[U-Boot] [PATCH 3/3] TQM834x: use buffered writes to accelerate writing to flash
Wolfgang Denk
wd at denx.de
Thu May 14 23:18:35 CEST 2009
Also enable display of 'E'mpty sectors in "lsinfo" output.
Signed-off-by: Wolfgang Denk <wd at denx.de>
---
include/configs/TQM834x.h | 7 +++----
1 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index 5590d2e..c504ecb 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -78,13 +78,12 @@
* FLASH on the Local Bus
*/
#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */
-#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
+#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
#undef CONFIG_SYS_FLASH_CHECKSUM
#define CONFIG_SYS_FLASH_BASE 0x80000000 /* start of FLASH */
#define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size in MB */
-
-/* buffered writes in the AMD chip set is not supported yet */
-#undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sectors */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
/*
* FLASH bank number detection
--
1.6.0.6
More information about the U-Boot
mailing list