[U-Boot] [PATCH 06/13] Add support for the AT91RM9200EK Board.

[Haavard Skinnemoen]

On Fri, 27 Mar 2009 23:30:19 +0100
Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com> wrote:

> diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
> index 631b969..175d82a 100644
> --- a/drivers/mtd/cfi_flash.c
> +++ b/drivers/mtd/cfi_flash.c
> @@ -1788,13 +1788,10 @@ static void flash_fixup_atmel(flash_info_t
> *info, struct cfi_qry *qry) 
>  	/* AT49BV6416(T) list the erase regions in the wrong order.
>  	 * However, the device ID is identical with the non-broken
> -	 * AT49BV642D since u-boot only reads the low byte (they
> -	 * differ in the high byte.) So leave out this fixup for now.
> +	 * AT49BV642D they differ in the high byte.
>  	 */
> -#if 0
>  	if (info->device_id == 0xd6 || info->device_id == 0xd2)
>  		reverse_geometry = !reverse_geometry;
> -#endif

Hmm...was this shortcoming actually fixed or does this change bugger up
a large number of currently working boards?

Haavard