented registers */
+#define KW_REG_UNDOC_0x1470 (KW_REGISTER(0x1470))
+#define KW_REG_UNDOC_0x1478 (KW_REGISTER(0x1478))
+
+#define KW_UART0_BASE (KW_REGISTER(0x12000)) /* UArt 0 */
+#define KW_UART1_BASE (KW_REGISTER(0x13000)) /* UArt 1 */
+
+/* Controler environment registers offsets */
+#define KW_REG_MPP_CONTROL0 (KW_REGISTER(0x10000))
+#define KW_REG_MPP_CONTROL1 (KW_REGISTER(0x10004))
+#define KW_REG_MPP_CONTROL2 (KW_REGISTER(0x10008))
+#define KW_REG_MPP_CONTROL3 (KW_REGISTER(0x1000C))
+#define KW_REG_MPP_CONTROL4 (KW_REGISTER(0x10010))
+#define KW_REG_MPP_CONTROL5 (KW_REGISTER(0x10014))
+#define KW_REG_MPP_CONTROL6 (KW_REGISTER(0x10018))
+#define KW_REG_MPP_SMPL_AT_RST (KW_REGISTER(0x10030))
+#define KW_REG_DEVICE_ID (KW_REGISTER(0x10034))
+#define KW_REG_MPP_OUT_DRV_REG (KW_REGISTER(0x100E0))
+
+#define KW_REG_GPP0_DATA_OUT (KW_REGISTER(0x10100))
+#define KW_REG_GPP0_DATA_OUT_EN (KW_REGISTER(0x10104))
+#define KW_REG_GPP0_BLINK_EN (KW_REGISTER(0x10108))
+#define KW_REG_GPP0_DATA_IN_POL (KW_REGISTER(0x1010C))
+#define KW_REG_GPP0_DATA_IN (KW_REGISTER(0x10110))
+#define KW_REG_GPP0_INT_CAUSE (KW_REGISTER(0x10114))
+#define KW_REG_GPP0_INT_MASK (KW_REGISTER(0x10118))
+#define KW_REG_GPP0_INT_LVL (KW_REGISTER(0x1011c))
+
+#define KW_REG_GPP1_DATA_OUT (KW_REGISTER(0x10140))
+#define KW_REG_GPP1_DATA_OUT_EN (KW_REGISTER(0x10144))
+#define KW_REG_GPP1_BLINK_EN (KW_REGISTER(0x10148))
+#define KW_REG_GPP1_DATA_IN_POL (KW_REGISTER(0x1014C))
+#define KW_REG_GPP1_DATA_IN (KW_REGISTER(0x10150))
+#define KW_REG_GPP1_INT_CAUSE (KW_REGISTER(0x10154))
+#define KW_REG_GPP1_INT_MASK (KW_REGISTER(0x10158))
+#define KW_REG_GPP1_INT_LVL (KW_REGISTER(0x1015c))
+
+#define KW_REG_NAND_READ_PARAM (KW_REGISTER(0x10418))
+#define KW_REG_NAND_WRITE_PARAM (KW_REGISTER(0x1041c))
+#define KW_REG_NAND_CTRL (KW_REGISTER(0x10470))
+
+#define KW_REG_WIN_CTRL(x) (KW_REGISTER((0x20000 + (x * 0x10))))
+#define KW_REG_WIN_BASE(x) (KW_REGISTER((0x20004 + (x * 0x10))))
+#define KW_REG_WIN_REMAP_LOW(x) (KW_REGISTER((0x20008 + (x * 0x10))))
+#define KW_REG_WIN_REMAP_HIGH(x) (KW_REGISTER((0x2000c + (x * 0x10))))
+
+#define KW_REG_CPU_CONFIG (KW_REGISTER(0x20100))
+#define KW_REG_CPU_CTRL_STAT (KW_REGISTER(0x20104))
+#define KW_REG_CPU_RSTOUTN_MASK (KW_REGISTER(0x20108))
+#define KW_REG_CPU_SYS_SOFT_RST (KW_REGISTER(0x2010C))
+#define KW_REG_CPU_AHB_MBUS_CAUSE_INT (KW_REGISTER(0x20110))
+#define KW_REG_CPU_AHB_MBUS_MASK_INT (KW_REGISTER(0x20114))
+#define KW_REG_CPU_FTDLL_CONFIG (KW_REGISTER(0x20120))
+#define KW_REG_CPU_L2_CONFIG (KW_REGISTER(0x20128))
+#define KW_REG_L2_RAM_TIMING0 (KW_REGISTER(0x20134))
+#define KW_REG_L2_RAM_TIMING1 (KW_REGISTER(0x20138))
+
+#define KW_REG_TMR_CTRL (KW_REGISTER(0x20300))
+#define KW_REG_TMR_RELOAD (KW_REGISTER(0x20310))
+#define KW_REG_TMR_VAL (KW_REGISTER(0x20314))
+
+#define KW_REG_PCIE_BASE (KW_REGISTER(0x40000))
+
+#define KW_EGIGA0_BASE (KW_REGISTER(0x72000))
+#define KW_EGIGA1_BASE (KW_REGISTER(0x76000))
+
+#if defined (CONFIG_KW88F6281)
+#include "kw88f6281.h"
+#endif /* CONFIG_KW88F6281 */
+#if defined (CONFIG_KW88F6192)
+#include "kw88f6192.h"
+#endif /* CONFIG_KW88F6192 */
+#endif /* CONFIG_KIRKWOOD */
+#endif /* CONFIG_FEROCEON_88FR131 */
+#endif /* _ASM_ARCH_KIRKWOOD_H */
diff --git a/include/asm-arm/arch-kirkwood/kw88f6192.h b/include/asm-arm/arch-kirkwood/kw88f6192.h
new file mode 100644
index 0000000..000fc16
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/kw88f6192.h
@@ -0,0 +1,37 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * Header file for Feroceon CPU core 88FR131 Based KW88F6192 SOC.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _CONFIG_KW88F6192_H
+#define _CONFIG_KW88F6192_H
+
+/* SOC specific definations */
+#define KW88F6192_REGS_PHYS_BASE 0xf1000000
+#define KW_REGS_PHY_BASE KW88F6192_REGS_PHYS_BASE
+
+/* TCLK Core Clock defination */
+#define CONFIG_SYS_TCLK 166000000 /* 166MHz */
+
+#endif /* _CONFIG_KW88F6192_H */
diff --git a/include/asm-arm/arch-kirkwood/kw88f6281.h b/include/asm-arm/arch-kirkwood/kw88f6281.h
new file mode 100644
index 0000000..270d931
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/kw88f6281.h
@@ -0,0 +1,37 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * Header file for Feroceon CPU core 88FR131 Based KW88F6281 SOC.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _ASM_ARCH_KW88F6281_H
+#define _ASM_ARCH_KW88F6281_H
+
+/* SOC specific definations */
+#define KW88F6281_REGS_PHYS_BASE 0xf1000000
+#define KW_REGS_PHY_BASE KW88F6281_REGS_PHYS_BASE
+
+/* TCLK Core Clock defination*/
+#define CONFIG_SYS_TCLK 200000000 /* 200MHz */
+
+#endif /* _ASM_ARCH_KW88F6281_H */
diff --git a/include/asm-arm/arch-kirkwood/serial.h b/include/asm-arm/arch-kirkwood/serial.h
new file mode 100644
index 0000000..5fd3b31
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/serial.h
@@ -0,0 +1,89 @@
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ * Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef __KW_SERIAL_H__
+#define __KW_SERIAL_H__
+
+/* registers feilds */
+#define FCR_FIFO_EN (1 << 0) /* fifo enable */
+#define FCR_RXSR (1 << 1) /* receiver soft reset */
+#define FCR_TXSR (1 << 2) /* transmitter soft reset */
+#define MCR_RTS (1 << 1) /* ready to send */
+
+#define LCR_WLS_OFFS 0
+#define LCR_WLS_MASK (0x3 << LCR_WLS_OFFS) /* character length mask */
+#define LCR_WLS_5 (0x0 << LCR_WLS_OFFS) /* 5 bit character length */
+#define LCR_WLS_6 (0x1 << LCR_WLS_OFFS) /* 6 bit character length */
+#define LCR_WLS_7 (0x2 << LCR_WLS_OFFS) /* 7 bit character length */
+#define LCR_WLS_8 (0x3 << LCR_WLS_OFFS) /* 8 bit character length */
+#define LCR_STP_OFFS 2
+#define LCR_1_STB (0x0 << LCR_STP_OFFS) /* Number of stop Bits */
+#define LCR_2_STB (0x1 << LCR_STP_OFFS) /* Number of stop Bits */
+#define LCR_PEN 0x8 /* Parity enable */
+#define LCR_PS_OFFS 4
+#define LCR_EPS (0x1 << LCR_PS_OFFS) /* Even Parity Select */
+#define LCR_OPS (0x0 << LCR_PS_OFFS) /* Odd Parity Select */
+#define LCR_SBRK_OFFS 0x6
+#define LCR_SBRK (0x1 << LCR_SBRK_OFFS) /* Set Break */
+#define LCR_DIVL_OFFS 7
+#define LCR_DIVL_EN (0x1 << LCR_DIVL_OFFS) /* Divisior latch enable */
+
+#define LSR_DR (1 << 0) /* Data ready */
+#define LSR_OE (1 << 1) /* Overrun */
+#define LSR_PE (1 << 2) /* Parity error */
+#define LSR_FE (1 << 3) /* Framing error */
+#define LSR_BI (1 << 4) /* Break */
+#define LSR_THRE (1 << 5) /* Xmit holding register empty */
+#define LSR_TEMT (1 << 6) /* Xmitter empty */
+#define LSR_ERR (1 << 7) /* Error */
+
+/* useful defaults for LCR*/
+#define LCR_8N1 LCR_WLS_8 | LCR_1_STB
+
+/* This structure describes the registers offsets for one UART port/channel */
+struct kw_uart_port {
+ u8 rbr; /* 0 = 0-3 */
+ u8 pad1[3];
+ u8 ier; /* 1 = 4-7 */
+ u8 pad2[3];
+ u8 fcr; /* 2 = 8-b */
+ u8 pad3[3];
+ u8 lcr; /* 3 = c-f */
+ u8 pad4[3];
+ u8 mcr; /* 4 = 10-13 */
+ u8 pad5[3];
+ u8 lsr; /* 5 = 14-17 */
+ u8 pad6[3];
+ u8 msr; /* 6 =18-1b */
+ u8 pad7[3];
+ u8 scr; /* 7 =1c-1f */
+ u8 pad8[3];
+};
+
+/* aliases - for registers which has the same offsets */
+#define thr rbr
+#define iir fcr
+#define dll rbr
+#define dlm ier
+
+#endif /* __KW_SERIAL_H__ */
diff --git a/include/asm-arm/arch-kirkwood/spi.h b/include/asm-arm/arch-kirkwood/spi.h
new file mode 100644
index 0000000..0fd9131
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/spi.h
@@ -0,0 +1,39 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * Derived from drivers/spi/mpc8xxx_spi.c
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef __KW_SPI_H__
+#define __KW_SPI_H__
+
+/* SPI Registers on kirkwood SOC */
+#define KW_REG_SPI_CTRL KW_REGISTER(0x10600)
+#define KW_REG_SPI_CONFIG KW_REGISTER(0x10604)
+#define KW_REG_SPI_DATA_OUT KW_REGISTER(0x10608)
+#define KW_REG_SPI_DATA_IN KW_REGISTER(0x1060c)
+#define KW_REG_SPI_IRQ_CAUSE KW_REGISTER(0x10610)
+#define KW_REG_SPI_IRQ_MASK KW_REGISTER(0x10614)
+
+#define KW_SPI_TIMEOUT 10000
+#endif __KW_SPI_H__
diff --git a/include/asm-arm/cache.h b/include/asm-arm/cache.h
new file mode 100644
index 0000000..07eef4c
--- /dev/null
+++ b/include/asm-arm/cache.h
@@ -0,0 +1,49 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _ASM_CACHE_H
+#define _ASM_CACHE_H
+
+#ifndef __ASSEMBLY__
+#include <asm/system.h>
+
+/*
+ * Invalidate L2 Cache using co-proc instruction
+ */
+static inline void invalidate_l2_cache(void)
+{
+ unsigned int val=0;
+
+ asm volatile("mcr p15, 1, %0, c15, c11, 0 @ invl l2 cache"
+ : : "r" (val) : "cc");
+ isb();
+}
+#else
+.macro asm_invalidate_l2_cache
+ mov r0, #0
+ mcr p15, 1, r0, c15, c11, 0
+.endm
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_CACHE_H */
diff --git a/include/asm-arm/config.h b/include/asm-arm/config.h
index 049c44e..5d52f15 100644
--- a/include/asm-arm/config.h
+++ b/include/asm-arm/config.h
@@ -21,4 +21,8 @@
#ifndef _ASM_CONFIG_H_
#define _ASM_CONFIG_H_
+#if defined (CONFIG_KIRKWOOD)
+#include <asm-arm/arch-kirkwood/kirkwood.h>
+#endif /* CONFIG_KIRKWOOD */
+
#endif
diff --git a/include/common.h b/include/common.h
index 30fff7d..9e4b859 100644
--- a/include/common.h
+++ b/include/common.h
@@ -294,6 +294,7 @@ void pciinfo (int, int);
#endif
#endif
+int arch_misc_init (void);
int misc_init_f (void);
int misc_init_r (void);
diff --git a/lib_arm/board.c b/lib_arm/board.c
index 5d05d9b..b8db60d 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -393,6 +393,10 @@ void start_armboot (void)
console_init_r (); /* fully init console as a device */
+#if defined(CONFIG_ARCH_MISC_INIT)
+ /* miscellaneous arch dependent initialisations */
+ arch_misc_init ();
+#endif
#if defined(CONFIG_MISC_INIT_R)
/* miscellaneous platform dependent initialisations */
misc_init_r ();
--
1.5.3.4
More information about the U-Boot
mailing list