[U-Boot] [PATCH] at91: regroup IP hw init in one cpu file per soc
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Wed May 13 23:12:01 CEST 2009
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
cpu/arm926ejs/at91/Makefile | 35 +---
cpu/arm926ejs/at91/at91cap9_devices.c | 176 +++++++++++++++++++
cpu/arm926ejs/at91/at91cap9_macb.c | 54 ------
cpu/arm926ejs/at91/at91cap9_serial.c | 76 --------
cpu/arm926ejs/at91/at91cap9_spi.c | 100 -----------
cpu/arm926ejs/at91/at91sam9260_devices.c | 184 ++++++++++++++++++++
cpu/arm926ejs/at91/at91sam9260_macb.c | 63 -------
cpu/arm926ejs/at91/at91sam9260_serial.c | 76 --------
cpu/arm926ejs/at91/at91sam9260_spi.c | 99 -----------
.../{at91sam9261_spi.c => at91sam9261_devices.c} | 49 +++++
cpu/arm926ejs/at91/at91sam9261_serial.c | 76 --------
cpu/arm926ejs/at91/at91sam9263_devices.c | 184 ++++++++++++++++++++
cpu/arm926ejs/at91/at91sam9263_macb.c | 54 ------
cpu/arm926ejs/at91/at91sam9263_serial.c | 76 --------
cpu/arm926ejs/at91/at91sam9263_spi.c | 99 -----------
cpu/arm926ejs/at91/at91sam9263_usb.c | 35 ----
.../{at91sam9rl_serial.c => at91sam9rl_devices.c} | 37 ++++
cpu/arm926ejs/at91/at91sam9rl_spi.c | 64 -------
18 files changed, 636 insertions(+), 901 deletions(-)
create mode 100644 cpu/arm926ejs/at91/at91cap9_devices.c
delete mode 100644 cpu/arm926ejs/at91/at91cap9_macb.c
delete mode 100644 cpu/arm926ejs/at91/at91cap9_serial.c
delete mode 100644 cpu/arm926ejs/at91/at91cap9_spi.c
create mode 100644 cpu/arm926ejs/at91/at91sam9260_devices.c
delete mode 100644 cpu/arm926ejs/at91/at91sam9260_macb.c
delete mode 100644 cpu/arm926ejs/at91/at91sam9260_serial.c
delete mode 100644 cpu/arm926ejs/at91/at91sam9260_spi.c
rename cpu/arm926ejs/at91/{at91sam9261_spi.c => at91sam9261_devices.c} (72%)
delete mode 100644 cpu/arm926ejs/at91/at91sam9261_serial.c
create mode 100644 cpu/arm926ejs/at91/at91sam9263_devices.c
delete mode 100644 cpu/arm926ejs/at91/at91sam9263_macb.c
delete mode 100644 cpu/arm926ejs/at91/at91sam9263_serial.c
delete mode 100644 cpu/arm926ejs/at91/at91sam9263_spi.c
delete mode 100644 cpu/arm926ejs/at91/at91sam9263_usb.c
rename cpu/arm926ejs/at91/{at91sam9rl_serial.c => at91sam9rl_devices.c} (70%)
delete mode 100644 cpu/arm926ejs/at91/at91sam9rl_spi.c
diff --git a/cpu/arm926ejs/at91/Makefile b/cpu/arm926ejs/at91/Makefile
index e300d97..71acb0b 100644
--- a/cpu/arm926ejs/at91/Makefile
+++ b/cpu/arm926ejs/at91/Makefile
@@ -25,35 +25,12 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).a
-ifdef CONFIG_AT91CAP9
-COBJS-$(CONFIG_MACB) += at91cap9_macb.o
-COBJS-y += at91cap9_serial.o
-COBJS-$(CONFIG_HAS_DATAFLASH) += at91cap9_spi.o
-endif
-ifdef CONFIG_AT91SAM9260
-COBJS-$(CONFIG_MACB) += at91sam9260_macb.o
-COBJS-y += at91sam9260_serial.o
-COBJS-$(CONFIG_HAS_DATAFLASH) += at91sam9260_spi.o
-endif
-ifdef CONFIG_AT91SAM9G20
-COBJS-$(CONFIG_MACB) += at91sam9260_macb.o
-COBJS-y += at91sam9260_serial.o
-COBJS-$(CONFIG_HAS_DATAFLASH) += at91sam9260_spi.o
-endif
-ifdef CONFIG_AT91SAM9261
-COBJS-y += at91sam9261_serial.o
-COBJS-$(CONFIG_HAS_DATAFLASH) += at91sam9261_spi.o
-endif
-ifdef CONFIG_AT91SAM9263
-COBJS-$(CONFIG_MACB) += at91sam9263_macb.o
-COBJS-y += at91sam9263_serial.o
-COBJS-$(CONFIG_HAS_DATAFLASH) += at91sam9263_spi.o
-COBJS-$(CONFIG_USB_OHCI_NEW) += at91sam9263_usb.o
-endif
-ifdef CONFIG_AT91SAM9RL
-COBJS-y += at91sam9rl_serial.o
-COBJS-$(CONFIG_HAS_DATAFLASH) += at91sam9rl_spi.o
-endif
+COBJS-$(CONFIG_AT91CAP9) += at91cap9_devices.o
+COBJS-$(CONFIG_AT91SAM9260) += at91sam9260_devices.o
+COBJS-$(CONFIG_AT91SAM9G20) += at91sam9260_devices.o
+COBJS-$(CONFIG_AT91SAM9261) += at91sam9261_devices.o
+COBJS-$(CONFIG_AT91SAM9263) += at91sam9263_devices.o
+COBJS-$(CONFIG_AT91SAM9RL) += at91sam9rl_devices.o
COBJS-$(CONFIG_AT91_LED) += led.o
COBJS-y += clock.o
COBJS-y += cpu.o
diff --git a/cpu/arm926ejs/at91/at91cap9_devices.c b/cpu/arm926ejs/at91/at91cap9_devices.c
new file mode 100644
index 0000000..c0024ac
--- /dev/null
+++ b/cpu/arm926ejs/at91/at91cap9_devices.c
@@ -0,0 +1,176 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop at leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+void at91_serial0_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US0);
+}
+
+void at91_serial1_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US1);
+}
+
+void at91_serial2_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US2);
+}
+
+void at91_serial3_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+}
+
+void at91_serial_hw_init(void)
+{
+#ifdef CONFIG_USART0
+ at91_serial0_hw_init();
+#endif
+
+#ifdef CONFIG_USART1
+ at91_serial1_hw_init();
+#endif
+
+#ifdef CONFIG_USART2
+ at91_serial2_hw_init();
+#endif
+
+#ifdef CONFIG_USART3 /* DBGU */
+ at91_serial3_hw_init();
+#endif
+}
+
+#ifdef CONFIG_HAS_DATAFLASH
+void at91_spi0_hw_init(unsigned long cs_mask)
+{
+ at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
+ at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
+ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
+
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_SPI0);
+
+ if (cs_mask & (1 << 0)) {
+ at91_set_B_periph(AT91_PIN_PA5, 1);
+ }
+ if (cs_mask & (1 << 1)) {
+ at91_set_B_periph(AT91_PIN_PA3, 1);
+ }
+ if (cs_mask & (1 << 2)) {
+ at91_set_B_periph(AT91_PIN_PD0, 1);
+ }
+ if (cs_mask & (1 << 3)) {
+ at91_set_B_periph(AT91_PIN_PD1, 1);
+ }
+ if (cs_mask & (1 << 4)) {
+ at91_set_gpio_output(AT91_PIN_PA5, 1);
+ }
+ if (cs_mask & (1 << 5)) {
+ at91_set_gpio_output(AT91_PIN_PA3, 1);
+ }
+ if (cs_mask & (1 << 6)) {
+ at91_set_gpio_output(AT91_PIN_PD0, 1);
+ }
+ if (cs_mask & (1 << 7)) {
+ at91_set_gpio_output(AT91_PIN_PD1, 1);
+ }
+}
+
+void at91_spi1_hw_init(unsigned long cs_mask)
+{
+ at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */
+ at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
+ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
+
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_SPI1);
+
+ if (cs_mask & (1 << 0)) {
+ at91_set_A_periph(AT91_PIN_PB15, 1);
+ }
+ if (cs_mask & (1 << 1)) {
+ at91_set_A_periph(AT91_PIN_PB16, 1);
+ }
+ if (cs_mask & (1 << 2)) {
+ at91_set_A_periph(AT91_PIN_PB17, 1);
+ }
+ if (cs_mask & (1 << 3)) {
+ at91_set_A_periph(AT91_PIN_PB18, 1);
+ }
+ if (cs_mask & (1 << 4)) {
+ at91_set_gpio_output(AT91_PIN_PB15, 1);
+ }
+ if (cs_mask & (1 << 5)) {
+ at91_set_gpio_output(AT91_PIN_PB16, 1);
+ }
+ if (cs_mask & (1 << 6)) {
+ at91_set_gpio_output(AT91_PIN_PB17, 1);
+ }
+ if (cs_mask & (1 << 7)) {
+ at91_set_gpio_output(AT91_PIN_PB18, 1);
+ }
+
+}
+#endif
+
+#ifdef CONFIG_MACB
+void at91_macb_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PB21, 0); /* ETXCK_EREFCK */
+ at91_set_A_periph(AT91_PIN_PB22, 0); /* ERXDV */
+ at91_set_A_periph(AT91_PIN_PB25, 0); /* ERX0 */
+ at91_set_A_periph(AT91_PIN_PB26, 0); /* ERX1 */
+ at91_set_A_periph(AT91_PIN_PB27, 0); /* ERXER */
+ at91_set_A_periph(AT91_PIN_PB28, 0); /* ETXEN */
+ at91_set_A_periph(AT91_PIN_PB23, 0); /* ETX0 */
+ at91_set_A_periph(AT91_PIN_PB24, 0); /* ETX1 */
+ at91_set_A_periph(AT91_PIN_PB30, 0); /* EMDIO */
+ at91_set_A_periph(AT91_PIN_PB29, 0); /* EMDC */
+
+#ifndef CONFIG_RMII
+ at91_set_B_periph(AT91_PIN_PC25, 0); /* ECRS */
+ at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
+ at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
+ at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
+ at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
+ at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
+ at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
+ at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
+#endif
+}
+#endif
diff --git a/cpu/arm926ejs/at91/at91cap9_macb.c b/cpu/arm926ejs/at91/at91cap9_macb.c
deleted file mode 100644
index 5095d8d..0000000
--- a/cpu/arm926ejs/at91/at91cap9_macb.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop at leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-
-void at91_macb_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PB21, 0); /* ETXCK_EREFCK */
- at91_set_A_periph(AT91_PIN_PB22, 0); /* ERXDV */
- at91_set_A_periph(AT91_PIN_PB25, 0); /* ERX0 */
- at91_set_A_periph(AT91_PIN_PB26, 0); /* ERX1 */
- at91_set_A_periph(AT91_PIN_PB27, 0); /* ERXER */
- at91_set_A_periph(AT91_PIN_PB28, 0); /* ETXEN */
- at91_set_A_periph(AT91_PIN_PB23, 0); /* ETX0 */
- at91_set_A_periph(AT91_PIN_PB24, 0); /* ETX1 */
- at91_set_A_periph(AT91_PIN_PB30, 0); /* EMDIO */
- at91_set_A_periph(AT91_PIN_PB29, 0); /* EMDC */
-
-#ifndef CONFIG_RMII
- at91_set_B_periph(AT91_PIN_PC25, 0); /* ECRS */
- at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
- at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
- at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
- at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
- at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
- at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
- at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
-#endif
-}
diff --git a/cpu/arm926ejs/at91/at91cap9_serial.c b/cpu/arm926ejs/at91/at91cap9_serial.c
deleted file mode 100644
index 5f41f7e..0000000
--- a/cpu/arm926ejs/at91/at91cap9_serial.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop at leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-
-void at91_serial0_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US0);
-}
-
-void at91_serial1_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US1);
-}
-
-void at91_serial2_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US2);
-}
-
-void at91_serial3_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
-}
-
-void at91_serial_hw_init(void)
-{
-#ifdef CONFIG_USART0
- at91_serial0_hw_init();
-#endif
-
-#ifdef CONFIG_USART1
- at91_serial1_hw_init();
-#endif
-
-#ifdef CONFIG_USART2
- at91_serial2_hw_init();
-#endif
-
-#ifdef CONFIG_USART3 /* DBGU */
- at91_serial3_hw_init();
-#endif
-}
diff --git a/cpu/arm926ejs/at91/at91cap9_spi.c b/cpu/arm926ejs/at91/at91cap9_spi.c
deleted file mode 100644
index cd8143b..0000000
--- a/cpu/arm926ejs/at91/at91cap9_spi.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop at leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-
-void at91_spi0_hw_init(unsigned long cs_mask)
-{
- at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
- at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
- at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
-
- /* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_SPI0);
-
- if (cs_mask & (1 << 0)) {
- at91_set_B_periph(AT91_PIN_PA5, 1);
- }
- if (cs_mask & (1 << 1)) {
- at91_set_B_periph(AT91_PIN_PA3, 1);
- }
- if (cs_mask & (1 << 2)) {
- at91_set_B_periph(AT91_PIN_PD0, 1);
- }
- if (cs_mask & (1 << 3)) {
- at91_set_B_periph(AT91_PIN_PD1, 1);
- }
- if (cs_mask & (1 << 4)) {
- at91_set_gpio_output(AT91_PIN_PA5, 1);
- }
- if (cs_mask & (1 << 5)) {
- at91_set_gpio_output(AT91_PIN_PA3, 1);
- }
- if (cs_mask & (1 << 6)) {
- at91_set_gpio_output(AT91_PIN_PD0, 1);
- }
- if (cs_mask & (1 << 7)) {
- at91_set_gpio_output(AT91_PIN_PD1, 1);
- }
-}
-
-void at91_spi1_hw_init(unsigned long cs_mask)
-{
- at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */
- at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
- at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
-
- /* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_SPI1);
-
- if (cs_mask & (1 << 0)) {
- at91_set_A_periph(AT91_PIN_PB15, 1);
- }
- if (cs_mask & (1 << 1)) {
- at91_set_A_periph(AT91_PIN_PB16, 1);
- }
- if (cs_mask & (1 << 2)) {
- at91_set_A_periph(AT91_PIN_PB17, 1);
- }
- if (cs_mask & (1 << 3)) {
- at91_set_A_periph(AT91_PIN_PB18, 1);
- }
- if (cs_mask & (1 << 4)) {
- at91_set_gpio_output(AT91_PIN_PB15, 1);
- }
- if (cs_mask & (1 << 5)) {
- at91_set_gpio_output(AT91_PIN_PB16, 1);
- }
- if (cs_mask & (1 << 6)) {
- at91_set_gpio_output(AT91_PIN_PB17, 1);
- }
- if (cs_mask & (1 << 7)) {
- at91_set_gpio_output(AT91_PIN_PB18, 1);
- }
-
-}
diff --git a/cpu/arm926ejs/at91/at91sam9260_devices.c b/cpu/arm926ejs/at91/at91sam9260_devices.c
new file mode 100644
index 0000000..6dc0acc
--- /dev/null
+++ b/cpu/arm926ejs/at91/at91sam9260_devices.c
@@ -0,0 +1,184 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop at leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+void at91_serial0_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US0);
+}
+
+void at91_serial1_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US1);
+}
+
+void at91_serial2_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US2);
+}
+
+void at91_serial3_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+}
+
+void at91_serial_hw_init(void)
+{
+#ifdef CONFIG_USART0
+ at91_serial0_hw_init();
+#endif
+
+#ifdef CONFIG_USART1
+ at91_serial1_hw_init();
+#endif
+
+#ifdef CONFIG_USART2
+ at91_serial2_hw_init();
+#endif
+
+#ifdef CONFIG_USART3 /* DBGU */
+ at91_serial3_hw_init();
+#endif
+}
+
+#ifdef CONFIG_HAS_DATAFLASH
+void at91_spi0_hw_init(unsigned long cs_mask)
+{
+ at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
+ at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
+ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
+
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_SPI0);
+
+ if (cs_mask & (1 << 0)) {
+ at91_set_A_periph(AT91_PIN_PA3, 1);
+ }
+ if (cs_mask & (1 << 1)) {
+ at91_set_B_periph(AT91_PIN_PC11, 1);
+ }
+ if (cs_mask & (1 << 2)) {
+ at91_set_B_periph(AT91_PIN_PC16, 1);
+ }
+ if (cs_mask & (1 << 3)) {
+ at91_set_B_periph(AT91_PIN_PC17, 1);
+ }
+ if (cs_mask & (1 << 4)) {
+ at91_set_gpio_output(AT91_PIN_PA3, 1);
+ }
+ if (cs_mask & (1 << 5)) {
+ at91_set_gpio_output(AT91_PIN_PC11, 1);
+ }
+ if (cs_mask & (1 << 6)) {
+ at91_set_gpio_output(AT91_PIN_PC16, 1);
+ }
+ if (cs_mask & (1 << 7)) {
+ at91_set_gpio_output(AT91_PIN_PC17, 1);
+ }
+}
+
+void at91_spi1_hw_init(unsigned long cs_mask)
+{
+ at91_set_A_periph(AT91_PIN_PB0, 0); /* SPI1_MISO */
+ at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI1_MOSI */
+ at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI1_SPCK */
+
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_SPI1);
+
+ if (cs_mask & (1 << 0)) {
+ at91_set_A_periph(AT91_PIN_PB3, 1);
+ }
+ if (cs_mask & (1 << 1)) {
+ at91_set_B_periph(AT91_PIN_PC5, 1);
+ }
+ if (cs_mask & (1 << 2)) {
+ at91_set_B_periph(AT91_PIN_PC4, 1);
+ }
+ if (cs_mask & (1 << 3)) {
+ at91_set_gpio_output(AT91_PIN_PC3, 1);
+ }
+ if (cs_mask & (1 << 4)) {
+ at91_set_gpio_output(AT91_PIN_PB3, 1);
+ }
+ if (cs_mask & (1 << 5)) {
+ at91_set_gpio_output(AT91_PIN_PC5, 1);
+ }
+ if (cs_mask & (1 << 6)) {
+ at91_set_gpio_output(AT91_PIN_PC4, 1);
+ }
+ if (cs_mask & (1 << 7)) {
+ at91_set_gpio_output(AT91_PIN_PC3, 1);
+ }
+}
+#endif
+
+#ifdef CONFIG_MACB
+void at91_macb_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */
+ at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */
+ at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */
+ at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */
+ at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */
+ at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */
+ at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */
+ at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */
+ at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */
+ at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */
+
+#ifndef CONFIG_RMII
+ at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */
+ at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */
+ at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */
+ at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */
+ at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */
+#if defined(CONFIG_AT91SAM9260EK)
+ /*
+ * use PA10, PA11 for ETX2, ETX3.
+ * PA23 and PA24 are for TWI EEPROM
+ */
+ at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */
+ at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */
+#else
+ at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */
+ at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */
+#endif
+ at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */
+#endif
+}
+#endif
diff --git a/cpu/arm926ejs/at91/at91sam9260_macb.c b/cpu/arm926ejs/at91/at91sam9260_macb.c
deleted file mode 100644
index ab60fb7..0000000
--- a/cpu/arm926ejs/at91/at91sam9260_macb.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop at leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-
-void at91_macb_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */
- at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */
- at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */
- at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */
- at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */
- at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */
- at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */
- at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */
- at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */
- at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */
-
-#ifndef CONFIG_RMII
- at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */
- at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */
- at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */
- at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */
- at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */
-#if defined(CONFIG_AT91SAM9260EK)
- /*
- * use PA10, PA11 for ETX2, ETX3.
- * PA23 and PA24 are for TWI EEPROM
- */
- at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */
- at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */
-#else
- at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */
- at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */
-#endif
- at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */
-#endif
-}
diff --git a/cpu/arm926ejs/at91/at91sam9260_serial.c b/cpu/arm926ejs/at91/at91sam9260_serial.c
deleted file mode 100644
index 43f1971..0000000
--- a/cpu/arm926ejs/at91/at91sam9260_serial.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop at leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-
-void at91_serial0_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US0);
-}
-
-void at91_serial1_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US1);
-}
-
-void at91_serial2_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US2);
-}
-
-void at91_serial3_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
-}
-
-void at91_serial_hw_init(void)
-{
-#ifdef CONFIG_USART0
- at91_serial0_hw_init();
-#endif
-
-#ifdef CONFIG_USART1
- at91_serial1_hw_init();
-#endif
-
-#ifdef CONFIG_USART2
- at91_serial2_hw_init();
-#endif
-
-#ifdef CONFIG_USART3 /* DBGU */
- at91_serial3_hw_init();
-#endif
-}
diff --git a/cpu/arm926ejs/at91/at91sam9260_spi.c b/cpu/arm926ejs/at91/at91sam9260_spi.c
deleted file mode 100644
index d6fd80e..0000000
--- a/cpu/arm926ejs/at91/at91sam9260_spi.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop at leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-
-void at91_spi0_hw_init(unsigned long cs_mask)
-{
- at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
- at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
- at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
-
- /* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_SPI0);
-
- if (cs_mask & (1 << 0)) {
- at91_set_A_periph(AT91_PIN_PA3, 1);
- }
- if (cs_mask & (1 << 1)) {
- at91_set_B_periph(AT91_PIN_PC11, 1);
- }
- if (cs_mask & (1 << 2)) {
- at91_set_B_periph(AT91_PIN_PC16, 1);
- }
- if (cs_mask & (1 << 3)) {
- at91_set_B_periph(AT91_PIN_PC17, 1);
- }
- if (cs_mask & (1 << 4)) {
- at91_set_gpio_output(AT91_PIN_PA3, 1);
- }
- if (cs_mask & (1 << 5)) {
- at91_set_gpio_output(AT91_PIN_PC11, 1);
- }
- if (cs_mask & (1 << 6)) {
- at91_set_gpio_output(AT91_PIN_PC16, 1);
- }
- if (cs_mask & (1 << 7)) {
- at91_set_gpio_output(AT91_PIN_PC17, 1);
- }
-}
-
-void at91_spi1_hw_init(unsigned long cs_mask)
-{
- at91_set_A_periph(AT91_PIN_PB0, 0); /* SPI1_MISO */
- at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI1_MOSI */
- at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI1_SPCK */
-
- /* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_SPI1);
-
- if (cs_mask & (1 << 0)) {
- at91_set_A_periph(AT91_PIN_PB3, 1);
- }
- if (cs_mask & (1 << 1)) {
- at91_set_B_periph(AT91_PIN_PC5, 1);
- }
- if (cs_mask & (1 << 2)) {
- at91_set_B_periph(AT91_PIN_PC4, 1);
- }
- if (cs_mask & (1 << 3)) {
- at91_set_gpio_output(AT91_PIN_PC3, 1);
- }
- if (cs_mask & (1 << 4)) {
- at91_set_gpio_output(AT91_PIN_PB3, 1);
- }
- if (cs_mask & (1 << 5)) {
- at91_set_gpio_output(AT91_PIN_PC5, 1);
- }
- if (cs_mask & (1 << 6)) {
- at91_set_gpio_output(AT91_PIN_PC4, 1);
- }
- if (cs_mask & (1 << 7)) {
- at91_set_gpio_output(AT91_PIN_PC3, 1);
- }
-}
diff --git a/cpu/arm926ejs/at91/at91sam9261_spi.c b/cpu/arm926ejs/at91/at91sam9261_devices.c
similarity index 72%
rename from cpu/arm926ejs/at91/at91sam9261_spi.c
rename to cpu/arm926ejs/at91/at91sam9261_devices.c
index 9383dc6..16d411f 100644
--- a/cpu/arm926ejs/at91/at91sam9261_spi.c
+++ b/cpu/arm926ejs/at91/at91sam9261_devices.c
@@ -28,6 +28,54 @@
#include <asm/arch/gpio.h>
#include <asm/arch/io.h>
+void at91_serial0_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US0);
+}
+
+void at91_serial1_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US1);
+}
+
+void at91_serial2_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US2);
+}
+
+void at91_serial3_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PA9, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PA10, 1); /* DTXD */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+}
+
+void at91_serial_hw_init(void)
+{
+#ifdef CONFIG_USART0
+ at91_serial0_hw_init();
+#endif
+
+#ifdef CONFIG_USART1
+ at91_serial1_hw_init();
+#endif
+
+#ifdef CONFIG_USART2
+ at91_serial2_hw_init();
+#endif
+
+#ifdef CONFIG_USART3 /* DBGU */
+ at91_serial3_hw_init();
+#endif
+}
+
+#ifdef CONFIG_HAS_DATAFLASH
void at91_spi0_hw_init(unsigned long cs_mask)
{
at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
@@ -97,3 +145,4 @@ void at91_spi1_hw_init(unsigned long cs_mask)
at91_set_gpio_output(AT91_PIN_PA26, 1);
}
}
+#endif
diff --git a/cpu/arm926ejs/at91/at91sam9261_serial.c b/cpu/arm926ejs/at91/at91sam9261_serial.c
deleted file mode 100644
index c262a92..0000000
--- a/cpu/arm926ejs/at91/at91sam9261_serial.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop at leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-
-void at91_serial0_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US0);
-}
-
-void at91_serial1_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US1);
-}
-
-void at91_serial2_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US2);
-}
-
-void at91_serial3_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PA9, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PA10, 1); /* DTXD */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
-}
-
-void at91_serial_hw_init(void)
-{
-#ifdef CONFIG_USART0
- at91_serial0_hw_init();
-#endif
-
-#ifdef CONFIG_USART1
- at91_serial1_hw_init();
-#endif
-
-#ifdef CONFIG_USART2
- at91_serial2_hw_init();
-#endif
-
-#ifdef CONFIG_USART3 /* DBGU */
- at91_serial3_hw_init();
-#endif
-}
diff --git a/cpu/arm926ejs/at91/at91sam9263_devices.c b/cpu/arm926ejs/at91/at91sam9263_devices.c
new file mode 100644
index 0000000..0f2613e
--- /dev/null
+++ b/cpu/arm926ejs/at91/at91sam9263_devices.c
@@ -0,0 +1,184 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop at leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+void at91_serial0_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US0);
+}
+
+void at91_serial1_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US1);
+}
+
+void at91_serial2_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US2);
+}
+
+void at91_serial3_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+}
+
+void at91_serial_hw_init(void)
+{
+#ifdef CONFIG_USART0
+ at91_serial0_hw_init();
+#endif
+
+#ifdef CONFIG_USART1
+ at91_serial1_hw_init();
+#endif
+
+#ifdef CONFIG_USART2
+ at91_serial2_hw_init();
+#endif
+
+#ifdef CONFIG_USART3 /* DBGU */
+ at91_serial3_hw_init();
+#endif
+}
+
+#ifdef CONFIG_HAS_DATAFLASH
+void at91_spi0_hw_init(unsigned long cs_mask)
+{
+ at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
+ at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
+ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
+
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_SPI0);
+
+ if (cs_mask & (1 << 0)) {
+ at91_set_B_periph(AT91_PIN_PA5, 1);
+ }
+ if (cs_mask & (1 << 1)) {
+ at91_set_B_periph(AT91_PIN_PA3, 1);
+ }
+ if (cs_mask & (1 << 2)) {
+ at91_set_B_periph(AT91_PIN_PA4, 1);
+ }
+ if (cs_mask & (1 << 3)) {
+ at91_set_B_periph(AT91_PIN_PB11, 1);
+ }
+ if (cs_mask & (1 << 4)) {
+ at91_set_gpio_output(AT91_PIN_PA5, 1);
+ }
+ if (cs_mask & (1 << 5)) {
+ at91_set_gpio_output(AT91_PIN_PA3, 1);
+ }
+ if (cs_mask & (1 << 6)) {
+ at91_set_gpio_output(AT91_PIN_PA4, 1);
+ }
+ if (cs_mask & (1 << 7)) {
+ at91_set_gpio_output(AT91_PIN_PB11, 1);
+ }
+}
+
+void at91_spi1_hw_init(unsigned long cs_mask)
+{
+ at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */
+ at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
+ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
+
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_SPI1);
+
+ if (cs_mask & (1 << 0)) {
+ at91_set_A_periph(AT91_PIN_PB15, 1);
+ }
+ if (cs_mask & (1 << 1)) {
+ at91_set_A_periph(AT91_PIN_PB16, 1);
+ }
+ if (cs_mask & (1 << 2)) {
+ at91_set_A_periph(AT91_PIN_PB17, 1);
+ }
+ if (cs_mask & (1 << 3)) {
+ at91_set_A_periph(AT91_PIN_PB18, 1);
+ }
+ if (cs_mask & (1 << 4)) {
+ at91_set_gpio_output(AT91_PIN_PB15, 1);
+ }
+ if (cs_mask & (1 << 5)) {
+ at91_set_gpio_output(AT91_PIN_PB16, 1);
+ }
+ if (cs_mask & (1 << 6)) {
+ at91_set_gpio_output(AT91_PIN_PB17, 1);
+ }
+ if (cs_mask & (1 << 7)) {
+ at91_set_gpio_output(AT91_PIN_PB18, 1);
+ }
+}
+#endif
+
+#ifdef CONFIG_MACB
+void at91_macb_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PE21, 0); /* ETXCK_EREFCK */
+ at91_set_B_periph(AT91_PIN_PC25, 0); /* ERXDV */
+ at91_set_A_periph(AT91_PIN_PE25, 0); /* ERX0 */
+ at91_set_A_periph(AT91_PIN_PE26, 0); /* ERX1 */
+ at91_set_A_periph(AT91_PIN_PE27, 0); /* ERXER */
+ at91_set_A_periph(AT91_PIN_PE28, 0); /* ETXEN */
+ at91_set_A_periph(AT91_PIN_PE23, 0); /* ETX0 */
+ at91_set_A_periph(AT91_PIN_PE24, 0); /* ETX1 */
+ at91_set_A_periph(AT91_PIN_PE30, 0); /* EMDIO */
+ at91_set_A_periph(AT91_PIN_PE29, 0); /* EMDC */
+
+#ifndef CONFIG_RMII
+ at91_set_A_periph(AT91_PIN_PE22, 0); /* ECRS */
+ at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
+ at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
+ at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
+ at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
+ at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
+ at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
+ at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
+#endif
+}
+#endif
+
+#ifdef CONFIG_USB_OHCI_NEW
+void at91_uhp_hw_init(void)
+{
+ /* Enable VBus on UHP ports */
+ at91_set_gpio_output(AT91_PIN_PA21, 0);
+ at91_set_gpio_output(AT91_PIN_PA24, 0);
+}
+#endif
diff --git a/cpu/arm926ejs/at91/at91sam9263_macb.c b/cpu/arm926ejs/at91/at91sam9263_macb.c
deleted file mode 100644
index 4223d37..0000000
--- a/cpu/arm926ejs/at91/at91sam9263_macb.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop at leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-
-void at91_macb_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PE21, 0); /* ETXCK_EREFCK */
- at91_set_B_periph(AT91_PIN_PC25, 0); /* ERXDV */
- at91_set_A_periph(AT91_PIN_PE25, 0); /* ERX0 */
- at91_set_A_periph(AT91_PIN_PE26, 0); /* ERX1 */
- at91_set_A_periph(AT91_PIN_PE27, 0); /* ERXER */
- at91_set_A_periph(AT91_PIN_PE28, 0); /* ETXEN */
- at91_set_A_periph(AT91_PIN_PE23, 0); /* ETX0 */
- at91_set_A_periph(AT91_PIN_PE24, 0); /* ETX1 */
- at91_set_A_periph(AT91_PIN_PE30, 0); /* EMDIO */
- at91_set_A_periph(AT91_PIN_PE29, 0); /* EMDC */
-
-#ifndef CONFIG_RMII
- at91_set_A_periph(AT91_PIN_PE22, 0); /* ECRS */
- at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
- at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
- at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
- at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
- at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
- at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
- at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
-#endif
-}
diff --git a/cpu/arm926ejs/at91/at91sam9263_serial.c b/cpu/arm926ejs/at91/at91sam9263_serial.c
deleted file mode 100644
index 1076195..0000000
--- a/cpu/arm926ejs/at91/at91sam9263_serial.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop at leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-
-void at91_serial0_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US0);
-}
-
-void at91_serial1_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US1);
-}
-
-void at91_serial2_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US2);
-}
-
-void at91_serial3_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
-}
-
-void at91_serial_hw_init(void)
-{
-#ifdef CONFIG_USART0
- at91_serial0_hw_init();
-#endif
-
-#ifdef CONFIG_USART1
- at91_serial1_hw_init();
-#endif
-
-#ifdef CONFIG_USART2
- at91_serial2_hw_init();
-#endif
-
-#ifdef CONFIG_USART3 /* DBGU */
- at91_serial3_hw_init();
-#endif
-}
diff --git a/cpu/arm926ejs/at91/at91sam9263_spi.c b/cpu/arm926ejs/at91/at91sam9263_spi.c
deleted file mode 100644
index e52dd61..0000000
--- a/cpu/arm926ejs/at91/at91sam9263_spi.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop at leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-
-void at91_spi0_hw_init(unsigned long cs_mask)
-{
- at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
- at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
- at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
-
- /* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_SPI0);
-
- if (cs_mask & (1 << 0)) {
- at91_set_B_periph(AT91_PIN_PA5, 1);
- }
- if (cs_mask & (1 << 1)) {
- at91_set_B_periph(AT91_PIN_PA3, 1);
- }
- if (cs_mask & (1 << 2)) {
- at91_set_B_periph(AT91_PIN_PA4, 1);
- }
- if (cs_mask & (1 << 3)) {
- at91_set_B_periph(AT91_PIN_PB11, 1);
- }
- if (cs_mask & (1 << 4)) {
- at91_set_gpio_output(AT91_PIN_PA5, 1);
- }
- if (cs_mask & (1 << 5)) {
- at91_set_gpio_output(AT91_PIN_PA3, 1);
- }
- if (cs_mask & (1 << 6)) {
- at91_set_gpio_output(AT91_PIN_PA4, 1);
- }
- if (cs_mask & (1 << 7)) {
- at91_set_gpio_output(AT91_PIN_PB11, 1);
- }
-}
-
-void at91_spi1_hw_init(unsigned long cs_mask)
-{
- at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */
- at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
- at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
-
- /* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_SPI1);
-
- if (cs_mask & (1 << 0)) {
- at91_set_A_periph(AT91_PIN_PB15, 1);
- }
- if (cs_mask & (1 << 1)) {
- at91_set_A_periph(AT91_PIN_PB16, 1);
- }
- if (cs_mask & (1 << 2)) {
- at91_set_A_periph(AT91_PIN_PB17, 1);
- }
- if (cs_mask & (1 << 3)) {
- at91_set_A_periph(AT91_PIN_PB18, 1);
- }
- if (cs_mask & (1 << 4)) {
- at91_set_gpio_output(AT91_PIN_PB15, 1);
- }
- if (cs_mask & (1 << 5)) {
- at91_set_gpio_output(AT91_PIN_PB16, 1);
- }
- if (cs_mask & (1 << 6)) {
- at91_set_gpio_output(AT91_PIN_PB17, 1);
- }
- if (cs_mask & (1 << 7)) {
- at91_set_gpio_output(AT91_PIN_PB18, 1);
- }
-}
diff --git a/cpu/arm926ejs/at91/at91sam9263_usb.c b/cpu/arm926ejs/at91/at91sam9263_usb.c
deleted file mode 100644
index ff5593b..0000000
--- a/cpu/arm926ejs/at91/at91sam9263_usb.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop at leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-
-void at91_uhp_hw_init(void)
-{
- /* Enable VBus on UHP ports */
- at91_set_gpio_output(AT91_PIN_PA21, 0);
- at91_set_gpio_output(AT91_PIN_PA24, 0);
-}
diff --git a/cpu/arm926ejs/at91/at91sam9rl_serial.c b/cpu/arm926ejs/at91/at91sam9rl_devices.c
similarity index 70%
rename from cpu/arm926ejs/at91/at91sam9rl_serial.c
rename to cpu/arm926ejs/at91/at91sam9rl_devices.c
index 99ce418..ebed193 100644
--- a/cpu/arm926ejs/at91/at91sam9rl_serial.c
+++ b/cpu/arm926ejs/at91/at91sam9rl_devices.c
@@ -74,3 +74,40 @@ void at91_serial_hw_init(void)
at91_serial3_hw_init();
#endif
}
+
+#ifdef CONFIG_HAS_DATAFLASH
+void at91_spi0_hw_init(unsigned long cs_mask)
+{
+ at91_set_A_periph(AT91_PIN_PA25, 0); /* SPI0_MISO */
+ at91_set_A_periph(AT91_PIN_PA26, 0); /* SPI0_MOSI */
+ at91_set_A_periph(AT91_PIN_PA27, 0); /* SPI0_SPCK */
+
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_SPI);
+
+ if (cs_mask & (1 << 0)) {
+ at91_set_A_periph(AT91_PIN_PA28, 1);
+ }
+ if (cs_mask & (1 << 1)) {
+ at91_set_B_periph(AT91_PIN_PB7, 1);
+ }
+ if (cs_mask & (1 << 2)) {
+ at91_set_A_periph(AT91_PIN_PD8, 1);
+ }
+ if (cs_mask & (1 << 3)) {
+ at91_set_B_periph(AT91_PIN_PD9, 1);
+ }
+ if (cs_mask & (1 << 4)) {
+ at91_set_gpio_output(AT91_PIN_PA28, 1);
+ }
+ if (cs_mask & (1 << 5)) {
+ at91_set_gpio_output(AT91_PIN_PB7, 1);
+ }
+ if (cs_mask & (1 << 6)) {
+ at91_set_gpio_output(AT91_PIN_PD8, 1);
+ }
+ if (cs_mask & (1 << 7)) {
+ at91_set_gpio_output(AT91_PIN_PD9, 1);
+ }
+}
+#endif
diff --git a/cpu/arm926ejs/at91/at91sam9rl_spi.c b/cpu/arm926ejs/at91/at91sam9rl_spi.c
deleted file mode 100644
index 389d6d8..0000000
--- a/cpu/arm926ejs/at91/at91sam9rl_spi.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop at leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-
-void at91_spi0_hw_init(unsigned long cs_mask)
-{
- at91_set_A_periph(AT91_PIN_PA25, 0); /* SPI0_MISO */
- at91_set_A_periph(AT91_PIN_PA26, 0); /* SPI0_MOSI */
- at91_set_A_periph(AT91_PIN_PA27, 0); /* SPI0_SPCK */
-
- /* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_SPI);
-
- if (cs_mask & (1 << 0)) {
- at91_set_A_periph(AT91_PIN_PA28, 1);
- }
- if (cs_mask & (1 << 1)) {
- at91_set_B_periph(AT91_PIN_PB7, 1);
- }
- if (cs_mask & (1 << 2)) {
- at91_set_A_periph(AT91_PIN_PD8, 1);
- }
- if (cs_mask & (1 << 3)) {
- at91_set_B_periph(AT91_PIN_PD9, 1);
- }
- if (cs_mask & (1 << 4)) {
- at91_set_gpio_output(AT91_PIN_PA28, 1);
- }
- if (cs_mask & (1 << 5)) {
- at91_set_gpio_output(AT91_PIN_PB7, 1);
- }
- if (cs_mask & (1 << 6)) {
- at91_set_gpio_output(AT91_PIN_PD8, 1);
- }
- if (cs_mask & (1 << 7)) {
- at91_set_gpio_output(AT91_PIN_PD9, 1);
- }
-}
--
1.6.1.3
More information about the U-Boot
mailing list