[U-Boot] [PATCH] 74xx_7xx: Add CPCI adapter/target support for the CPCI750

Stefan Roese sr at denx.de
Thu May 14 07:26:09 CEST 2009


The CPCI750 can be built as CPCI host or adapter/target board. This patch
adds support for runtime detection of those variants.

Signed-off-by: Stefan Roese <sr at denx.de>
Cc: Reinhard Arlt <reinhard.arlt at esd-electronics.com>
---
 board/esd/cpci750/cpci750.c |  108 +++++++++++++++++++++++++++++++++++++++----
 board/esd/cpci750/ide.c     |    4 +-
 board/esd/cpci750/pci.c     |   57 ++++++++++++++++------
 include/configs/CPCI750.h   |    5 ++-
 4 files changed, 147 insertions(+), 27 deletions(-)

diff --git a/board/esd/cpci750/cpci750.c b/board/esd/cpci750/cpci750.c
index 4826633..6641304 100644
--- a/board/esd/cpci750/cpci750.c
+++ b/board/esd/cpci750/cpci750.c
@@ -122,6 +122,9 @@ static char show_config_tab[][15] = {{"PCI0DLL_2     "},  /* 31 */
 
 extern flash_info_t flash_info[];
 
+extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
+extern int do_bootvx (cmd_tbl_t *, int, int, char *[]);
+
 /* ------------------------------------------------------------------------- */
 
 /* this is the current GT register space location */
@@ -137,6 +140,15 @@ void board_prebootm_init (void);
 unsigned int INTERNAL_REG_BASE_ADDR = CONFIG_SYS_GT_REGS;
 int display_mem_map (void);
 
+/*
+ * Skip video initialization on slave variant.
+ * This function will overwrite the weak default in ct6900.c
+ */
+int board_video_skip(void)
+{
+	return CPCI750_SLAVE_TEST;
+}
+
 /* ------------------------------------------------------------------------- */
 
 /*
@@ -184,6 +196,7 @@ original ppcboot 1.1.6 source end */
 static void gt_pci_config (void)
 {
 	unsigned int stat;
+	unsigned int data;
 	unsigned int val = 0x00fff864;	/* DINK32: BusNum 23:16,  DevNum 15:11, FuncNum 10:8, RegNum 7:2 */
 
 	/* In PCIX mode devices provide their own bus and device numbers. We query the Discovery II's
@@ -251,10 +264,11 @@ static void gt_pci_config (void)
 
 /*ronen update the pci internal registers base address.*/
 #ifdef MAP_PCI
-	for (stat = 0; stat <= PCI_HOST1; stat++)
-		pciWriteConfigReg (stat,
-				   PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS,
-				   SELF, CONFIG_SYS_GT_REGS);
+	for (stat = 0; stat <= PCI_HOST1; stat++) {
+ 		data = pciReadConfigReg(stat, PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS, SELF);
+ 		data = (data & 0x0f) | CONFIG_SYS_GT_REGS;
+ 		pciWriteConfigReg (stat, PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS, SELF, data);
+ 	}
 #endif
 
 }
@@ -448,13 +462,16 @@ int misc_init_r ()
 
 void after_reloc (ulong dest_addr, gd_t * gd)
 {
+	memoryMapDeviceSpace (BOOT_DEVICE, CONFIG_SYS_BOOT_SPACE,
+			      CONFIG_SYS_BOOT_SIZE);
 
-  memoryMapDeviceSpace (BOOT_DEVICE, CONFIG_SYS_BOOT_SPACE, CONFIG_SYS_BOOT_SIZE);
+	display_mem_map ();
+	GT_REG_WRITE (PCI_0BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe);
+	GT_REG_WRITE (PCI_1BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe);
 
-  display_mem_map ();
-  /* now, jump to the main ppcboot board init code */
-  board_init_r (gd, dest_addr);
-  /* NOTREACHED */
+	/* now, jump to the main ppcboot board init code */
+	board_init_r (gd, dest_addr);
+	/* NOTREACHED */
 }
 
 /* ------------------------------------------------------------------------- */
@@ -538,6 +555,79 @@ int display_mem_map (void)
 	return (0);
 }
 
+/*
+ * Command loadpci: wait for signal from host and boot image.
+ */
+int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	volatile unsigned int *ptr;
+	int count = 0;
+	int count2 = 0;
+	int status;
+	char addr[16];
+	char str[] = "\\|/-";
+	char *local_args[2];
+
+	/*
+	 * Mark sync address
+	 */
+	ptr = 0;
+	ptr[0] = 0xffffffff;
+	ptr[1] = 0xffffffff;
+	puts("\nWaiting for image from pci host -");
+
+	/*
+	 * Wait for host to write the start address
+	 */
+	while (*ptr == 0xffffffff) {
+		count++;
+		if (!(count % 100)) {
+			count2++;
+			putc(0x08); /* backspace */
+			putc(str[count2 % 4]);
+		}
+
+		/* Abort if ctrl-c was pressed */
+		if (ctrlc()) {
+			puts("\nAbort\n");
+			return 0;
+		}
+
+		udelay(1000);
+	}
+
+	sprintf(addr, "%08x", *ptr);
+	printf("\nBooting Image at addr 0x%s ...\n", addr);
+	setenv("loadaddr", addr);
+
+	switch (ptr[1] == 0) {
+	case 0:
+		/*
+		 * Boot image via bootm
+		 */
+		local_args[0] = argv[0];
+		local_args[1] = NULL;
+		status = do_bootm (cmdtp, 0, 1, local_args);
+		break;
+	case 1:
+		/*
+		 * Boot image via bootvx
+		 */
+		local_args[0] = argv[0];
+		local_args[1] = NULL;
+		status = do_bootvx (cmdtp, 0, 1, local_args);
+		break;
+	}
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	loadpci,	1,	1,	do_loadpci,
+	"loadpci - Wait for pci-image and boot it\n",
+	NULL
+	);
+
 /* DRAM check routines copied from gw8260 */
 
 #if defined (CONFIG_SYS_DRAM_TEST)
diff --git a/board/esd/cpci750/ide.c b/board/esd/cpci750/ide.c
index 9bdc523..8ec2346 100644
--- a/board/esd/cpci750/ide.c
+++ b/board/esd/cpci750/ide.c
@@ -39,6 +39,8 @@ int ide_preinit (void)
 	int l;
 
 	status = 1;
+ 	if (CPCI750_SLAVE_TEST != 0)
+		return status;
 	for (l = 0; l < CONFIG_SYS_IDE_MAXBUS; l++) {
 		ide_bus_offset[l] = -ATA_STATUS;
 	}
@@ -57,7 +59,7 @@ int ide_preinit (void)
 		ide_bus_offset[1] &= 0xfffffffe;
 		ide_bus_offset[1] += CONFIG_SYS_PCI0_IO_SPACE;
 	}
-	return (status);
+	return status;
 }
 
 void ide_set_reset (int flag) {
diff --git a/board/esd/cpci750/pci.c b/board/esd/cpci750/pci.c
index bfc7e55..552ad92 100644
--- a/board/esd/cpci750/pci.c
+++ b/board/esd/cpci750/pci.c
@@ -768,7 +768,8 @@ static int gt_read_config_dword (struct pci_controller *hose,
 	int bus = PCI_BUS (dev);
 
 	if ((bus == local_buses[0]) || (bus == local_buses[1])) {
-		*value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr, offset,
+	        *value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr,
+					   offset | (PCI_FUNC(dev) << 8),
 					   PCI_DEV (dev));
 	} else {
 		*value = pciOverBridgeReadConfigReg ((PCI_HOST) hose->
@@ -785,11 +786,13 @@ static int gt_write_config_dword (struct pci_controller *hose,
 	int bus = PCI_BUS (dev);
 
 	if ((bus == local_buses[0]) || (bus == local_buses[1])) {
-		pciWriteConfigReg ((PCI_HOST) hose->cfg_addr, offset,
+		pciWriteConfigReg ((PCI_HOST) hose->cfg_addr,
+				   offset | (PCI_FUNC(dev) << 8),
 				   PCI_DEV (dev), value);
 	} else {
 		pciOverBridgeWriteConfigReg ((PCI_HOST) hose->cfg_addr,
-					     offset, PCI_DEV (dev), bus,
+					     offset | (PCI_FUNC(dev) << 8),
+					     PCI_DEV (dev), bus,
 					     value);
 	}
 	return 0;
@@ -803,6 +806,9 @@ static void gt_setup_ide (struct pci_controller *hose,
 	u32 bar_response, bar_value;
 	int bar;
 
+	if (CPCI750_SLAVE_TEST != 0)
+		return;
+
 	for (bar = 0; bar < 6; bar++) {
 		/*ronen different function for 3rd bank. */
 		unsigned int offset =
@@ -829,6 +835,9 @@ static void gt_setup_cpcidvi (struct pci_controller *hose,
 {
 	u32		  bar_value, pci_response;
 
+	if (CPCI750_SLAVE_TEST != 0)
+		return;
+
 	pci_hose_read_config_dword (hose, dev, PCI_COMMAND, &pci_response);
 	pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0, 0xffffffff);
 	pci_hose_read_config_dword (hose, dev, PCI_BASE_ADDRESS_0, &pci_response);
@@ -907,6 +916,7 @@ struct pci_controller pci1_hose = {
 void pci_init_board (void)
 {
 	unsigned int command;
+	unsigned int slave;
 #ifdef CONFIG_PCI_PNP
 	unsigned int bar;
 #endif
@@ -918,6 +928,8 @@ void pci_init_board (void)
 	gt_cpcidvi_rom.base = 0;
 #endif
 
+	slave = CPCI750_SLAVE_TEST;
+
 	pci0_hose.config_table = gt_config_table;
 	pci1_hose.config_table = gt_config_table;
 
@@ -953,27 +965,40 @@ void pci_init_board (void)
 	pci0_hose.cfg_addr = (unsigned int *) PCI_HOST0;
 
 	pci_register_hose (&pci0_hose);
-	pciArbiterEnable (PCI_HOST0);
-	pciParkingDisable (PCI_HOST0, 1, 1, 1, 1, 1, 1, 1);
-	command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
-	command |= PCI_COMMAND_MASTER;
-	pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
-	command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
-	command |= PCI_COMMAND_MEMORY;
-	pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
+	if (slave == 0) {
+		pciArbiterEnable (PCI_HOST0);
+		pciParkingDisable (PCI_HOST0, 1, 1, 1, 1, 1, 1, 1);
+		command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
+		command |= PCI_COMMAND_MASTER;
+		pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
+		command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
+		command |= PCI_COMMAND_MEMORY;
+		pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
 
 #ifdef CONFIG_PCI_PNP
-	pciauto_config_init(&pci0_hose);
-	pciauto_region_allocate(pci0_hose.pci_io, 0x400, &bar);
+		pciauto_config_init(&pci0_hose);
+		pciauto_region_allocate(pci0_hose.pci_io, 0x400, &bar);
 #endif
 #ifdef CONFIG_PCI_SCAN_SHOW
-	printf("PCI:   Bus Dev VenId DevId Class Int\n");
+		printf("PCI:   Bus Dev VenId DevId Class Int\n");
 #endif
-	pci0_hose.last_busno = pci_hose_scan_bus (&pci0_hose, pci0_hose.first_busno);
+		pci0_hose.last_busno = pci_hose_scan_bus (&pci0_hose,
+							  pci0_hose.first_busno);
 
 #ifdef DEBUG
-	gt_pci_bus_mode_display (PCI_HOST1);
+		gt_pci_bus_mode_display (PCI_HOST1);
 #endif
+	} else {
+		pciArbiterDisable (PCI_HOST0);
+		pciParkingDisable (PCI_HOST0, 1, 1, 1, 1, 1, 1, 1);
+		command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
+		command |= PCI_COMMAND_MASTER;
+		pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
+		command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
+		command |= PCI_COMMAND_MEMORY;
+		pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
+		pci0_hose.last_busno = pci0_hose.first_busno;
+	}
 	pci1_hose.first_busno = pci0_hose.last_busno + 1;
 	pci1_hose.last_busno = 0xff;
 	pci1_hose.current_busno = pci1_hose.first_busno;
diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h
index 8494faa..d516c3c 100644
--- a/include/configs/CPCI750.h
+++ b/include/configs/CPCI750.h
@@ -76,7 +76,8 @@
 
 #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
-#define CONFIG_AUTO_COMPLETE 1
+#define CONFIG_CMDLINE_EDITING		/* add command line history	*/
+#define CONFIG_AUTO_COMPLETE		/* add autocompletion support	*/
 
 /* Define which ETH port will be used for connecting the network */
 #define CONFIG_SYS_ETH_PORT		ETH_0
@@ -626,4 +627,6 @@
 
 #define CONFIG_SYS_BOARD_ASM_INIT	1
 
+#define CPCI750_SLAVE_TEST	(((in8(0xf0300000) & 0x80) == 0) ? 0 : 1)
+
 #endif	/* __CONFIG_H */
-- 
1.6.2.5



More information about the U-Boot mailing list