[U-Boot] [PATCH v8] Marvell Kirkwood family SOC support

[Stefan Roese]

On Wednesday 20 May 2009 15:40:00 Prafulla Wadaskar wrote:
> > I would like to give your Kirkwood support a try and start
> > compiling the latest version before trying to port a custom
> > board. Now I'm failing to compile the latest version posted
> > on the list. Most likely I missed some patches or applied
> > them to the wrong git repository.
>
> Thanks Stefan, your efforts will help me a lot

Sure. I'll try to help out if possible. But I'm only starting into this 
project right now. So please don't expect any "real output" soon. But I 
definitely can give some feedback...

> > I tried it on u-boot/next and on u-boot-arm/next. Both
>
> I have used u-boot-arm/next pls use the same.

OK, understood.

> > failed. I applied those
> > patches:
> >
> > [PATCH v8] Marvell Kirkwood family SOC support [PATCH v9]
> > Marvell MV88F6281GTW_GE Board support [PATCH v3] Gbe
> > Controller driver support for kirkwood SOCs
> >
> > It would be great if you could tell me what I am missing here
> > (additional patches or wrong repository?).
>
> You will need additional two patches as mentioned below
> http://git.denx.de/?p=u-boot/u-boot-blackfin.git;a=commit;h=12cedeb9589ef12
>03e3308e80b11e5ee73261ced
> http://lists.denx.de/pipermail/u-boot/2009-May/052905.html
>
> Apart from this pls add below line to drivers/net/kirkwood_egiga.c remove
> below mentioned errors #include <asm/arch/kirkwood.h>
>
> I hope build will be through... Best of Luck

Yes, this works. Thanks a lot.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================